 Proceedings
 Open Access
 Published:
Inference of gene regulatory subnetworks from time course gene expression data
BMC Bioinformatics volume 13, Article number: S3 (2012)
Abstract
Background
Identifying gene regulatory network (GRN) from time course gene expression data has attracted more and more attentions. Due to the computational complexity, most approaches for GRN reconstruction are limited on a small number of genes and low connectivity of the underlying networks. These approaches can only identify a single network for a given set of genes. However, for a largescale gene network, there might exist multiple potential subnetworks, in which genes are only functionally related to others in the subnetworks.
Results
We propose the network and community identification (NCI) method for identifying multiple subnetworks from gene expression data by incorporating community structure information into GRN inference. The proposed algorithm iteratively solves two optimization problems, and can promisingly be applied to largescale GRNs. Furthermore, we present the efficient Block PCA method for searching communities in GRNs.
Conclusions
The NCI method is effective in identifying multiple subnetworks in a largescale GRN. With the splitting algorithm, the Block PCA method shows a promosing attempt for exploring communities in a largescale GRN.
Background
Rapid advances in highthroughput DNA microarray technology generate a huge amount of time course gene expression data which, in turn, calls for efficient computational models to characterize the network of genetic regulatory interactions. A number of methods have been proposed to infer GRNs from gene expression data. Boolean networks [1] use two states, "ON" or "OFF" to represent the state of each gene, and each state at the next time step is determined by Boolean logical rules. Bayesian Networks [2] infer causal relationships between two genes according to conditional probability functions. The stochastic nature makes them more accurate in modeling the dynamics and nonlinearity of gene regulation in largescale systems. Bayesian Networks, however, usually do not include cycles and, thus, are difficult to deal with feedback motifs. Ordinary differential equations (ODEs) models [3–5] overcome this problem by modeling GRNs as a set of differential equations. Some other models such as signed directed graphs, multiple regression, state space model, etc., are addressed in the survey [6].
Whereas most of the existing work focuses on smallsized GRNs, limited attention has been given to interactions among large scale genes. Conventional approaches are usually designed for the network with connectivity less than a small fixed number [7]. Computational complexity is a major obstacle in reconstruction of large scale GRNs as determining the parameters in such a network is timeconsuming. Sparsity is a common assumption used in modeling GRNs to reduce the computational complexity. Typically, in a sparse network, one gene interacts with only a couple of genes [7].
Recently, Yuan et al. [8] proposed a directed partial correlation (DPC) method for regulatory network inference on largescale gene data. The DPC method combines the directed network inference approach and Granger causality concept for causal inference on time series data to reconstruct largescale GRNs. Although modular discovery was provided by biclustering in gene expression data, the DPC method cannot present multiple subnetworks simultaneously.
We propose the NCI method for subnetwork identification by detecting community structures from largescale gene expression data. Usually, GRNs have community structures: genes in the same groups are found with high density of "withingroup" interactions and genes in different groups with low density of "betweengroup" interactions [9]. Many algorithms have been proposed to detect community structures by clustering [9–15]. To accomodate the largescale GRN inference, we particularly propose a block principal component analysis (Block PCA) method, which explores community structure information for the NCI method.
The NCI method repeats two steps: (1) Nstep: identify possible gene regulatory networks; (2) Cstep: estimate community structure. At the Nstep, a convex quadratic programming, formulated for the community structure, is solved to infer possible GRNs. This quadratic programming can be identically divided into n (the total number of genes) subproblems, each of which has a much smaller dimension, and, thus, adapt to largescale networks. At the Cstep, the NCI method estimates community structure from the GRNs identified at the first step. When the algorithm terminates, a network with community structures is obtained.
Methods
An ODE model for GRNs
The processes of transcription and translation in a GRN consisting of n genes can be modeled as the following dynamic system:
where vector x = [x_{1}, x_{2}, ..., x_{ n }]^{T} ∈ ℝ^{n} is the concentration of mRNAs of n genes, C = diag [c_{1},c_{2}, ...,  c_{ n }] ∈ R^{n × n}, c_{ i } represents the degradation rate of gene i, r = [r_{1}, r_{2}, ..., r_{ n }]^{T} ∈ ℝ^{n} is the reaction rates which is a function of concentrations of some mRNAs, and matrix S ∈ R^{n × n} represents the stoichiometric matrix of the biological network. For simplicity, one can assume the reaction rate r is a linear combination of mRNAs concentrations. Let F∈ R^{n × n} be the coefficient matrix. Then,
By substituting (2) into (1), we have
A standard discretization of system (3) by using the zeroorder hold method on m observation points for a given sampling time Δt is
where A = e^{C Δt}+ (e^{C Δt} I)C^{1}SF.
Let X ∈ ℝ^{n × m} be a matrix of gene expression data, with the columns being the measured gene expression levels at m time points, and n being the number of genes. Let X_{1} and X_{2} be the submatrices of X made up by the first m  1 columns and last m  1 columns of X, respectively. According to [16], the gene regulatory network can be inferred by solving the following optimization problem:
where ·_{2} is the Euclidean norm. Stability is usually used as a criterion to determine the qualification of the inferred GRN. For discrete models, A = (a_{ ij })_{ n × m }is stable if
Moreover, since the network is commonly recognized as sparse, l_{1} regularization is added to Eq. (5) to obtain a sparse matrix A. Hence, with the sparsity and stability conditions, (5) becomes
where γ is a positive scalar, A_{1} = ∑_{ i, j }a_{ ij } is the l_{1}norm of matrix A.
The NCI method
Since rows of A are independent in the objective function and constraints, problem (7) can be divided into n subproblems and solved individually [16]. However, such a solution does not consider the information of community structure which implies multiple subnetworks. In this section, we propose the NCI method to overcome this problem. An observation is that interactions between genes in a community occur more frequently than those between different communities. We introduce a weighted matrix W = (w_{ ij })_{ n × m }to distinguish genes in the communities with those outside. w_{ ij } is assigned a small positive value or zero if gene i and j located in the same community; a relatively large value, otherwise.
By adding term 〈W, A〉 to (7), we have
Where μ > 0 is a penalty parameter, A = (a_{ ij })_{ n × m }, 〈W, A〉 = trace (W^{T} A) = ∑_{ i, j }w_{ ij }a_{ ij }. All elements of matrix W are nonnegative.
We propose a clustering method, named Block PCA, to update weight matrix W. With Block PCA, we can obtain matrix L*, reflecting the community structure of its corresponding network. Then, weight matrix W can be updated by
Where ${\mathbb{1}}_{n,n}\in {\mathbb{R}}^{n\times n}$ is the matrix with all 1's.
For example, consider a network with five nodes and
Node 1, 2, and 3 form a community, and node 4 and 5 form another community. Particularly, we apply sparse singular value decomposition (SSVD) [17] on a general L* to identify the communities in GRNs. The NCI method is summarized in Algorithm 1.
Some additional details about Algorithm 1:
1. Stop criteria. The NCI algorithm stops when either of the following two criteria meet. (1) Weighted matrix W converges, that is, W^{(k)} W^{(k+1)} ≤ tol for a predefined constant tol > 0, where W^{(k)}denotes W at iteration k; (2) The number of iteration reaches the threshold.
2. The efficiency of the algorithm mainly depends on the estimation of the community structure of the underlying GRN. Since matrix A in (8) provides a base for estimation of community structure L* computed by (12), a poor estimation of A may result in an inaccurate W. Hence, instead of using only one estimation of A, we average out the errors by calculating a series of estimations with different arguments γ in (8) and combining them together. More specifically, we choose a set of γ_{1}, ..., γ_{ q } and compute the corresponding solutions A^{1}, ..., A^{q}. Then, A in Step 1 of Algorithm 1 is set as
After the iteration terminates, model (8) is solved again to compute the matrix A with γ = γ_{ τ }, where γ_{ τ }, is a parameter in Algorithm 1.
3. The complexity of the subproblem is our primary concern about the design of the NCI algorithm. Since the subproblems may be called iteratively in Algorithm 1, the complexity of the NCI algorithm is determined by those subproblems. Both subproblems (8) and the Block PCA model are convex, and can be efficiently solved by CVX [18] and and the proposed splitting algorithm, respectively. As aforementioned, model (8) is dividable: rows of A in the objective function and the constraints are independent. Hence, it is equivalent to n subproblems:
for i = 1, ..., n, where ${X}_{2,i}^{T}$ is the ith row of the matrix ${X}_{2},\phantom{\rule{0.3em}{0ex}}\mathbb{1}={\left[1,\phantom{\rule{2.77695pt}{0ex}}\dots ,\phantom{\rule{2.77695pt}{0ex}}1\right]}^{T}\in {\mathbb{R}}^{n},{w}_{i}^{T},{a}_{i}^{T}$ is the ith row of W and A, respectively. Subproblem (10) can be transformed into a standard (convex) quadratic programming, and solved by software packages such as Mosek or CVX [18].
The Block PCA model
The Block PCA model is motivated by Robust PCA model [19]
which L_{*} is the nuclear norm of the matrix L, and D is a given matrix.
The block PCA aims to seek a block submatrix in D by solving optimization problem
where W 1 is a weight matrix with all elements nonnegative.
In Block PCA, D ∈ ℝ^{n, n} is set to be matrix ${1}_{n,n}\in {\mathbb{R}}^{n\times n}$ with all 1's, λ_{2} is constantly set as $1/\phantom{\rule{0.3em}{0ex}}\sqrt{n},$ and λ_{1}∈(0, λ_{2}). For a network with n nodes, we define weight matrix W 1 = (w 1_{ ij })_{ n × n }, where
p_{ ij } is the length of the shortest path between the node i and j, p_{0} ≥ 0 is a parameter less than the diameter of the network.
As in Robust PCA (11), the nuclear norm  · _{*} usually induces a low rank matrix and the l_{1} norm  · _{1} induces a sparse matrix [19, 20]. The constraint D = L + E enforces to split matrix D into a low rank matrix L and a sparse matrix E. Different with Robust PCA, the Block PCA adds an extra term λ_{1} 〈W 1, L〉 = λ_{1} ∑w 1_{ ij }·L_{ ij } to (11). The nonnegative weight matrix W 1 stands for the prior knowledge about low rank matrix L.
Splitting algorithm for solving Block PCA
Block PCA model (12) can be transformed to a linear semidefinite programming (SDP)
However, this transformation increases the size of the variable matrix from n × n to 2n × 2n. Existing SDP solvers such as CVX [18] can not solve largescale SDP problems. Instead, we solve Block PCA problem (12) by extending the splitting method [21] for optimization problem
Where θ_{ i }: ${\mathbb{R}}^{{n}_{i}}\to \mathbb{R}$ are closed convex functions, ${A}_{i}\in {\mathbb{R}}^{l\times {n}_{i}}$, b∈ℝ^{l}.
Note that Block PCA (12) can be recast as
By letting θ_{1}(·): = ·_{*}, θ_{2}(·): = λ_{1}〈W 1, ·〉, θ_{3}(·): = λ_{2}·_{1}, and $b=\left[\begin{array}{c}\hfill D\hfill \\ \hfill 0\hfill \end{array}\right],{\mathcal{A}}_{1}L=\left[\begin{array}{c}\hfill L\hfill \\ \hfill L\hfill \end{array}\right],{\mathcal{A}}_{2}U=\left[\begin{array}{c}\hfill 0\hfill \\ \hfill U\hfill \end{array}\right]$ and ${\mathcal{A}}_{3}E=\left[\begin{array}{c}\hfill E\hfill \\ \hfill 0\hfill \end{array}\right],$ Block PCA (12) can be treated as a generalized case of (15) with matrix variables L, E, U and linear operators ${\mathcal{A}}_{1},\phantom{\rule{0.3em}{0ex}}{\mathcal{A}}_{2},\phantom{\rule{0.3em}{0ex}}\phantom{\rule{0.3em}{0ex}}{\mathcal{A}}_{3}.$
Under the framework of [21], we next present an implementable splitting algorithm for the Block PCA model (12).
Define operator
t ∈ ℝ and ε > 0. It can be extended to an arbitrary matrix X ∈ ℝ^{n, n}by applying elementwise operation, denoted by ${\mathcal{S}}_{\epsilon}\left[X\right]$.
Consider the sigular value decompostion (SVD) of the matrix X
where U and V are orthogonal matrices consisting of singular vectors, and Σ is the diagnal matrix made up of the singular values. For each τ > 0, the softthresholding operator ${\mathcal{D}}_{\tau}$ is defined as [22]
More generally, for a matrix W ∈ ℝ^{n, n} with all elements nonnegative, we define
Particularly, if W is the matrix with all elements 1, X_{ w }degenerates to X_{1}, and ${\mathcal{S}}_{\epsilon W}\left[X\right]$ degenerates to ${\mathcal{S}}_{\epsilon}\left[X\right]$.
Let $\beta >0,\mu >2,{\Lambda}^{k}=\left[\begin{array}{c}\hfill \begin{array}{c}{\Lambda}_{1}^{k}\\ {\Lambda}_{2}^{k}\end{array}\hfill \end{array}\right],$ where ${\Lambda}_{1}^{k},{\Lambda}_{2}^{k}\in {\mathbb{R}}^{n,n}$. Then, for the calculated (L^{k}, E^{k}, U^{k}, Λ^{k}), the steps for each iterative (L^{k+1}, E^{k+1}, U^{k+1},Λ^{k+1}) for solving (12) are as follows.
Step 1. Solve L^{k+1}by the following problem.
By Theorem 2.1 in [22], the unique solution of (21) is
where $\tau =\frac{1}{2\beta},Y=\frac{1}{2}\left[D{E}^{k}+{U}^{k}\right]+\frac{1}{2\beta}\left[{\Lambda}_{1}^{k}+{\Lambda}_{2}^{k}\right].$
Step 2. Update the Lagrangian multiplier ${\Lambda}^{k+\frac{1}{2}}\phantom{\rule{0.3em}{0ex}}\mathsf{\text{by}}\phantom{\rule{0.3em}{0ex}}{L}^{k+1}.$
Step 3. Solve U^{k+1}, E^{k+1}by the following two problem.
By the property of the operator S_{ τ } [Y ] shown in [23],
where $\tau =\frac{1}{\beta \mu},\mathit{\u0168}={U}^{k}\frac{1}{\beta \mu}{\Lambda}_{2}^{k+\frac{1}{2}},$
where $\alpha =\frac{{\lambda}_{2}}{\beta \mu},\mathit{\u1ebc}={E}^{k}+\frac{1}{\beta \mu}{\Lambda}_{1}^{k+\frac{1}{2}}.$
Step 4. Update the Lagrange multiplier Λ^{k+1}by L^{k+1}, E^{k+1}.
The algorithm can be terminated when
and
for tolerance ε_{1} > 0, ε_{2} > 0, where ΔL^{k} = L^{k+1} L^{k}, ΔE^{k} = E^{k+1} E^{k}, ΔU^{k} = U^{k+1} U^{k}.
The splitting algorithm for solving Block PCA model is summarized in Algorithm 2.
In Algorithm 2, arguments β and μ are currently set constant. Adaptive settings of these arguments may speed up the convergence. The discussion of this issue in a simple case can be referred to [24].
Results and discussion
We examine the NCI method based on two synthetic gene regulatory networks with different sizes. The GRN in first test is a smallsized network consisting of 14 genes and 27 interactions. There exist two communities in this GRN. In the second test, the network consists of 50 genes and 100 interactions and the data come from the Artificial Gene Network database [25]. Since the gene network is synthetic, the corresponding matrix A in (5) is known beforehand. We solve the GRN by the NCI method and compare it with A to evaluate the performance of the algorithm. Moreover, we examine the performance of the proposed splitting algorithm in the third test.
The metric used in the performance examination was introduced in [16]. It compares the signs of the estimated matrix A_{ e } with A. The accuracy is defined as
where r_{11}, r_{22}, and r_{33} are the number of correctly identified positives, zeros and negatives, representing promotions, repressions, and no interaction, respectively.
The algorithm runs on a computer with Pentium (R) dualcore CPU E5200 2.50GHz, and RAM 2.0GB. The parameters of the algorithm are chosen as follows. In Test 1, γ in problem (8) is chosen from {0.05, 0.02, 0.008} to find possible GRNs and γ_{ τ } = 0.02. In Test 2, γ is chosen from {0.02, 0.005, 0.001} and γ_{ τ } = 0.005. In the first two tests, μ is chosen as 10γ for problem (8), λ_{1} as 0.2λ_{2} in the Block PCA model, and p_{0} as $\frac{1}{4}d$ for Eq. (9), where d is the diameter of the corresponding network. The algorithm terminates in 3 iterations.
Test 1. A small gene network with 14 genes
Figure 1 shows the network and its two communities. The diameter of this gene network is 6. We choose different initial gene expression levels randomly for 30 times. The corresponding 30 accuracy rates of the calculated GRN are shown in Figure 2(A). "NCI" and "SGN" denote the NCI algorithm and sparse gene regulatory network method [16], respectively. Compared with the SGN algorithm, the NCI significantly improved prediction accuracy. In the noise case, 10% elements of the gene expression matrix X are incorporated with Gauss noise with zero mean and unit variance. The accuracy rates of two methods are shown in Figure 2(B). In both of the noisefree (Figure 2(A)) and noise cases (Figure 2(B)), the NCI method has much better performance in most of the 30 runs. In the noisefree case, the NCI algorithm increases the average accuracy from 78.8% to 83.5%. In the noise case, the NCI algorithm increases the average accuracy from 87.3% to 88.9%.
To show the effectiveness of the NCI method at Nstep in searching multiple possible GRNs, we compare the accuracy rates with the results of one iteration at Nstep (γ = γ_{ τ } at Nstep). As shown in Figure 2(C), the average accuracy is improved from 78.5% to 83.5% in the 30 runs. In noise case (Figure 2(D)), the average accuracy is improved from 87.6% to 88.9%. Thus, a number of iterations at Nstep is necessary for finding accurate GRNs with the NCI algorithm.
Test 2. A gene network with 50 genes
The network in the second test consists of 50 genes and 100 interactions (See Figure 3(A)). Network statistics are listed in Table 1. The nodes in red in Figure 3(A)) form a unique community. The inferred network by NCI algorithm contains 41 genes and 87 interactions. As shown in Figure 3(B), the community identified by the NCI algorithm has a very large overlap with the true community. Among 34 genes in the true community, 23 important ones (with large indegree and outdegree) are successfully identified.
Test 3. The performance of the Block PCA and splitting algorithm
The following experiments are specially designed to test the efficiency of the Block PCA method and the performance of the splitting algorithm as well. We randomly generate three clusters with 30 points (See Figure 4(A)). Three clusters calculated by Kmeans are shown in Figure 4(B). Based on the distances between these points, matrix W 1 is calculated by Eq. (13) with p_{0} = 0.684. The results of the splitting algorithm are shown in Figure 4(C). The corresponding three clusters calculated by SSVD are displayed with different colors in Figure 4(D). Among 30 data points, two points (the point 25 and 30) are outliers, not included in any cluster. The clustering result of the remaining 28 points is identical with that of Kmeans.
To verify the effectiveness of the argument λ_{1}, we choose different values and the calculated low rank matrices L are shown in Figure 5. It is shown that the number of nonzero elements of L (white pixels of the images) decreases, as λ_{1} increases. The numbers of nonzero elements of L are 804, 485, 284 and 100, with λ_{1} = 0.2λ_{2}, 0.4λ_{2}, 0.6λ_{2}, and 0.7λ_{2} in Figure 5(A), (B), (C) and 5(D), respectively.
We compare the performance of the splitting algorithm with CVX and SDPNAL [26] by which the Block PCA model is solved via the SDP formulation (14). The results are listed in Table 2, where "Points30" indicates calculating on the data of 30 points on a plane, "funVal" indicates the calculated objective function value for the Block PCA model, "split", "cvx" and "sdpnal" indicate splitting method, CVX and SDPNAL, respectively. It is shown in Table 2 that splitting algorithm outperforms others in all the tests.
Conclusion
We have developed the NCI method for gene regulatory network reconstruction from gene expression data. Based on the convex programming technology, the NCI method has shown the capability to identify multiple subnetworks within a largescale gene regulatory network. The NCI method includes two main steps. At the first step, the algorithm infers a gene regulatory network. At the second step, the algorithm estimates potential community structures. These two steps repeat until the algorithm terminates. Furthermore, we have proposed an efficient Block PCA method for exploring communities within a GRN and the splitting algorithm for the Block PCA model. Numerical experiments have validated the effectiveness of the NCI method in identifying GRNs and inferring the communities.
Abbreviations
 GRN:

gene regulatory network
 NCI:

network and community identification
 Block PCA:

block principal component analysis.
References
 1.
Akutsu T, Miyano S, Kuhara S: Identification of genetic networks from a small number of gene expression patterns under the Boolean network model. Pac Symp Biocomput. 1999, 1728.
 2.
Bernard A, Hartemink A: Informative structure priors: joint learning of dynamic regulatory networks from multiple types of data. Pac Symp Biocomput. 2005, 459470.
 3.
Chen T, He H, Church G: Modeling gene expression with differential equations. Pac Symp Biocomput. 1999, 2940.
 4.
De Hoon M, Imoto S, Kobayashi K, Ogasawara N, Miyano S: Inferring gene regulatory networks from timeordered gene expression data of Bacillus subtilis using differential equations. Pac Symp Biocomput. 2003, 1728.
 5.
Hu X, Ng M, Wu F, Sokhansanj B: Mining, modeling, and evaluation of subnetworks from large biomolecular networks and its comparison study. IEEE Trans Inf Technol Biomed. 2009, 13 (2): 184194.
 6.
Huang Y, TiendaLuna I, Wang Y: A survey of statistical models for reverse engineering gene regulatory networks. IEEE Signal Process Mag. 2009, 26: 7697.
 7.
Wu F: Inference of gene regulatory networks and its validation. Current Bioinformatics. 2007, 2 (2): 139144. 10.2174/157489307780618240.
 8.
Yuan Y, Li C, Windram O: Directed partial correlation: inferring largescale gene regulatory network through induced topology disruptions. PLoS One. 2011, 6 (4): e1683510.1371/journal.pone.0016835.
 9.
Newman M: Fast algorithm for detecting community structure in networks. Phys Rev E Stat Nonlin Soft Matter Phys. 2004, 69 (6): 066133
 10.
Pothen A, Simon H, Liou K: Partitioning sparse matrices with eigenvectors of graphs. SIAM J Matrix Anal Applic. 1990, 11 (3): 430452. 10.1137/0611030.
 11.
Kernighan B, Lin S: An efficient heuristic procedure for partitioning graphs. Bell System Technical Journal. 1970, 49 (2): 291307.
 12.
Girvan M, Newman M: Community structure in social and biological networks. Proc Natl Acad Sci USA. 2002, 99 (12): 78217826. 10.1073/pnas.122653799.
 13.
Radicchi F, Castellano C, Cecconi F, Loreto V, Parisi D: Defining and identifying communities in networks. Proc Natl Acad Sci USA. 2004, 101 (9): 26582663. 10.1073/pnas.0400054101.
 14.
Palla G, Derényi I, Farkas I, Vicsek T: Uncovering the overlapping community structure of complex networks in nature and society. Nature. 2005, 435: 814818. 10.1038/nature03607.
 15.
Newman M: Detecting community structure in networks. The European Physical Journal BCondensed Matter and Complex Systems. 2004, 38 (2): 321330. 10.1140/epjb/e200400124y.
 16.
Wu F, Liu L, Xia Z: Identification of gene regulatory networks from time course gene expression data. Conf Proc IEEE Eng Med Biol Soc. 2010, 795798.
 17.
Lee M, Shen H, Huang J, Marron J: Biclustering via sparse singular value decomposition. Biometrics. 2010, 66: 10871095. 10.1111/j.15410420.2010.01392.x.
 18.
Grant M, Boyd S: CVX: Matlab software for disciplined convex programming, version 1.21 (2010).
 19.
Candés E, Li X, Ma Y, Wright J: Robust principal component analysis?. ArXiv:0912.3599.
 20.
Chandrasekaran V, Sanghavi S, Parrilo P, Willsky A: Ranksparsity incoherence for matrix decomposition. SIAM J Optim. 2011, 21 (2): 572596. 10.1137/090761793.
 21.
He B, Tao M, Yuan X: A splitting method for separate convex programming with linking linear constraints. Tech rep. 2010
 22.
Cai J, Candés E, Shen Z: A singular value thresholding algorithm for matrix completion. SIAM J Optim. 2010, 20 (4): 19561982. 10.1137/080738970.
 23.
Lin Z, Chen M, Wu L, Ma Y: The augmented lagrange multiplier method for exact recovery of corrupted lowrank matrices. ArXiv:1009.5055.
 24.
Boyd S, Parikh N, Chu E, Peleato B, Eckstein J: Distributed optimization and statistical learning via the alternating direction method of multipliers. Foundations and Trends in Machine Learning. 2010, 3: 1122. 10.1561/2200000016.
 25.
 26.
Zhao X, Sun D, Toh K: A NewtonCG augmented Lagrangian method for semidefinite programming. SIAM J Optim. 2010, 20 (4): 17371765. 10.1137/080718206.
 27.
web100023. [http://www.compsysbio.org/AGN/Web/Web100023.html]
 28.
SDPNAL. [http://www.math.nus.edu.sg/~matsundf/]
 29.
CVX. [http://cvxr.com/cvx/]
Acknowledgements
This article has been published as part of BMC Bioinformatics Volume 13 Supplement 9, 2012: Selected articles from the IEEE International Conference on Bioinformatics and Biomedicine 2011: Bioinformatics. The full contents of the supplement are available online at http://0www.biomedcentral.com.brum.beds.ac.uk/bmcbioinformatics/supplements/13/S9.
This research is partially supported by the Natural Science Foundation of China, Grant 11071029 and 11171049.
Author information
Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors' contributions
XL and ZX designed the NCI method and wrote the manuscript. XL and LZ designed the Block PCA method and splitting algorithm. XL and FW designed the ODE GRN model and experiments. All authors read and approved the final manuscript.
Rights and permissions
About this article
Cite this article
Liang, X., Xia, Z., Zhang, L. et al. Inference of gene regulatory subnetworks from time course gene expression data. BMC Bioinformatics 13, S3 (2012). https://0doiorg.brum.beds.ac.uk/10.1186/1471210513S9S3
Published:
DOI: https://0doiorg.brum.beds.ac.uk/10.1186/1471210513S9S3
Keywords
 Gene Expression Data
 Gene Regulatory Network
 Splitting Algorithm
 Nuclear Norm
 Gene Regulatory Network Inference