- Open Access
Analysis of drug resistance in HIV protease
BMC Bioinformatics volume 19, Article number: 362 (2018)
Drug resistance in HIV is the major problem limiting effective antiviral therapy. Computational techniques for predicting drug resistance profiles from genomic data can accelerate the appropriate choice of therapy. These techniques can also be used to select protease mutants for experimental studies of resistance and thereby assist in the development of next-generation therapies.
The machine learning produced highly accurate and robust classification of HIV protease resistance. Genotype data were mapped to the enzyme structure and encoded using Delaunay triangulation. Generative machine learning models trained on one inhibitor could classify resistance from other inhibitors with varying levels of accuracy. Generally, the accuracy was best when the inhibitors were chemically similar.
Restricted Boltzmann Machines are an effective machine learning tool for classification of genomic and structural data. They can also be used to compare resistance profiles of different protease inhibitors.
Human Immunodeficiency Virus (HIV) is a major pandemic disease . More than 36 million people have been infected and about half of these people receive anti-retroviral therapy . However, retroviruses like HIV mutate rapidly since the conversion from the RNA genome to DNA is error-prone . They readily form quasi-species and distinct viral strains. Therefore, retroviruses can respond effectively to selective pressures such as drug treatment by mutating to evade the antiviral drug. The development of drug resistance in HIV is an ongoing threat to effective long-term therapy.
Machine learning can predict drug resistance from sequence data with high accuracy as shown by tests on genotype-resistance data for HIV protease and reverse transcriptase [4–11]. The critical improvement in the application of machine learning to drug resistance is the inclusion of structural data in the features. We found that using Delaunay triangulation to encode the protein structure  is highly effective. The encoding compresses a protein sequence and its corresponding structure into a feature set consisting of 210 components. The set contains the relative frequencies of each kind of amino acid pair from the structure. Yu’s use of compressed encoding in  suggested that even fewer features were necessary to encapsulate drug resistance. Therefore, we used Principle Components Analysis (PCA) to explore the remaining redundancy in the data. The availability of a large amount of sequence and resistance data for HIV protease (PR) has proved valuable for method development.
The validity of this approach was verified by experimental studies [13, 14]. Machine learning was used to rigorously select representative highly resistant PR sequences for biochemical and structural characterization. The computationally selected mutant demonstrated several orders of magnitude worse affinity for inhibitors compared to wild type enzyme. The selected mutant had only one mutation in the inhibitor binding site. Therefore, a high level of resistance was achieved almost exclusively by mutations distal from the active site.
Restricted Boltzmann Machines (RBMs) are a generative machine learning algorithm [15, 16]. RBMs only require positive, or in-class, training data, and often generalize more accurately than other approaches. Training the standard algorithm on large datasets is often computationally infeasible. We have developed a highly efficient version of this algorithm [17, 18]. Using a simplified representation of the hidden and visible spins and replacing a numerical estimate of the gradient with an analytic form results in an algorithm that is at least 14 times faster than the conventional algorithm without compromising the accuracy.
Generative machine learning has not been applied to drug resistance in HIV. Therefore, application of this approach to the analysis of drug resistance is of interest. This paper shows that RBMs are as accurate as other machine learning approaches for these data. Additionally, we studied how well RBMs trained on one drug were able to predict resistance for a different drug.
Datasets and data preparation
Datasets used for the study
The genotype-phenotype datasets were downloaded from the Stanford HIV drug resistance database . Data were used for the HIV protease inhibitors: atazanavir (ATV), nelfinavir (NFV), ritonavir (RTV), indinavir (IDV), lopinavir (LPV), tipranvir (TPV), saquinavir (SQV), fos-amprenavir (FPV) and darunavir (DRV). All the datasets were pre-processed using the methods and the cutoff values described previously in . The threshold for resistance recommended by the database curators was used in this work . The results of the expansion of data for each of the HIV-1 PR inhibitors and proportion of resistant mutants are shown in Table 1.
Pre-processing/expansion of the datasets
Wild type HIV PR has a protein sequence of 99 amino acids. Sequences with insertions, deletions, or stop codons were removed. Genomic datasets often include multiple mutations at the same site. In these cases, the data were expanded to multiple sequences with single amino acids at each location to represent a single amino acid sequence for each mutant protein. For example, if one 99-amino acid mutant sequence has two different types of amino acids at one position and another site has three, this one sequence needs to be represented by six unique sequences each differing in only one amino acid substitution. The pre-processing method has been explained in detail in . Each sequence was accompanied by its inhibitor resistance fold values. The relative resistant fold values for each of the inhibitors ranged from 0 to 800-fold resistance. Finally, the expanded datasets with sequences were allotted a unique identifier number to help recover the original sequences and their respective resistance fold change after analysis.
Encoding structure and sequence with Delaunay triangulation
A graph-based encoding system was utilized to represent the sequence and structural information of the protein . The X-ray crystal structure for HIV-1 PR (3OXC)  was used as a template for creating the Delaunay triangulation. The structurally adjacent pairs of amino acids were represented as a vector of the 210 unique pairs of 20 standard amino acids. This graph-based encoding of sequence and structure has been proven to be a promising technique for fast and accurate predictions of resistance from sequence in HIV infections .
Principal component analysis
Principal Component Analysis (PCA) using Singular Value Decomposition (SVD) was run on all the HIV-1 PR datasets using the Scikit-Learn machine learning library . The datasets for each inhibitor were analyzed using the Pandas data analysis library . The resistance fold values were not included in the PCA calculations since predicting these values is the goal of this work. The results of this analysis are detailed in the “Results” section.
Training the RBM
The mutants with relative resistant fold less than 3.0 were classified as non-resistant (susceptible) and denoted as 0; while those with relative resistant fold of greater than 3.0 were classified as resistant and denoted as 1, as used in  and consistent with other analyses of the Stanford HIV resistance database . RBMs work best with bit patterns. These bit patterns were generated by scaling and dividing the range of individual features into equal intervals. Each feature of the data was scaled to the range 0 to 1 based on the maximum and minimum values of that feature. The scaled data were divided into eight intervals encoded with three bits per feature. The testing and training sets were scaled independently.
In these equations, H and V are hidden and visible (or input) layers respectively, β is the inverse temperature, U is the potential energy, and W are the weights used to define the potential.
During training, the layer that gave the best fit for each new data point was updated with a descent step and the other layers were “anti-trained” with a small ascent step. “Anti-training” improves the convergence and training efficiency of the RBM. Anti-training is only feasible when using an analytic expression for the training gradient. An RBM with 150 units in the hidden layer was trained for each category with a constant step-size of 0.1. A step-size of 0.01 was used for anti-training. An RBM was trained for both resistant and non-resistant classes. Class membership was assigned by the fractional reconstruction error, shown in Eq. 3 as defined in .
Five-fold cross validation was used to ensure that the results reflect the error in the models. The models for each fold were trained to convergence with ten iterations and the values for accuracy, positive predictive value, recall, and F from the last iteration were reported.
Classification with an RBM
The classification results are detailed in Table 2 and show a high degree of accuracy. The nearly uniform values of close to 1.0 for accuracy, PPV, recall, and F-score, show that the models reliably predict both resistant and non-resistant classes. These results compare favorably with our earlier results using non-generative machine learning algorithms [4–6, 8].
Cross-classification with an RBM
RBMs differ from non-generative machine learning methods in an interesting way. It is trivial to train an RBM against one dataset and use it to predict the behavior of another. Table 3 shows the results of a cross-training analysis of resistance data. Each row was trained on one inhibitor and the columns show the accuracy with which that model predicts the resistance for the other inhibitors. The inhibitors generally, but not completely, cross-classify with high accuracy. TPV and DRV seem to have more differences from the other inhibitors.
The ability of an RBM trained on resistance to one inhibitor to predict the behavior of resistance to another inhibitor shows that the drug resistance of HIV protease does not fully depend on the type of drug. The existence of cross-resistance is well known and our lab has used similar approaches to identify interesting multi-drug resistant mutants for structural study [6, 13, 14].
Principal component analysis
Figure 1 shows the explained variance for each of the datasets as a function of the number of reduced dimensions. As shown in the figure, there is overlap between some of the datasets (some of the plots depict the same data). This suggests that redundancy exists between datasets and not just within a single dataset. The horizontal line in the figure depicts where at least 95% of the explained variance of the datasets is captured. In most cases, the first principal component explained at least 90% of the observed variance. This was true for the ATV, LPV, NFV, and SQV inhibitors. The remaining four inhibitors had an explained variance ratio between 51% and 87% for the first principal component. For all inhibitors except for DRV, 95% of the explained variance for each dataset was captured within 60 dimensions, suggesting that the data could be further compressed while still minimizing the reconstruction error. For DRV, the explained variance could be reduced to 50 dimensions. These results indicate that a more compact encoding for the resistance data exists, consistent with Yu’s results on effectiveness of compressed encoding for machine learning .
Classification of resistant mutations of HIV PR
The combination of structure-based encoding and RBMs is an effective technique for the prediction of drug resistance in HIV PR. The five-fold cross validated results in Table 2 clearly demonstrate their success and accuracy. The high values for PPV indicate that the models could be clinically valuable. The use of an RBM is especially interesting because there are essentially no adjustable parameters in the process. Efficient training algorithms allow the RBM to handle large datasets in reasonable times. While these datasets are not quite big data, they are too big for other machine learning programs [7, 23].
Comparison with other methods
We pioneered the approach of using a unified representation of sequence with 3D structural data expressed as a 210-long feature vector for machine learning . This approach gave improved accuracy for predicting drug resistance for HIV protease and reverse transcriptase compared to using sequence data alone.
Another group reported mean R2 values of >0.95 for regression with ANN using a subset of HIVsequences restricted to subtype B with the data filtered to remove rare variants . Their classification accuracy was less impressive. Structural data can also be represented by molecular mechanics calculations on protein-drug complexes. Molecular interaction components calculated between a drug and 36 single mutants of HIV protease were used for SVM classification of resistance and showed improved accuracy over using sequence alone . These results were comparable to our earlier results, but for a much smaller number of sequences. Feature vectors derived from a four-body statistical potential and n-grams were applied in . This approach also used explicit atomic models for the protease and therefore only a few hundred mutants were included for classification and regression. Their reported accuracy was worse than ours.
Our approach preserves structural information using Delauney Triangulation derived from a single protein structure, and is applicable to any mutant, while eliminating the expensive step of calculating molecular properties for models of every mutant structure.
Redundancy in the data.
One of the original motivations for exploring graph-based encoding of protein structures was to remove unnecessary data while retaining the critical features for machine-learning based analysis of structure and function . Earlier work , which used compressed encoding, hinted that the redundancy was not completely removed from the data. Our use of PCA on the data demonstrated that further compression is possible because the majority of the variance in the data could be captured with 50–60 dimensions instead of the 210 used in the original representation. This strongly suggests that we may be able to extract patterns of mutations associated with drug resistance from the structural data itself.
Inhibitor specific patterns of drug resistance
Another important difference between generative machine learning and more conventional algorithms is that it is logically consistent to apply generative machine learning across categories. Since the RBM is essentially measuring how well it can reconstruct a given data point, it makes sense to ask whether an RBM trained on one inhibitor such as ATV could reconstruct data for a different inhibitor such as DRV. Examples of two inhibitors, Darunavir and Atazanavir are shown in Fig. 2 which demonstrates the diversity of drug chemistry used to inhibit HIV PR.
The inhibitors segregate into two main classes in the cross-training analysis. Cross-training results in high accuracy for most inhibitors, with the exception of DRV and TPV, which both incorporate sulphonamides. DRV and TPV, predict each other with reasonable accuracy (92.5%), however they show worse prediction for other inhibitors. While this could be due to chemical similarity, it could also be due to these being second generation or salvage inhibitors where the full spectrum of resistance mutations has not had time to evolve.
Accurate cross-prediction is not completely surprising. The inhibitors bind to an active site that is under selective pressure to still recognize its biological substrate. Many of the most highly resistant strains demonstrate multi-drug resistance [6, 13, 14, 24]. Therefore, we expect some level cross-prediction and this work quantifies it.
Generative machine learning algorithms such as the RBM are well-suited to the prediction of drug resistance in HIV PR, and likely will work on other systems as well. The graph-based structure/sequence encoding used in this and related work removes much of the redundancy in the data, but does not remove it all. This result suggests that even more efficient encoding schemes are possible. The RBM was used to analyze similarities in resistance profiles for different clinical inhibitors. The analysis suggests that there are at least two main classes of inhibitors for HIV PR.
Human immunodeficiency virus
- HIV PR:
Principle components analysis
Positive Predictive Value
Restricted boltzmann machine
Estimates of global, regional, and national incidence, prevalence, and mortality of hiv, 1980–2015: the global burden of disease study 2015. The Lancet HIV. 2016; 3(8):361–87. https://0-doi-org.brum.beds.ac.uk/10.1016/S2352-3018(16)30087-X.
World Health Organization HIV Page. http://www.who.int/hiv/data/en/. Accessed 6 June 2018.
Smyth RP, Davenport MP, Mak J. The origin of genetic diversity in hiv-1. Virus Res. 2012; 169(2):415–29. https://0-doi-org.brum.beds.ac.uk/10.1016/j.virusres.2012.06.015. Retroviral RNA, protein co-factors and chaperones.
Yu X, Weber I, Harrison R. Sparse representation for hiv-1 protease drug resistance prediction. In: Proceedings of the 2013 SIAM International Conference on Data Mining. SIAM: 2013. p. 342–9. https://0-doi-org.brum.beds.ac.uk/10.1137/1.9781611972832.38.
Yu X, Weber IT, Harrison R. Prediction of hiv drug resistance from genotype with encoded three-dimensional protein structure. BMC Genomics. 2014; 15(5):1.
Yu X, Weber IT, Harrison RW. Identifying representative drug resistant mutants of hiv. BMC Bioinforma. 2015; 16(17):1.
Durham EEA, Yu X, Harrison RW. FDT 2.0: Improving scalability of the fuzzy decision tree induction tool - integrating database storage. In: 2014 IEEE Symposium on Computational Intelligence in Healthcare and e-health (CICARE): 2014. p. 187–90. https://0-doi-org.brum.beds.ac.uk/10.1109/CICARE.2014.7007853.
Shen C, Yu X, Harrison R, Weber IT. Automated prediction of hiv drug resistance from genotype data. BMC Bioinforma. 2016; 17(8):278.
Tingjun H, Wei Z, Jian W, Wei W. Predicting drug resistance of the hiv-1 protease using molecular interaction energy components. Proteins Struct Funct Bioinforma. 2014; 82(6):1099.
Sheik Amamuddy O, Bishop NT, Tastan Bishop Ö. Improving fold resistance prediction of hiv-1 against protease and reverse transcriptase inhibitors using artificial neural networks. BMC Bioinforma. 2017; 18(1):369. https://0-doi-org.brum.beds.ac.uk/10.1186/s12859-017-1782-x.
Masso M, Vaisman II. Sequence and structure based models of hiv-1 protease and reverse transcriptase drug resistance. BMC Genomics. 2013; 14(4):3.
Bose P, Yu X, Harrison RW. Encoding protein structure with functions on graphs. In: 2011 IEEE International Conference on Bioinformatics and Biomedicine Workshops (BIBMW). IEEE: 2011. p. 338–44. https://0-doi-org.brum.beds.ac.uk/10.1109/BIBMW.2011.6112396.
Park JH, Sayer JM, Aniana A, Yu X, Weber IT, Harrison R, Louis JM. Binding of clinical inhibitors to a model precursor of a rationally selected multidrug resistant hiv-1 protease is significantly weaker than that to the released mature enzyme. Biochemistry. 2016; 55(16):2390–400.
Agniswamy J, Louis JM, Roche J, Harrison R, Weber IT. Structural studies of a rationally selected multi-drug resistant hiv-1 protease reveal synergistic effect of distal mutations on flap dynamics. PLoS ONE. 2016; 11(12):0168616.
Hinton G. UTML TR 2010–003 A Practical Guide to Training Restricted Boltzmann Machines. Toronto: University of Toronto; 2010. http://www.cs.toronto.edu/~hinton/absps/guideTR.pdf. Accessed 2017.
Salakhutdinov R, Mnih A, Hinton G. Restricted boltzmann machines for collaborative filtering. In: Proceedings of the 24th International Conference on Machine Learning. ICML ’07. New York: ACM: 2007. p. 791–8. https://0-doi-org.brum.beds.ac.uk/10.1145/1273496.1273596.
Harrison RW, Freas C. Fuzzy restricted boltzmann machines In: Melin P, Castillo O, Kacprzyk J, Reformat M, Melek W, editors. Fuzzy Logic in Intelligent System Design. Cham: Springer International Publishing: 2018. p. 392–8.
Harrison R, McDermott M, Umoja C. Recognizing protein secondary structures with neural networks. In: 2017 28th International Workshop on Database and Expert Systems Applications (DEXA). DEXA: 2017. p. 62–8. https://doi.org/10.1109/DEXA.2017.29.
Rhee S-Y, Gonzales MJ, Kantor R, Betts BJ, Ravela J, Shafer RW. Human immunodeficiency virus reverse transcriptase and protease sequence database. Nucleic Acids Res. 2003; 31(1):298–303.
Berman HM, Westbrook J, Feng Z, Gilliland G, Bhat TN, Weissig H, Shindyalov IN, Bourne PE. The protein data bank. Nucleic Acids Res. 2000; 28(1):235–42. https://0-doi-org.brum.beds.ac.uk/10.1093/nar/28.1.235.
Pedregosa F, Varoquaux G, Gramfort A, Michel V, Thirion B, Grisel O, Blondel M, Prettenhofer P, Weiss R, Dubourg V, et al. Scikit-learn: Machine learning in python. J Mach Learn Res. 2011; 12(Oct):2825–30.
McKinney W. pandas: a foundational python library for data analysis and statistics. In: Python for High Performance and Scientific Computing. Sebastopol: O’Reilly Media: 2011. p. 1–9.
Abu-halaweh NM, Harrison RW. Practical fuzzy decision trees. In: 2009 IEEE Symposium on Computational Intelligence and Data Mining: 2009. p. 211–6. https://0-doi-org.brum.beds.ac.uk/10.1109/CIDM.2009.4938651.
Wensing AMJ, van Maarseveen NM, Nijhuis M. Fifteen years of hiv protease inhibitors: raising the barrier to resistance. Antivir Res. 2010; 85(1):59–74. https://0-doi-org.brum.beds.ac.uk/10.1016/j.antiviral.2009.10.003. Twenty-five Years of Antiretroviral Drug Development: Progress and Prospects.
The research was supported in part by the National Institutes of Health grant GM062920 (ITW & RWH).
Publication was sponsored by Georgia State University.
Availability of data and materials
The unprocessed datasets can be downloaded from: http://hivdb.stanford.edu/pages/genopheno.dataset.html
About this supplement
This article has been published as part of BMC Bioinformatics Volume 19 Supplement 11, 2018: Proceedings from the 6th Workshop on Computational Advances in Molecular Epidemiology (CAME 2017). The full contents of the supplement are available online at https://0-bmcbioinformatics-biomedcentral-com.brum.beds.ac.uk/articles/supplements/volume-19-supplement-11.
Ethics approval and consent to participate
Consent for publication
The authors declare that they have no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Pawar, S., Freas, C., Weber, I. et al. Analysis of drug resistance in HIV protease. BMC Bioinformatics 19, 362 (2018). https://0-doi-org.brum.beds.ac.uk/10.1186/s12859-018-2331-y
- HIV protease
- Drug resistance
- Machine learning