 Software
 Open Access
 Published:
DBNorm: normalizing highdensity oligonucleotide microarray data based on distributions
BMC Bioinformatics volume 18, Article number: 527 (2017)
Abstract
Background
Data from patients with rare diseases is often produced using different platforms and probe sets because patients are widely distributed in space and time. Aggregating such data requires a method of normalization that makes patient records comparable.
Results
This paper proposed DBNorm, implemented as an R package, is an algorithm that normalizes arbitrarily distributed data to a common, comparable form. Specifically, DBNorm merges data distributions by fitting functions to each of them, and using the probability of each element drawn from the fitted distribution to merge it into a global distribution. DBNorm contains stateoftheart fitting functions including Polynomial, Fourier and Gaussian distributions, and also allows users to define their own fitting functions if required.
Conclusions
The performance of DBNorm is compared with zscore, average difference, quantile normalization and ComBat on a set of datasets, including several that are publically available. The performance of these normalization methods are compared using statistics, visualization, and classification when class labels are known based on a number of selfgenerated and public microarray datasets. The experimental results show that DBNorm achieves better normalization results than conventional methods. Finally, the approach has the potential to be applicable outside bioinformatics analysis.
Background
Personalised or precision medicine aims to find specific therapeutics bestsuited for individuals based on their genomic data [10]. It is considered a promising approach for diseases with a genetic component such as cancer. A common approach for quantifiably capturing genomic information is via oligonucleotide microarray technology where gene expression is measured by the signal intensities of probe pairs [12]. Affymetrix GeneChip^{Footnote 1} microarrays are the most popular and are applied in thousands of bioinformatics studies worldwide.
Although nextgeneration sequencing and RNA sequencing are increasingly popular, oligonucleotide microarray technology is still in use, and a great deal of microarray data is available. However, it is difficult to compare the results derived from different cohorts (for longitudinal studies) [8], or from multiple sources because of variations in the microarray platforms used or differences in sample preparation or operator sophistication. Because of advances in microarray technology, Affymetrix microarray technologies and probe sets are regularly updated, and it is implausibly expensive to regenerate data after each update. This is especially the case in domains such as rare cancers where data from samples collected infrequently over a long period must be combined to produce enough patient data for comparative analysis.
Normalization is essential in microarray data analysis to enable accurate comparison of expression levels between and within samples [5]. A number of normalization methods have been proposed such as Average Difference (AvgDiff) [c], Total Count (TC) [2], and Trimmed Mean of M values (TMM) [15]. These methods normalize microarray data by aligning the mean and/or variance and work well when the data has the same distribution, but with linear differences in parameters. Splinebased methods [23] were proposed to normalize data by doing regression on local features. However, these methods fail when the distributions themselves differ, which is likely to be the case in practice. Aligning distributions of different shapes is done by defining features of the distributions and then minimizing the differences in these features, for example, using smooth nonlinear curves and quantile normalization [17]. Schmid et al. [18] comprehensively compared normalization methods on microarray data.
The performance of such methods depends on good choices of distribution features. They are often inefficient since multiple features must be aligned simultaneously. Most popular software packages for gene expression data analysis and research such as IRON [21], MAAMD [6], AGA [4] and BatchQC [13], use these standard normalization methods. Another widely used normalization software is ComBat [11] which is proposed to standardize mean and variance of microarray data by empirical Bayes. A drawback of this method is that it is hard to control the distribution of data after normalization. A recent survey of Affymetrix microarray data normalization software can be found in [20]. Our approach dealing with distributions opens the way to normalising data generated from different platforms or chipsets.
We propose an efficient, distributionbased normalization method, DBNorm that works on microarray data from multiple sources regardless of the distributions of the data in each. Because it scales data from different sources into the same distribution they will necessarily also have similar mean, variance and distribution features such as quantiles. We first compare the performance of DBNorm with four stateoftheart methods: zscore, average difference (AvgDiff) [19], quantile normalization and ComBat on gene expression data derived from diagnostic bone marrow from pediatric Acute Lymphoblastic Leukaemia (ALL) patients on different Affymetrix platforms. As well as the standard approach of statistical evaluation of normalization methods [5, 14], this study also evaluates the performance of normalization methods in the context of downstream utilization of the data for visualization and classification. The performance of DBNorm is also evaluated on a set of benchmark datasets, including a dilution/mixture dataset, a spikein dataset, and a public acute lymphoblastic leukaemia dataset.
Implementation
This section describes the main principle of DBNorm, followed by the workflow used to normalize two microarray data samples.
Distributionbased normalization
Distributionbased normalization transforms values from one scale to another and keeps the order of the magnitudes of the original values unchanged. The probeset and sample value in the dataset that was the minimum before normalisation will remain the minimum after DBNorm. However, the value itself will be different. Similarly, the probeset sample value that was the maximum before normalisation will be the one that is the maximum after DBNorm, albeit taking a different value. In summary, the order of probeset sample values remains the same before and after normalisation. However, the values may differ. Our distributionbased normalization (DBNorm) method is based on this natural principle and is achieved by mapping the probabilities of values in one distribution to another. The fitting functions supported in the DBNorm package are polynomial, Fourier and Gaussian fitting. It also supports fitting distributions using userdefined functions.
The target, desired, distribution might be known in particular contexts, but it is more typical to choose the dataset with the largest number of rows as the best target, transforming the other, smaller datasets to match. DBNorm fits functions to the values of each probeset by regarding them as probability density functions. The values in each column are then scaled to the desired distribution, also regarded as a probability distribution. Consider two columns of microarrays M _{ 1 } and M _{ 2 } representing intensities of the same probesets, but with different distributions. Suppose that their fitted probability density functions are f(∙) and g(∙) respectively. Given an element m _{ 1 } ∈ M _{ 1 }, the probability of m _{ 1 } is \( {P}_{M_1}\left({m}_1\right) \).
We want an element m’ _{ 1 } in M _{ 2 } such that the probability of m _{ 1 } in M _{ 1 } is equal to the probability of m’ _{ 1 } in M_{2}. This can be expressed in the following equation:
The microarray column of M _{ 1 } can be scaled to the same distribution as column M _{ 2 } via Eq. (2). This transformation necessarily preserves the order of values in each column.
Workflow of DBNorm
The DBNorm package was coded to normalize target microarray data by rescaling the column distributions to match a chosen distribution. This process is displayed by an example in Fig. 1.
Suppose that there are two microarray data sources: source 1 (DS1) and source 2 (DS2). Merged together without normalization, they tend to form two clusters with each cluster from one data source. This can be seen in Fig. 1 where high dimensional merged probeset dataset is compressed into two dimensions by Principal Component Analysis (PCA) for visualization.
DBNorm generates distribution information (visible in a histogram). In this example, the distributions DS1 and DS2 are fitted by polynomial functions denoted by f(t) and g(t). The element m _{ 1 } is mapped to m’ _{ 1 } via Eq. (2). The normalized DS1 shows a very similar distribution to DS2. As a result, when we merge normalized DS1 with DS2, the result of a PCA shows that data samples from these two sources mix well, no longer separating based on source.
DBNorm can also rescale microarray data to a standard distribution by choosing g(t) to be a standard probability density function, e.g. a normal distribution. Code for this example, and an example of normalizing a data source to a standard distribution are included in the user manual of the DBNorm package.
Datasets
This section describes the datasets used for evaluating the proposed normalization (DBNorm) method.
The acute lymphoblastic leukaemia (ALL) dataset in this study was collected using Affymetrix microarray data of the diagnostic bone marrow of 146 childhood ALL patients collected by The Children’s Hospital at Westmead, Sydney, Australia^{Footnote 2} over ten years. As a result, samples were run on several generations of platforms.
Table 1 gives dataset details. In particular, the number of patients whose samples were run on each platform is small. To evaluate the performance of normalization methods based on classification accuracy, we consider relapse as a class label.
We also use a set of public domain datasets whose details are listed in Table 2. The dilution/mixture dataset is from 75 Affymetrix HGU95A (version 2) arrays from one source of RNA derived from liver with one microarray (source A) having half the amount of RNA than source B. These two sources are hybridized to human array (HGU95A) covering 12,625 genes with 201,800 Affymetrix microarray probes [7]. Specifically, there are three scanners and each one array replicate was processed in different scanner. The data can be found in Bioconductor.^{Footnote 3}
The spikein dataset [9] is generated on Affymetrix platforms HGU133 and HGU95. The platform HGU133 data contains 42 samples with 22,300 genes and 248,152 Affymetrix microarray probes, while the platform HGU95 data contains 59 samples with 12,626 genes and 201,807 Affymetrix microarray probes. Each RNA source has been contaminated with additional RNA resulting in a highly disproportionately mixed set of genes which light up in nonuniform distributions. This dataset can be found on Bioconductor.^{Footnote 4}
The public acute lymphoblastic leukemia (ALL) dataset contains 20 samples of the MLL subtype across two Affymetrix microarray platforms: HGU133A and HGU133B. The dataset is published in [16] and can be accessed via Bioconductor^{Footnote 5} as well. To construct an artificially uniform but widely dispersed dataset to test the normalization, we compared 22,283 random and nonmatching probesets between the two platforms.
Results and discussion
Applying DBNorm to the Westmead ALL dataset
As different platforms have different probesets (Table 1), only the common probes from different platforms can be used to merge data from them. For Affymetrix microarray data, there are 11,288 common probes for the platforms U133A, U133A2, U133Plus2 and HG1ST.
Table 3 gives the statistics of the common probesets for each platform. It shows that statistics differ across platforms as expected. Platforms U133A2 and U133Plus2 are more similar to one another than U133A, and platform HG1ST is quite different from all three. This is also confirmed in Fig. 2 where the distribution of all samples from U133A2 (Fig. 2(b)) is similar to the distribution of all samples from U133Plus2 (Fig. 2(c)) and the distribution of all samples from HG1ST (Fig. 2(d)) is quite different from the others. Normalization is essential for downstream analysis.
We choose platform U133Plus2 as the target and transform the other datasets to match (Fig. 2(g)). This shows the ability of DBNorm to match an arbitrary distribution. We assume a polynomial probability density function for all platforms. Figure 2(e), (f) and (h) show the distributions of the datasets from platforms U133A, U133A2 and HG1ST respectively after normalization. It is clear that these three datasets now have a similar distribution to the dataset from platform U133Plus2.
We use the Kullback–Leibler Divergence to calculate the distribution similarities for each platform before and after normalization; the results are given in Table 4. Before normalization, the distributions are different. The biggest difference is between platforms HG1ST and U133Plus2, 0.2300, followed by the difference (0.1475) between platforms U133A and U133Plus2, and the difference (0.1177) between platforms U133A2 and U133Plus2.
We further compare these standard normalization techniques: zscore, Average Difference (AvgDiff), ComBat and Quantile normalization with DBNorm. First, we compare the statistical properties of the distributions produced by these techniques (Table 5). All normalize data into similar ranges, but there are nontrivial differences in the resulting distributions.
Visualization provides another way to assess the quality of normalizations. We compare the results of zscore normalization, AffyDiff, Quantile, ComBat and DBNorm, and visualize them using principal component analysis (PCA) [1] in two dimensions. In Fig. 3, patients whose data was generated from different platforms are marked in different colours. Green dots are patient’s data from HG1ST; blue dots from U133A; red dots from U133A2; and black dots from U133Plus2.
The result of applying zscore normalization only is illustrated in Fig. 3(a) where the integrated data shows marked platform artifacts. In the diagram, there are three major clusters. The cluster at the topleft corner is patient data from HG1ST, and is far from the other two clusters; the distribution of HG1ST is quite different from the other three platforms. The cluster at the bottom represents the patient data from U133A, and the remaining cluster is for patient data from U133A2 and U133Plus2. Although patients from these two platforms are close enough to form one cluster, they are not well mixed. Fig. 3(b) and (c) illustrate the result for AvgDiff and quantile normalization respectively. They disperse the data regardless of the platform to some extent but not much. Figures 3(d) and (e) are the results of ComBat and DBNorm. Both of them can mix patients from different platforms together and DBNorm can compress patents in a smaller area because after normalization DBNorm can achieve a narrow value range (Table 5). Meanwhile, DBNorm provides an explicit way to control which distribution the input data is scaled into while ComBat does not.
Classification can further evaluate the quality of normalizations. Specifically, if data samples from different platforms are not well mixed, classifiers must differentiate the important variation between records of different classes from the irrelevant variation between records in different (platformbased) clusters. We compare prediction accuracy before and after normalization for the Westmead dataset, which is the only dataset for which we have a class label, relapse. We use a soft margin Support Vector Machine (SVM) [3] with a Gaussian kernel as the classification technique to classify the normalized dataset based on relapse. To avoid the influence of randomness, we applied Leaveoneoutcrossvalidation [22] to evaluate the average performance of the built classifier by running 146 times as there are 146 patients. The reason for choosing LOOCV instead of the commonly used Kfold cross validation is that the dataset is somewhat imbalanced, with 33 relapsing patients and 113 patients who did not relapse and LOOCV can make full use of the whole dataset. Also, because of the imbalance issue, the performance of the classifier is evaluated by accuracy, Fmeasure, ROC AUC (Table 6) and pvalue with confidence interval as 0.95 (Table 7). Table 6 shows the accuracy, Fmeasure and AUC averaged over the training set and test set sections of LOOCV respectively for each of the methods. The AUC value for the test portion for a method, for example, is the average of the AUC value for each patient (i.e. each left out point). Table 7 shows the pvalue derived from a paired ttest comparing the mean of the sample of AUC values over patients for the test portion for each method compared with DBNorm. It demonstrates that classification after using DBNorm is statistically significantly better than the other methods.
Table 6 shows that the performance of the classifiers on test dataset differ. DBNorm normalization achieves the highest accuracy (0.84) and Fmeasure (0.73) followed by ComBat, Quantile normalization, with AvgDiff and zscore perform poorly. The classification result on unnormalized data is worst which shows that normalization is of great necessity in data preprocessing.
Applying DBNorm on public domain datasets
We now compare the performance of the normalization methods on several publicdomain datasets. The performance of these normalized methods is evaluated from statistical level including distributions and MA plot due to lack of class labels. MA plot visualizes the differences between measures taken into two selected samples by transforming the data onto M (log ratio) and A (mean average) scales which is considered as a major way to compare the difference of two geneexpression sources.
Dilution/mixture dataset
For this experiment, we generate a dataset from both source A and source B. Specifically, we choose 201,800 Affymetrix microarray features. The results of normalization are illustrated in Fig. 4.
The dilution effect is clear in Fig. 4(c) where the overall ratio M is at 0.5. The red line is the row median of the standard Dilution/mixture dataset, while the blue line is a base. The effect of good normalization will bring the red line close to the blue line where M = 0. Furthermore, Figs. 4(a) and (b) show that the data from the two sources have different ranges and that their distributions have a slight difference.
Zscore normalization narrows the gap between the red and blue lines as illustrated in Fig. 4(f). However, the samples are widely spread at both sides. From Fig. 4(d) and (e), zscore normalization maps the data into the same range and keeps the distributions unchanged. This is the main reason why data samples are widely spread along the row median.
AvgDiff works better than zscore. From MA plot (Fig. 4(i)), we can see that AvgDiff minimizes red and blue lines in the initial part but the gap between them increases sharply. Fig. 4(g) and (h) are the distributions after AvgDiff normalization; the data are more evenly distributed compared with Figs. 4(a) and (b). This is why samples stay close in the MA plot. However, the distributions after AvgDiff normalization are still different, resulting in the gap between red and blue lines increasing.
Intuitively, both Quantile and DBNorm normalization can minimize the gap between the red and blue lines (Figs. 4(l) and (o)) in the MA plot. DBNorm works better than Quantile normalization. First, DBNorm achieves better values in Median and Interquartile Range (IQR), 0 and 0.138 respectively. Secondly, DBNorm compress Affymetrix microarray features into a smaller range, from −2.216 to 1.275.
The distributions of normalized data from DBNorm are more similar than those from Quantile normalization. The KL divergence of the distributions normalized by DBNorm is 2.283 × 10^{−6}, while the divergence of the distributions normalized by Quantile normalization is 5.788 × 10^{−5}.
Spikein dataset
We further compare the performance of normalization on a dataset with 5184 common Affymetrix microarray features from platforms HGU133 and HGU95 to determine the ability of DBNorm on an atypical dataset that represents an extreme example of data distributions. The results of normalization are illustrated in Fig. 5.
From Fig. 5(c), we can see that the microarray data from these two selected experiments with the Spikein dataset show clear artefacts from the spiked in genes, despite the data being generally well normalised based on the fact that the data sits along the blue axis. Also, Figs. 5(a) and (b) show that the data from these two experiments have different ranges and distributions.
During normalization by Zscore, AvgDiff and Quantile, the spiked in gene populations are resistant to their normalization effect as shown in Figs. 5(f), (i) and (l). DBNorm has the strongest effect among the four normalization methods, showing a powerful influence on disproportionate and extremely skewed data. In this extreme case, the power of the normalisation is evident. The spiked in peak is still seen in Fig. 5(n) despite a balancing of the overall distribution (see Fig. 5(m)) and the high level of compression observed in the MA plot (Fig. 5(o)). This level of change is not seen in the other examples. The normalized data sources show very similar distributions (Fig. 5(m) and (n)) leading to a good result in the MA plot in Fig. 5(o). The red and blue lines are very close. DBNorm compresses data into a very narrow range so that dots are overlapped dramatically.
Acute lymphoblastic leukemia (ALL) dataset
Finally, we compare the performance of normalization on a public MLL dataset generated from Affymetrix platforms HGU133A and HGU133B. The results of normalization are illustrated in Fig. 6. With this artificially configured data we expect a widely dispersed distribution of M values, which is what we see in Fig. 6(c). It also shows a shifting M ratio relative to spot intensity. We expect good normalization to remove this skew whilst maintaining the overall widely dispersed distribution. Zscore (Fig. 6(f)) and AvgDiff (Fig. 6(i)) normalization failed to do this. Quantile normalization and DBNorm (Figs. 6(l) and (o)) achieve better results because they focus on distributions. Quantile normalized data shows similar distributions in Fig. 6(j) and (k) but a wider dispersion in ratio. DBNorm is closer to the original with regards to the range dispersal (Fig. 6(m) and (n)).
Conclusion
Microarray data from heterogeneous sources is common, but has been underexploited because of the difficulty of matching data from different platforms at different times. Normalization is the key to data integration and enables consistent downstream analysis. DBNorm outperforms the other three methods investigated, based on statistical properties, KL divergence, and classification.
Notes
Abbreviations
 ALL:

Acute Lymphoblastic Leukaemia
 AvgDiff:

Average Difference
 DBNorm:

Distributionbased Normalization
 DS1:

Data source 1
 DS2:

Data source 2
 KL divergence:

Kullback–Leibler divergence
 LOOCV:

Leaveoneoutcrossvalidation
 PCA:

Principal Component Analysis
 SVM:

Support Vector Machine
 TC:

Total Count
 TMM:

Trimmed Mean of M values
References
 1.
Abdi H, Williams LJ. Principal component analysis. Wiley Interdiscip Rev Comput Stat. 2010;2(4):433–59.
 2.
Bullard JH, Purdom E, Hansen KD, Dudoit S. Evaluation of statistical methods for normalization and differential expression in mRNASeq experiments. BMC Bioinforma. 2010;11(1):94.
 3.
Chang CC, Lin CJ. LIBSVM: a library for support vector machines. ACM Trans Intell Syst Technol. 2011;3(2):27.
 4.
Considine M, Parker H, Wei Y, Xia X, Cope L, Ochs M, Fertig E. AGA: interactive pipeline for reproducible gene expression and DNA methylation data analyses. F1000Res. 2015;4:1.
 5.
Dillies MA, Rau A, Aubert J, HennequetAntier C, Jeanmougin M, Servant NK, et al. A comprehensive evaluation of normalization methods for Illumina highthroughput RNA sequencing data analysis. Brief Bioinform. 2013;14(6):671–83.
 6.
Gan Z, Wang J, Salomonis N, Stowe JC, Haddad GG, McCulloch AD, et al. MAAMD: a workflow to standardize metaanalyses and comparison of affymetrix microarray data. BMC Bioinform. 2014;15(1):1.
 7.
Gautier L, Cope L, Bolstad BM, Irizarry RA. Affyanalysis of Affymetrix GeneChip data at the probe level. Bioinformatics. 2004;20(3):307–15.
 8.
Hansen KD, Irizarry RA, Zhijin W. Removing technical variability in RNAseq data using conditional quantile normalization. Biostatistics. 2012;13(2):204–16.
 9.
Irizarry RA, Bolstad BM, Collin F, Cope LM, Hobbs B, Speed TP. Summaries of Affymetrix GeneChip probe level data. Nucleic Acids Res. 2003;31:e15.
 10.
Jain KK. Personalised medicine for cancer: from drug development into clinical practice. Expert Opin Pharmacother. 2005;6(9):1463–76.
 11.
Johnson WE, Li C, Rabinovic A. Adjusting batch effects in microarray expression data using empirical Bayes methods. Biostatistics. 2007;8(1):118–27.
 12.
Lukk M, Kapushesky M, Nikkila J, Parkinson H, Goncalves A, Huber W, et al. A global map of human gene expression. Nat Biotechnol. 2010;28(4):322–4.
 13.
Manimaran S, Selby H M, Okrah K, et al. BatchQC: interactive software for evaluatingsample and batch effects in genomic data[J]. Bioinformatics. 2016;32(24):38368.
 14.
Park T, Yi SG, Kang SH, Lee S, Lee YS, Simon R. Evaluation of normalization methods for microarray data. BMC Bioinforma. 2003;4(1):1.
 15.
Robinson MD, Oshlack A. A scaling normalization method for differential expression analysis of RNAseq data. Genome Biol. 2010;11(3):R25.
 16.
Ross ME, Zhou X, Song G, Shurtleff SA, Girtman K, Williams WK, et al. Classification of pediatric acute lymphoblastic leukemia by gene expression profiling. Blood. 2003;102(8):2951–9.
 17.
Sasik R, Calvo E, Corbeil J. Statistical analysis of highdensity oligonucleotide arrays: a multiplicative noise model. Bioinformatics. 2002;18(12):1633–40.
 18.
Schmid R, Baum P, Ittrich C, FundelClemens K, Huber W, Brors B, et al. Comparison of normalization methods for Illumina BeadChip HumanHT12 v3. BMC Genomics. 2010;11(1):349.
 19.
Su AI, Cooke MP, Ching KA, et al. Largescale analysis of the human and mouse transcriptomes[J]. Proc Natl Acad Sci. 2002;99(7):446570.
 20.
Walsh CJ, Hu P, Batt J, Santos CC. Microarray metaanalysis and crossplatform normalization: integrative genomics for robust biomarker discovery. Microarrays. 2015;4(3):389–406.
 21.
Welsh EA, Eschrich SA, Berglund AE, Fenstermacher DA. Iterative rankorder normalization of gene expression microarray data. BMC Bioinforma. 2013;14(1):1.
 22.
Wong TT. Performance evaluation of classification algorithms by kfold and leaveoneout cross validation. Pattern Recogn. 2015;48(9):2839–46.
 23.
Workman C, Jensen LJ, Jarmer H, Berka R, Gautier L, Nielser HB, et al. A new nonlinear normalization method for reducing variability in DNA microarray experiments. Genome Biol. 2002;3(9):48.
Acknowledgements
The authors acknowledge Centre for Artificial Intelligence Centre at the University of Technology Sydney for providing high performance computing resources that have contributed to the research results reported within this paper.
Funding
This work was supported by a Big Data Big Impact Award from the Cancer Institute of New South Wales and donated funds from the Braver Stronger Smarter Foundation.
Availability of data and materials
Project name: DBNorm.
Package access: https://github.com/mengqinxue/dbnorm
Operating systems: Windows, Mac OS and Linux.
Programming language: R.
License: DBNorm is freely available
Author information
Affiliations
Contributions
QM programmed and tested DBNorm on both selfgenerated and public affymetrix data, and PK and QM drafted the manuscript. DC helped with finalising pipelines of the data analysis and designing experiments. DS reviewed and analysed the experimental results. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
The selfgenerated Acute Lymphoblastic Leukaemia dataset is generated by The Children’s Hospital at Westmead, Sydney, Australia and has been reviewed/approved by its ethics committee (The Human Research Ethics Committee of The Sydney Children’s Hospital Network), while public domain datasets are also approved for dissemination.
Consent for publication
Not applicable.
Competing interests
The authors declare that they have no competing interests.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Additional files
Additional file 1:
DBNorm user manual. A formal R package user manual which describes all functions contained in DBNorm package and examples. (PDF 104 kb)
Additional file 2:
DBNorm testing document. Results of how we test DBNorm package with builtin datasets. (DOCX 575 kb)
Additional file 3:
DBNorm test script. Code of how we test DBNorm package. (TXT 2 kb)
Additional file 4:
DBNorm installation. Describes how to install DBNorm via devtools in R. (TXT 4 kb)
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Meng, Q., Catchpoole, D., Skillicorn, D. et al. DBNorm: normalizing highdensity oligonucleotide microarray data based on distributions. BMC Bioinformatics 18, 527 (2017). https://0doiorg.brum.beds.ac.uk/10.1186/s1285901719125
Received:
Accepted:
Published:
DOI: https://0doiorg.brum.beds.ac.uk/10.1186/s1285901719125
Keywords
 Normalization
 Distribution
 Gene expression data
 R