 Research article
 Open Access
 Published:
Bayesian refinement of protein functional site matching
BMC Bioinformatics volume 8, Article number: 257 (2007)
Abstract
Background
Matching functional sites is a key problem for the understanding of protein function and evolution. The commonly used graph theoretic approach, and other related approaches, require adjustment of a matching distance threshold a priori according to the noise in atomic positions. This is difficult to predetermine when matching sites related by varying evolutionary distances and crystallographic precision. Furthermore, sometimes the graph method is unable to identify alternative but important solutions in the neighbourhood of the distance based solution because of strict distance constraints. We consider the Bayesian approach to improve graph based solutions. In principle this approach applies to other methods with strict distance matching constraints. The Bayesian method can flexibly incorporate all types of prior information on specific binding sites (e.g. amino acid types) in contrast to combinatorial formulations.
Results
We present a new metaalgorithm for matching protein functional sites (active sites and ligand binding sites) based on an initial graph matching followed by refinement using a Markov chain Monte Carlo (MCMC) procedure. This procedure is an innovative extension to our recent work. The method accounts for the 3dimensional structure of the site as well as the physicochemical properties of the constituent amino acids. The MCMC procedure can lead to a significant increase in the number of significant matches compared to the graph method as measured independently by rigorously derived pvalues.
Conclusion
MCMC refinement step is able to significantly improve graph based matches. We apply the method to matching NAD(P)(H) binding sites within single Rossmann fold families, between different families in the same superfamily, and in different folds. Within families sites are often well conserved, but there are examples where significant shape based matches do not retain similar amino acid chemistry, indicating that even within families the same ligand may be bound using substantially different physicochemistry. We also show that the procedure finds significant matches between binding sites for the same cofactor in different families and different folds.
Background
Recent advances in highthroughput structural determination techniques and structural genomics initiatives have produced an increase in volume of structural data for proteins prior to knowledge of their functions. With these advances has come the need to rapidly predict functions for proteins based on their structures.
Comparison of the overall folds of proteins by programs such as CE [1] or DALI [2] can be complemented by focusing on local structural comparisons centred on sites of functional importance such as ligand binding sites or catalytic sites [3–10]. These methods have largely arisen in response to the discovery of proteins sharing similar functions without similarity in their overall folds [11, 12] or proteins adopting the same superfold [13] without functional similarity. Local structural comparison methods are based on the idea that geometrically similar sites are likely to have similar functions since their amino acids are conserved in precise orientations in order to perform their chemistry or their similar shapes and physicochemical properties may be selective for similar small molecules such as substrates, inhibitors or cofactors. Hence, finding structural similarity to functional sites of known and characterised proteins may facilitate function prediction for newly determined protein structures even in the absence of overall fold or sequence similarity.
Functional site comparison methods essentially fall into one of two categories. The first category provides known templates of specific motifs of conserved amino acids or atoms often involved in enzyme catalysis [3, 7, 10]. These are knowledgebased methods which aim to discover new proteins with the same catalytic function. The second category consists of similarity searching algorithms [4, 5, 8, 9, 14] where prior knowledge of motifs is not required and site similarity is assessed by how closely the sites align and/or the proportion of overlap. Partial similarity between sites can be detected and hence much larger sites such as ligand binding sites can be compared. Methods addressing this problem generally represent functional sites or functional site surfaces as mathematical graphs for graphtheoretic or geometric hashing comparisons where graph vertex positions are placed using a variety of methods. CavBase [14], SiteEngine [8] and PINTS [9] for example use positions of pseudocentres whereas eFsite [5] uses electrostatic potentials and surface curvature. SitesBase [15] and pvSoar [4] use αshapes and an allatom model respectively. Recently, a statistical approach using Bayesian modelling was proposed [16].
The Bayesian method gives a complete distribution of probable matches and hence an opportunity to explore several other solutions near the "optimal" solution. In addition, this approach automatically adapts to the level of noise in functional site atomic positions. The Bayesian method can also flexibly incorporate concomitant information like amino acid types and their different physicochemistry classifications in matching biding sites. In principle, the Bayesian method could also incorporate all types of prior information on specific binding sites, which is nearly impossible with simple combinatorial approaches like graph matching.
In [16] each "site" consists of a single location, such as a C_{ α }atom in an amino acid. But for each C_{ α }atom there is also a neighbouring C_{ β }atom which can be paired to it. Thus the matching criterion need to be extended to require a close match not only for C_{ α }atoms in different configurations but also for the edges connecting C_{ α }atoms to their C_{ β }atoms.
In this paper, two substantial advances over [16] are matching of pairs of atoms (C_{ α }and C_{ β }) by a Bayesian method and refining the graph method in matching functional sites. We propose Bayesian modelling of graph matches using C_{ α }and C_{ β }atoms. This is done by adding a Markov chain Monte Carlo (MCMC) refinement step to the graph matching method [17].
Actually MCMC refinement procedure can be used to refine a match generated by any method. However for illustration purposes, here the graph theoretic method is chosen because it is a well tested method in a variety of geometrical matching problems for protein structure, see for example [3, 7, 14, 18, 19].
The SITESDB database
Throughout this work we compared the local structural and physicochemical environment of protein functional sites taken from a database of known sites (SITESDB) [17]. SITESDB entries were automatically formed from the PDB [20] by locating the local protein environment (amino acids within 5Å) around bound ligands (identified by PDB HETATM records) and author annotated active sites (identified by PDB SITE records). A protein may contain multiple functional sites so unique identifiers for SITESDB entries were generated from the four letter PDB identifier with an extra integer to distinguish sites from the same protein. For example, the identifiers 1hdx_0 and 1hdx_1 are separate sites from the protein with PDB identifier 1hdx.
The automatic extraction of sites results in multiple and incomplete representations of functional sites containing more than one bound ligand, or sites that are both annotated with SITE records and contain bound ligands. In these cases a better biochemical description of the site was obtained by merging component sites without duplication of their amino acid contents. Sites were merged if ligand atoms occurred within 5Å of atoms in a second ligand. In the absence of bound ligands, sites were merged if they were found to contain common amino acid residues.
Representation and matching
We denote two functional sites to be matched by X and Y . Let the number of amino acids be m and n for X and Y respectively and we shall simply use X_{ j }, j = 1, 2, ..., m and Y_{ k }, k = 1, 2, ..., n to refer to the jth and kth amino acids in functional sites X and Y. Thus X_{ j }and Y_{ k }are simply the labels for amino acid with no coordinate system. Further, let x_{1j}and y_{1k}denote coordinates for C_{ α }atoms for the jth and kth amino acids in the two functional sites X and Y, respectively. We denote C_{ β }coordinates for the jth and kth amino acids in the two functional sites by x_{2j}and y_{2k}. Further, let x_{1} = {x_{1j}: j = 1 ..., m}, x_{2} = {x_{2j}: j = 1 ..., m} and y_{1} = {y_{1k}: k = 1 ..., n}, y_{2} = {y_{2k}: k = 1 ..., n}.
We consider matching at the level of amino acid residues. A match between two sites is a mapping between subsets of the residues in each site such that matched residues can be superimposed in threedimensional space. Thus the problem is finding correspondence between amino acids of the two functional sites and the geometrical transformation to bring the corresponding atoms into registration. Knowing correspondence, solving for transformation is trivial and vice versa, but both are not known before hand.
We denote the matching between amino acids in X and Y using a matrix M:
We denote the transformation to bring the configurations into alignment to be x_{ ij }= Ay_{ ik }+ τ for M_{ jk }= 1, i = 1, 2 where A is a rotation matrix and τ is a translation vector.
Our matching considers C_{ α }and C_{ β }atoms of each residue (except glycine where only the former is used). Note that since there are several examples of similarities in protein functional sites from evolutionarily unrelated proteins, which do not preserve the amino to carboxy terminal order of the matching residues, methods in this paper take no account of the sequential ordering of residues.
At the least restricted level, any residue was allowed to match any other, thus producing matches considering only the form or shape of the sites, in terms of the spatial arrangement of their constituent residues, irrespective of residues' identities and physicochemical properties. A more restricted scheme was also considered where residues were only allowed to match within the same physicochemical class: hydrophobic (A, F, I, L, M, P, V), polar (C, H, N, Q, S, T, W, Y), charged (D, E, K, R) or glycine (G).
It should be emphasised that this scheme was chosen to illustrate the value of the MCMC procedure, and that the procedure would be equally applicable to other possible atom matching schemes (e.g. involving more side chain atoms) or other physicochemical groupings.
Graph theoretic approach
Principles of graph theory have been applied to matching biomolecular configurations for some time [3, 7, 14, 18, 19, 23–26]. These techniques are also used in computer vision research [23, 27, 28]. In this study each functional site is represented by a mathematical graph where vertices are placed at amino acid positions. Each vertex is connected by an edge to every other vertex in the same graph and each edge is labelled with the interresidue distance [17]. Finding matching parts of the functional sites is equivalent to searching for maximum similarity between the graphs.
Combinatorial algorithms inherently require exhaustive search of the solution space. For example in graph matching an exhaustive search for solutions with various matching distance thresholds in a suitable range would be required to guarantee globally optimum solutions. In our applications Case 4 requires a different threshold to Cases 1–3 in order to give optimal matching. Case 4 requires a distance threshold of 1.0Å while Cases 1–3 require a distance threshold of 1.5Å. Stochastic approaches are the obvious candidate for consideration to avoid exhaustively searching the solution space.
The Bayesian model
The Bayesian framework is particularly appealing in specialised problem domains since the "objective" (the posterior joint distribution) is a product of the "prior" and the "likelihood". The likelihood gives an indication of how well the observed data is consistent with parameters of the model and the prior can be used to incorporate expert knowledge of the problem.
The likelihood in [16] can be interpreted on considering that some amino acids in the two functional sites are related (match) under rigid body motion transformation subject to Gaussian, N(0, σ^{2}) errors in the coordinates of the atoms. These errors could be due to crystallographic imprecision or protein phylogeny differences. The prior consists of the distribution on the transformation parameters. The joint posterior distribution (distribution of matching and transformation parameters given the data) is derived. The Bayesian method simultaneously estimates the matching and transformation parameters. Thus the whole posterior distribution is available to extract the statistical information on the parameters. Here we use a loss function to obtain point estimates of the matches being of the main interest. In the methods section we show the connection between the Bayesian method and minimising the RMSD when matches are known. Minimising RMSD is an appropriate criterion for optimising the geometrical transformation, given the matching. However, in no way does that logically imply that RMSD is an appropriate measure of quality of the matching itself – indeed one can trivially make the RMSD equal to 0 by matching just one pair of points, and in general minimised RMSD will increase with the number of points matched. RMSD can only be used as a measure for quality of match given the same number of matched points hence some other measures e.g. pvalues [9] are required to assess the quality of a match.
We have also incorporated the expert knowledge on amino acid types through a prior on the matches.
Assessing the quality of matches
A number of parameters are used to assess pairwise matching solutions. We first consider the number of matched residues and the root mean square deviation (RMSD) between matched atoms. It is intuitively clear that matches of lower RMSD over larger numbers of matching residues are more statistically significant. A measure of this significance has recently been suggested [9], and was modified in this work to correct for the number of amino acids in functional sites being matched. The null hypothesis considers that we are matching random configurations. However for matching more than two atoms (e.g. C_{ α }and C_{ β }) in a single amino acid the null hypothesis is still matching random configurations but with some dependency (constraints) for atoms within the same amino acid.
The formula proposed is based on the geometry of a match with a given RMSD level, taking into account the abundance of different amino acid types and the different geometry that applies when various number of atoms are used to represent each amino acid. An extreme value distribution was fitted to the number of matches with an observed RMSD or better. Thus Pvalues formula is:
P = 1  e^{E} (1)
where E is the expected number of matches with an observed RMSD or better. We calculated Evalues with a correction for the number of amino acids in the functional sites. The formula for expected number of matches with an RMSD value R_{ M }or better is found to be
where P, the number of binding sites that were matched corrects for database size [9, 31]. Φ is the product of percentage abundances of all matched amino acids, q is the number of matched amino acids, S is the number of amino acids with two atoms matched, T is the number of amino acids with more than two atoms matched. Our application uses dataset similar to previous studies [9, 31] hence we use the same empirically derived constants: a = 3.704 × 10^{6}, b = 1.790 × 10^{3}, y = 0.196 and z = 0.094. In our applications, T = 0. $C(m,n)=3!\left(\begin{array}{c}n\\ 3\end{array}\right)\left(\begin{array}{c}m\\ 3\end{array}\right)$ is a correction factor for the number of amino acids, m and n in the functional sites. The correction factor is derived by considering that matching 3 points exhausts all degrees of freedom in optimal matching of rigid bodies [25]. Indeed, the first exponent of R_{ M }: 2.93q  5.88 ≃ 3q  6 which is expected from the MardiaDryden distribution of sizeandshape [32] so there is some theoretical support to the fitted formula, partly because for q matches in threedimensions, the degrees of freedom are 3q  6 since we loose 3 degrees of freedom for translation and 3 for rotation.
Results
We considered two binding sites, the NAD binding site from an alcohol dehydrogenase structure (1hdx_1 in SITESDB with 60 amino acids), and a larger NADP binding site from a 17 – β hydroxysteroid dehydrogenase (1a27_0 in SITESDB with 63 amino acids) which includes both the cofactor and substrate binding regions. For these binding sites we performed the following matching studies

1)
A functional site of alcohol dehydrogenase against NAD(P)(H) binding sites from proteins in the same SCOP family as alcohol dehydrogenase (Alcohol dehydrogenaselike, Nterminal domain; SCOP: c.2.1.1).

2)
A functional site of 17 – β hydroxysteroid dehydrogenase against NAD(P)(H) binding sites from proteins in the same SCOP family as 17 – β hydroxysteroid dehydrogenase (Tyrosinedependent oxidoreductases; SCOP: c.2.1.2).

3)
The alcohol dehydrogenase functional site in (1) against NAD(P)(H) binding sites from proteins in the same SCOP superfamily as alcohol dehydrogenase but different families (SCOP: c.2.1.x; for x ≠ 1).

4)
The alcohol dehydrogenase functional site against
FAD/NAD(P)(H) binding sites from proteins in FAD/NAD(P)binding domain (SCOP: c.3.1.x).
The first of these test cases is the most straightforward, involving matching the NAD binding site against similar sites in closely related proteins. The second is similar, but more challenging in matching, because the larger 1a27_0 site also incorporates the substrate (oestradiol) binding region. The associated family (c.2.1.2) is functionally broad and members catalyse reactions on a variety of diverse substrate molecules leading to variations in functional site shapes. Matching methods therefore need to identify matches in the related cofactor binding region and ignore local site dissimilarities owing to substrate variation. The third test case considers similarities in sites with more distant evolutionary relationships (where sequence similarity between the protein domains concerned is very low, but the structural similarity of the Rossmann fold remains). The fourth test case examines the ability of the method to locate site similarities between different folds that bind the same or related ligands.
Case 1: Site 1hdx_1 matching against its own SCOP family
Figure 1a shows the results of using graph matching only where matching was performed with and without amino acid physicochemical property information. First note that in the less restricted matching scenario, without amino acid group information, matches generally involve more residues and similar or lower RMSDs, as would be expected. Thus, in the figure, the lines connecting the restricted matches (circles) with the unrestricted matches (crosses) for each site family member often have a gradient that is negative or close to zero.
In the case of matching without property information, most sites in the family show a match with 1hdx_1 with a low RMSD (< 1.5Å) and a significant number of corresponding residues (> 8). However, this is not the case when amino acid property information is taken account of, and a minority of the matches show relatively high RMSDs (> 1.5Å), over generally lower numbers of matching residues. Thus it appears that lower quality matches can result from the use of amino acid property information, perhaps because these close relatives have conserved the shape of the binding site but not the physicochemical characteristics. This may happen in binding site regions whose properties are not crucial to ligand binding; it is interesting here because with our use of very broadly defined physicochemical groups it implies significant changes of physicochemical properties.
Figures 1b and 2 show the effect of the MCMC refinement on the graph only matches of Figure 1a. The same basic conclusions can be drawn from Figure 1b as from Figure 1a. However, from Figures 1b and 2 it is clear that in a number of cases when matches with amino acid property information are considered, the MCMC refinement procedure produced significant improvements in the RMSDs (RMSD is improved from > 1.5Å to less than 1Å while also marginally increasing the number of matching residues). Thus the refinement procedure is able to improve some matches, even in this case of closely related sites.
The overall effect of the refinement procedure within this family can be considered in terms of the statistical significance of the matches obtained. This information is summarised in Table 1. When taking physicochemical properties into account, 125/145 sites produced significant matches before refinement, and this increased to 131/145 after. We use the pvalue 0.05 for the significance level. Without taking physicochemical properties into account, 142/145 sites produced significant matches (pvalue < 0.05) before MCMC refinement step; this increased to 143/145 sites after the refinement.
The improvement was a functional site from 2,4dienoylCoA reductase (1guf_5) which before refinement matched with an RMSD of 1.076Å, a number of corresponding amino acids equal to 13, and a pvalue of 0.08; after MCMC refinement step the RMSD was 1.127Å, the number of corresponding amino acids was 14 and pvalue was 0.02.
Some examples where the MCMC refinement step produced improvements with obvious biochemical relevance are the sites in quinone oxidoreductase (PDB code 1qor) and hypothetical protein YhdH (PDB code 1o8c). The proteins in this family share a well known glycine rich motif (GXGXXG) in the binding site. For 1qor_0, before MCMC refinement step, 2 glycines in dinucleotide binding motif GLGGVG were matched by graph matching alone and this increased to 3 glycines after MCMC refinement. In the case of 1o8c the motif includes 4 glycines, of which 3 were matched before MCMC refinement step and all 4 after. The full matches with these motifs highlighted are shown in Figures 3 and 4.
Case 2: 17 – β hydroxysteroid dehydrogenase and family
The effect of MCMC refinement on graph matches for the functional site of 17 – β hydroxysteroid dehydrogenase (1a27_0) matching against NAD(P)(H) binding sites within the same SCOP family (c.2.1.2) are shown in Figure 5 and Table 1. In the case of this more complex site the effect of MCMC refinement is greater, increasing the number of sites producing statistically significant matches from 248 to 318 of 326 sites. Figure 5 shows that most of these improvements are associated with an increased number of matching residues at a similar RMSD, but in a minority of sites RMSD also improved. Although this family catalyses reactions on a diverse range of substrates, the members have a clear evolutionary relationship, and statistically significant matches at least in the cofactor binding region should be expected. These results show that MCMC refinement of the initial match is often required for these to be detected. When comparing matching with and without aminoacid physicochemical property information similar results to those of Case 1 were obtained (see additional file 2).
Case 3: alcohol dehydrogenase and superfamily
In the case of the more distant evolutionary relationships probed by matching the site from alcohol dehydrogenase (1hdx_1) against members of the same SCOP superfamily but from different families, MCMC refinement also produced a large increase in the number of statistically significant matches. Of 897 sites, 200 produced significant matches using graph matching alone, and this was increased to 324 by MCMC refinement (see Table 1). As in Case 2 above, it is common with these more distantly related NAD(P) binding sites that significant matches involve the wellknown glycine rich motif. An example of a match with the site 3dbv_3 in the glyceraldehyde3phosphate dehydrogenase structure is shown in Figure 6, in which this motif is highlighted.
Case 4: alcohol dehydrogenase and FAD/NAD(P)binding domain
The FAD/NAD(P)binding domain is classified as a different fold in SCOP to the cases considered hitherto. Nevertheless, as its name suggests it binds ligands of interest in this work, NAD(P) and more commonly FAD. The latter dinucleotide ligand is related to NAD(P): approximately half of the molecule (an adenosine moiety and two phosphate groups) is identical to NADP while the other half differs substantially, with a flavin group replacing nicotinamide. It is known however that the ligand binding sites of this fold and the Rossmann fold are related, and both include glycine rich motifs associated with binding the shared phosphate groups. Thus some significant matches between these binding sites might be expected on biochemical grounds.
In this case, we consider matching without physicochemical group information with the initial graph theory match using a matching tolerance of 1Å. As shown in Table 1, 64 of the 338 site matches showed statistical significance with graph matching only, and a further 12 attained this with MCMC refinement.
Performance of MCMC
In addition to using RMSD as a diagnostic tool for monitoring convergence and using pvalues as an objective function to compare the performance of graphical and MCMC methods, we also consider diagnostic plots and quantities for the Bayesian model stability and MCMC convergence.
We can see (in additional files 1, 2, 3, 4) that the number of matches, $L={\displaystyle \sum _{jk}{M}_{jk}}$ at each iteration for most cases converged i.e. variance for L is very small. There are very few exceptions where convergence was not reached e.g. 1a71_1, 3hud_1 and 1pl8_7 in Case 1 when not using amino acid properties. Here variances for L are very big which suggest nonconvergence of the MCMC.
Figure 7 shows histograms and traces for parameters when matching 1a27_0 against 1cyd_1 (Case 1). Traces for number of matches (L), log σ, τ and rotation angles show good mixing, stationarity and that convergence was reached. Histograms for rotation angles are well peaked showing stability of the solution. For a detailed discussion on sensitivity analysis on hyperparameters for the model, see the methods section under sensitivity of hyperparameters.
Discussion
Since the connection between statistical and biological significance is not straightforward example applications above were carefully chosen to be well understood cases where matches can be interpreted relatively easily in biochemical terms. For structural and evolutionary relationships SCOP [33] was used. It has been seen that MCMC refinement step can provide significant improvement over graphmatching techniques.
In this paper the method uses matching schemes that are relatively unrestricted in terms of amino acid identity (either with no restriction or matching in broadly defined physicochemical groups). As currently formulated it is therefore better suited to the study of larger ligand binding sites, than smaller sites associated, for example, with enzymatic catalysis. The former are more likely to be defined by shape and physicochemical properties, while the latter depend critically on precise amino acid residue identities. For our example applications we have therefore chosen sites for the binding of some very common biochemical ligands related to NAD(P) (nicotinamide adenine dinucleotide (phosphate)) and FAD (flavin adenine dinucleotide). These ligands are bound as cofactors by a large variety of enzyme domains, many of which come from the Rossmann family of protein folds. Importantly, there are many proteins of known structure that bind these related cofactors ranging from close evolutionary relatives, through very distant relatives to proteins of different fold and likely independent evolutionary origin.
The examples given above make a clear case that MCMC refinement can improve ligand binding site matches generated by graph matching, in terms of both the statistical and biological significance of the match. We attribute this success to the lack of dependence on strict distance matching criteria, which are rigidly enforced in graph matching. Statistical modelling in refinement of matches appears to have been successful in automatically adapting to shape variations in ligand binding sites, which might be due to different noise levels in atomic positions or protein phylogeny differences, among other factors. Refined matches usually retain a similar RMSD, and achieve greater significance through expansion of the number of matching residues from the core graph match. We have noted however that in some cases significant reductions in the match RMSD are also achieved by refinement.
Dependence on a strict matching tolerance is not limited to graph matching, but is also a feature of other matching methods commonly used in the field (e.g. geometric hashing). It is important to note that the MCMC refinement procedure can be applied to a starting match generated by any method; and that the graph procedure chosen here was simply intended as an example. Equally MCMC procedure can be applied to matching with no previously generated starting match, for example by starting from randomly generated matches. That is, the MCMC method provides a standalone algorithm for matching. However, we find that obtaining good matches by this method is very expensive in terms of computational time. While methods such as graph matching can be applied to database searching, where a site is matched against all members of a large database of sites, this would be impractical for matching by MCMC alone with modest computing facilities. There is also a need for closely monitoring convergence diagnostics. We suggest therefore that the MCMC procedure would be most advantageous when applied to the best hits from a database search using a faster method, and that in many cases it would increase the number of significant hits. Thus this method is aimed at refining matches and complementing other methods e.g. graph matching as used here. Furthermore, the method provides the full joint posterior distribution so that we have for example, the posterior distribution for the matching matrix (giving probabilities on matches) as well as the parameters of the transformation simultaneously. There is flexibility in Bayesian approach due to the ability to specify distributions on matching coordinates and relative probabilities on the orientation of matching residues as opposed to using matching distance threshold as in combinatorial methods.
From our experiments, matching both C_{ α }and C_{ β }atoms in our extended model gives solutions with smaller RMSD values (for C_{ α }and C_{ β }atoms) than when matching using C_{ α }atoms only.
Our approach using MCMC with detailed balance update and drawing from the posterior of all parameters in principle help escape local maxima for the model better than alternative methods using for example an annealing schedule.
Furthermore, quantifying the quality of the solution by RMSD in addition to the number of matches ensures that reported improvements over graph matching (e.g. an increased number of matches in examples illustrated in Figures 2, 3, 4, 5) really occur in one single mode for the match matrix M. Thus a smaller RMSD guarantees that we have a proper summary for M as opposed to having a point estimate of the match matrix invalidly summarising two or several solutions that the Markov chain visited separately, each with a particular probability.
Conclusion
We have made only a very basic study of the effect of including aminoacid residue physicochemical property information in matching, contrasting matches obtained without restriction (any residue may match any other) with slightly more restrictive matching (residues only allowed to match within relatively broadly defined groups). It is interesting that even with very broadly defined groups, fewer statistically significant matches are generally obtained than when matching is without restriction. This could suggest that the physicochemical properties of sites binding the same or similar ligands can change significantly in evolution. It is however most likely to reflect increased flexibility to change in peripheral residues that are less important for binding, and needs further investigation. The main point of this work is that MCMC refinement can improve matches under either matching regime. Indeed in a few cases of matching with/out physicochemical groups, we showed that some graph matches without statistical significance were converted to significant matches by the MCMC procedure, revealing that using graph matching alone could lead to some erroneous conclusions in this respect.
Methods
We consider matching two functional sites X and Y using the graph theoretic method and the Bayesian modelling. First, we give the graph theoretical approach in the next section. We consider the Bayesian method in the following section.
Graph theoretic approach
Graphs, say G_{1} and G_{2} are constructed to represent sites X and Y respectively. Vertices are placed at amino acid positions and edges between vertices represent interatomic distances within the functional site. Similar subgraphs for G_{1} and G_{2} correspond to the matching parts of X and Y. A search for similar maximal subgraphs for G_{1} and G_{2} corresponds to finding a clique (a maximal complete subgraph) i.e. the biggest completely connected subgraph in the vertex product graph of G_{1} and G_{2}.
Definition: vertex product graph.
Denote sets of vertices for G_{1} and G_{2} by V_{1} and V_{2}; V_{1} = {X_{ j }, j = 1, 2, ..., m} and V_{2} = {Y_{ k }, k = 1, 2, ..., n}. A vertex product graph, say H_{ v }= G_{1} ○_{ v }G_{2} has a vertex set V_{ H }= V_{1} × V_{2} consisting of vertices defined for each pair (X_{ j }, Y_{ k }) with X_{ j }∈ V_{1} and Y_{ k }∈ V_{2} having the same attribute. An edge between two vertices v_{ h }= (X_{ j }, Y_{ k }), v_{ h' }= (X_{ j' }, Y_{ k' }) ∈ V_{ H }exists for j ≠ j' and k ≠ k' when
1.the absolute difference between distances x_{1j} x_{1j'} and y_{1k} y_{1k'} and
2. also the absolute difference between distances x_{2j} x_{2j'} and  y_{2k} y_{2k'}
are both less than 1.5Å (matching distance threshold).
In the least restrictive case all amino acids are assumed to have the same attribute and hence matching can occur between any amino acid and is only dependent on interresidue distances. Alternatively vertices can be labelled with residue physicochemical properties to restrict matching to amino acids in the same group.
In this work we used the clique detection algorithm of Carraghan and Pardalos [29] to find maximal common subgraphs. Graph matches based on interresidue distances are not necessarily superimposable (e.g. mirror image sites). Subsequently, a Procrustes algorithm [30] is used to check that matched configurations are geometrically superimposable.
Bayesian alignment
Recall that the matching between amino acids in X and Y is represented by a matrix M:
and the transformation to bring the configurations into alignment is x_{ ij }= Ay_{ ik }+ τ for M_{ jk }= 1, i = 1, 2 where A is a rotation matrix and τ is a translation vector.
Given the map M, it is straightforward using least squares estimation to calculate transformation parameters in order to bring the two configurations into registration or optimal alignment [30, 32]. However M, A and τ are all unknown.
The model for C_{ α }atoms only was developed in [16] and the joint posterior distribution is
where p(A), p(τ) and p(σ) denote prior distributions for A, τ and σ. A is the Jacobian of transformation from the space of X into the space of Y ; κ measures the tendency a priori for points to be matched and can be a function of concomitant information like amino acid types.
We assume presence of Gaussian noise N(0, σ^{2}) in the atomic positions for x_{1j}and y_{1k}thus φ(·) is the standard normal probability density function. Here the dimension, d = 3.
Connection with combinatorial algorithms
We note that there is strong relationship between (combinatorial) algorithms minimising least squares (RMSD) and the Bayesian approach with Gaussian error model. We now give the connection between the joint posterior in Equation 3 and the RMSD. Let us write the RMSD square fully as:
where $L={\displaystyle {\sum}_{j,k:{M}_{jk}=1}{M}_{jk}}$ or L denotes the number of matches.
In the Bayesian formulation the log likelihood (with uniform priors) is proportional to
where
Q = ΣM_{ jk }x_{1j} Ay_{1k} τ^{2}.
Note that for M_{ jk }= 1, we have Q = Σx_{1j} Ay_{1}k  τ^{2}. It can be seen that RMSD^{2} = Q/L where L is the number of matches. Hence RMSD and Q are functionally related. In particular, the maximum likelihood estimate of σ^{2} for a given matching matrix M is the same as the RMSD which is the least square estimate.
One way to understand this connection is to go back to the ordinary least square estimates for the regression analysis versus the maximum likelihood estimates under normal errors (i.e. least square versus GaussMarkov formulation). Sometimes purely algorithmic approach is justified but it has the underlying assumption of normality. The situation here is not too different where we are using likelihood estimators versus the RMSD. Thus in the above context of the statistical methodology and in particular the choice to base the combinatorial objective function on squared Euclidean distance is therefore equivalent to the choice to use Gaussian errors in the probability model. Note that with Gaussian errors in the probability model, the Bayesian modelling approach is very closely related to combinatorial and other methods which maximise objective functions of squared Euclidean deviations e.g. RMSD. In the Bayesian approach, the objective function is a probability distribution (the joint distribution of all unknowns given the data). In the combinatorial approach, the objective function is a measure of mismatch and the procedure is to choose the matching to minimise the objective function e.g. RMSD under some constraints (trivially RMSD can be zero by matching a single point). The two objective functions are very closely related mathematically.
Side chains orientation
So far each "site" in X and Y has consisted of a single location, such as a C_{ α }atom in an amino acid. But for each C_{ α }atom there is also a neighbouring C_{ β }atom which can be paired to it. Thus the matching criterion can be extended to require a close match not only for C_{ α }atoms in different configurations but also for the edges connecting C_{ α }atoms to their C_{ β }atoms.
The Bayesian model in Equation 3 is extended here whereby we take into account relative orientation (direction information) of side chains by using C_{ α }and C_{ β }atoms in matching amino acids. Note that positions of C_{ α }and C_{ β }atoms from the same amino acid are dependent. Thus x_{1j}and x_{2j}are dependent. Similarly, y_{1k}and y_{2k}are dependent.
To motivate the extension of the model to account for side chain orientations, we assume initially that x_{1j}and x_{2j}are a population configuration whereas y_{1k}and y_{2k}are a sample configuration. Now we can interpret Equation 3 above (which corresponds to equation 6 in [16]) and write
Ay_{1k}+ τ X_{1j}~ N(x_{1j}, σ^{2}I). (5)
We extend the model by considering how to model Ay_{2k}given x_{1j}, x_{2j}and Ay_{1k}. Taking into account that there is variation only perpendicular to the axis x_{2j} x_{1j}, it is plausible to take
Ay_{2k}x_{1j}, x_{2j}, y_{1k}~ N(x_{2j} x_{1j}+ Ay_{1k}, Ψ)
or
A(y_{2k} y_{1k}) x_{1j}, x_{2j}, y_{1k}~ N(x_{2j} x_{1j}+ Ay_{1k}, Ψ) (6)
where Ψ = ψ_{1}I + ψ_{2} (x_{2j} x_{1j})(x_{2j} x_{1j})^{T}, ψ_{1} = σ^{2}, ψ_{2} < 0. The second term of the covariance matrix allows variations only in the plane perpendicular to the C_{ α }→ C_{ β }axis.
The basic likelihood can be reformulated however we favour a spherical distribution for A(y_{2k} y_{1k})x_{1j}, x_{2j}, y_{1k}instead of an elliptical (anisotropic) normal distribution because we want to ensure the symmetry in X and Y . We note that relative (rather than absolute) values of the probabilities for various matches are essentially important and in practice we do not expect much difference by using an elliptical distribution compared to using the spherical distribution.
Using spherical distribution for A(y_{2k} y_{1k})x_{1j}, x_{2j}, y_{1k}case, the joint posterior for y_{1} and y_{2} given x_{1} and x_{2} becomes
We now relax the assumption of x_{1j}and x_{2j}being given in Equation 7 and the joint density does not alter. This is the extension to our use of Equation 3.
The joint posterior distribution p(M, A, τ, σ, x_{1}, y_{1}, x_{2}, y_{2}) quantifies uncertainty in the unknown quantities M, A, τ, σ, after observing the data. Here t and σ^{2} are taken to have prior Gaussian and gamma distributions respectively. These priors are plausible for τ and σ in matching functional sites. The match matrix M is a priori a uniformly distributed random variable over all match matrices and we sample from this using the Metropolis algorithm (see below – updating M) with a move set consisting of proposals to add a match, delete a match or switch matches. The rotation matrix A is assumed to have prior matrix Fisher distribution [21, 22].
Markov chain Monte Carlo (MCMC) methods are used to sample from the full joint distribution in Equation 7. This provides an extremely flexible basis for reporting various aspects of the full joint posterior p(M, A, τ, σ, x_{1}, y_{1}, x_{2}, y_{2}) that are of interest. For example the maximum of this function would provide a (naive) point estimate of the unknowns.
Note that Equation 7 takes us back into the framework of sample configurations. We now indicate how the model extends the concept of the RMSD for the paired case. We show that the "objective" in Equation 7 is a function of RMSD (for C_{ α }atoms only in Equation 4) and the angle for orientation difference between the matched amino acids. Denote the RMSD for C_{ α }atoms only in Equation 4 as RMSD_{ α }. Let v_{1} = x_{2j} x_{1j}and v_{2} = y_{2k} y_{1k}. Equation 7 is a function of RMSD_{ α }+ v_{1}  Av_{2}^{2}. Note that v_{1}  Av_{2}^{2} = v_{1}^{2} + v_{2}^{2}  $2{v}_{1}^{T}{v}_{2}$ and v_{1} ≈ v_{2} ≈ 1.54Å; ${v}_{1}^{T}{v}_{2}$ = v_{1} · v_{2} cos θ ≈ 1.54^{2}cos θ where θ is the angle between v_{1} = x_{2j} x_{1j}and v_{2} = y_{2k} y_{1k}i.e. the angle between C_{ α }→ Cβ directions for matched amino acids. Thus v_{1}  Av_{2}^{2} ≈ 2 × 1.54^{2}(1  cos θ) and the "objective" in Equation 7 involves the vector RMSD,
RMSD_{ αβ }= RMSD_{ α }+ v_{1}^{2} + v_{2}^{2}  2 × v_{1}·v_{2} cos θ ≈ RMSD_{ α }+ 2 × 1.54^{2}(1  cos θ). (8)
Thus the method extends RMSD for C_{ α }atoms in the objective function (model) by adding angles in the paired (C_{ α }, C_{ β }) points.
Computational implementation
The additional term in the new full likelihood does not involve τ hence the posterior and updating of τ is unchanged to that in [16].
Rotation matrix
The full conditional distribution of A is
Thus
where the summation is over j, k:M_{ jk }= 1 and
Thus with p(A) ∝ exp(tr${F}_{0}^{T}$A) for some matrix F_{0}, then the full conditional distribution of A given data and values for all other parameters has the same form with F_{0} replaced by
Updating M
It can be shown (equation 8 in [16]) that acceptance probability for adding a match (j, k) is min(1, a_{ r }),
Similarly, the acceptance probability for switching the match of X_{ j }from Y_{ k }to Y_{ k' }(equation 9 in [16]) is min(1, a_{ r }),
and for deleting the match (j, k) is min(1, a_{ r }) where
Point estimates for A, τ and M
Posterior means are taken as estimates for transformation parameters A and τ [16].
Point estimate for the match matrix, M
Assignments are made to minimise error rates: P(${\widehat{M}}_{jk}$ = 1M_{ jk }= 0) and P(${\widehat{M}}_{jk}$ = 0M_{ jk }= 1).
Suppose that the loss is ℓ_{ ab }for declaring ${\widehat{M}}_{jk}$ = b for b = 0, 1 when p_{ jk }= P(M_{ jk }= a), a = 0, 1; for example, ℓ_{01} is the loss associated with declaring a match between X_{ j }and Y_{ k }when there is really none, that is, a "false positive". A false negative is ℓ_{10}. An optimal Bayesian point estimate of M is given using a loss function which penalises false positive (ℓ_{01}) and false negative (ℓ_{10}) matches. This optimum is controlled by a cost ratio K = ℓ_{01}/(ℓ_{01} + ℓ_{10}). Note that for K = 0.5 false positive and false negative matches are equally undesirable whereas for K = 0.75 i.e. ℓ_{01} = 3 × ℓ_{10} used in this paper, accepting matches when there are no "true" matches is heavily penalised.
We minimise the expected sum of losses at each entry of M with respect to the MCMC chain target distribution (the posterior distribution) by using empirical estimates of matching probabilities p_{ jk }= ∑M_{ jk }where the sum is taken over the number of iterations after burnin. That is we are averaging over M and we minimise
The last sum does not depend on ${\widehat{M}}_{jk}$, hence interested in minimising the first part:
where
K = (ℓ_{01}  ℓ_{00})/(ℓ_{10}  ℓ_{11}  ℓ_{00})
and p_{ jk }= P(M_{ jk }= 1x, y) is the posterior probability that (j, k) is a match, which is estimated by the empirical frequency of this match from an MCMC run.
Thus $\widehat{M}$ is a solution to a "linear assignment" problem with cost matrix (p_{ jk } K). A standard linear assignment program (lpsolve [34]) is used to find $\widehat{M}$ with the cost matrix (p_{ jk } K)_{+} and we take ℓ_{11} = ℓ_{00} = 0 (there is no cost for declaring true matches and also identifying true nonmatching amino acids). We penalise (avoid) false positives more than false negatives i.e. we take $K=\frac{{\ell}_{01}}{{\ell}_{01}+{\ell}_{10}}=0.75$
We note that although arguably point estimates are most important to a molecular biologist, by maintaining detailed balance and drawing from the posterior of all parameters MCMC provides a way to escape local maxima for the model. Furthermore, it provides an easy framework for quantifying uncertainty in parameters and alternative solutions. Besides the MCMC approach goes further to give statistical understanding of the distribution of matches, transformation, correspondence parameters and the loss function.
Accounting for amino acid groups
The matching indicator M_{ jk }is constrained to be zero, in the probability model and all algorithmic steps, for amino acids j, k in different amino acid groups. This strictly matches amino acids in the same group only. This way, unlike in [16] and similar to graph theoretic method, we do not utilise a probability distribution for κ in Equation 7.
MCMC refinement step
We now describe a hierarchical decision rule to assess the improvement from graph method. Figure 8 shows the refinement decision tree. Arrows show flow directions, boxes with curved corners show processes and their output while boxes with sharp corners are for branching conditions. The procedure starts with graph matching to obtain the solution, M_{ G }and the corresponding RMSD and the number of matches: RMSD_{ G }and L_{ G }respectively. We use MCMC sampling in the Bayesian modelling starting from the rotation and translation obtained from the graph solution M_{ G }. We iteratively start from β = 1.5, 0.9, 0.5 (for the noise parameter σ^{2} ~ Γ(α, β)) and κ = 0.00005, 0.0001, 0.0005, 0.005. We find the MCMC solution M_{ B }with the RMSD value say, RMSD_{ B }and the number of matches L_{ B }. We monitor convergence and quality of the solution in terms of RMSD, statistical significance and the number of matched amino acids. The MCMC solution M_{ B }is primarily assessed against the graph solution M_{ G }using pluggedin RMSD (defined below) and the number of matches. We stop if MCMC solution is better than the graph method or we have exhausted all the combinations of β and κ values.
Note that M_{ B }is clearly better than M_{ G }if RMSD_{ B }<RMSD_{ G }and L_{ B }> L_{ G }while M_{ G }is clearly better than M_{ B }if RMSD_{ B }> RMSD_{ G }and L_{ B }<L_{ G }. If these conditions do not hold (when the pluggedin RMSD for MCMC is smaller than the graph method but on the other hand the graph solution has the bigger number of matches or vice versa), we use pvalues for M_{ B }and M_{ G }using Equations 1 and 2. We denote the pvalues for M_{ B }and M_{ G }by P_{ B }and P_{ G }respectively. M_{ B }is better that M_{ G }if P_{ B }<P_{ G }.
In rare cases after all the steps, if the MCMC solution is not better then we restart the whole decision tree. Note that this situation is very rare, for example, in all the significant matches reported in Table 1, only one match by MCMC drifted into a poor solution than the graph method. A second MCMC run on this particular matching converged to the same solution as the graph method. Most likely the first run for this matching might not have converged. We observe that a rerun of the MCMC might be necessary in those rare occurrences where the MCMC gives a poor solution. From our experiments, we find that in most situations, a second run would suffice for the nonconverging cases and thus our MCMC procedure is robust.
Once we have an improved solution from MCMC and find that its pvalue is statistically significant (whereas the graph solution was not significant), we examine the match for chemical properties.
By pluggedin RMSD we mean using point estimates of the transformation parameters A and τ obtained from the Bayesian model to calculate the RMSD for the aligned matching amino acids. In the decision tree we use the average pluggedin RMSD for C_{ α }and C_{ β }atoms:
where C_{ β }atoms are matched as well for the j'th and k'th amino acids. L = ∑_{j, k}M_{ jk }is the number of matches and L_{0} = ∑_{j', k'}M_{ j' k' }is the number of matches with two atoms matched for both the j'th and k'th amino acids.
Hyperparameters
We now want to give values of the hyperparameters and fixed parameters used in this paper. For prior distributions for σ^{2} ~ Γ(α, β), τ ~ N(μ_{ τ }, ${\sigma}_{\tau}^{2}$ we used α = 1, β iteratively took values 1.5,0.9,0.5 (see above: MCMC refinement step),${\mu}_{\tau}={\displaystyle \sum _{j}{x}_{1j}/m}{\displaystyle \sum _{k}{y}_{1k}/n,{\sigma}_{\tau}=15}$. We used γ = 0.5 and this value is found to work well in case of all considered functional sites in SITESDB. The cost ratio for declaring "false" matches is taken to be $K=\frac{{\ell}_{01}}{{\ell}_{01}+{\ell}_{10}}=0.75$.
Sensitivity of hyperparameters in MCMC
The method is not observed to be sensitive to hyperparameters for τ and σ (also see [16]). Mean values for τ ranging from 0 to the difference in centres of mass for the sites have worked in many cases of matching functional sites in SITESDB. Weak priors e.g. standard deviation values for τ in the range of 5 to 50Å have worked very well. With shape parameter for the prior Gamma distribution for σ^{2} set to 1, scale parameter values in the range of 0.5–50 have given satisfactory results in many cases. For κ, values in the range of 0.0001 – 0.003 have been observed to give optimal results in many examples. In our implementation we track all parameters for MCMC. Histogram and trace plots for parameter values can be used to check MCMC convergence and model stability. In addition we have used RMSD as a complimentary diagnostic tool, namely if RMSD is relatively large then we continue iterations.
References
 1.
Shindyalov IN, Bourne PE: Protein structure alignment by incremental combinatorial extension (CE) of the optimal path. Protein Eng. 1998, 11: 73947. 10.1093/protein/11.9.739.
 2.
Holm L, Sander C: Protein structure comparison by alignment of distance matrices. J Mol Biol. 1993, 233: 12338. 10.1006/jmbi.1993.1489.
 3.
Artymiuk PJ, Poirrette AR, Grindley HM, Rice DW, Willett P: A graphtheoretic approach to the identification of threedimensional patterns of amino acid sidechains in protein structures. J Mol Biol. 1994, 243: 32744. 10.1006/jmbi.1994.1657.
 4.
Binkowski TA, Adamian L, Liang J: Inferring functional relationships of proteins from local sequence and spatial surface patterns. J Mol Biol. 2003, 332: 50526. 10.1016/S00222836(03)008829.
 5.
Kinoshita K, Sadanami K, Kidera A, Go N: Structural motif of phosphatebinding site common to various protein superfamilies: allagainstall structural comparison of proteinmononucleotide complexes. Protein Eng. 1999, 12: 114. 10.1093/protein/12.1.11.
 6.
Kinoshita K, Furui J, Nakamura H: Identification of protein functions from a molecular surface database, eFsite. J Struct Funct Genomics. 2002, 2: 922. 10.1023/A:1011318527094.
 7.
Kleywegt GJ: Recognition of spatial motifs in protein structures. J Mol Biol. 1999, 285: 188797. 10.1006/jmbi.1998.2393.
 8.
ShulmanPeleg A, Nussinov R, Wolfson HJ: Recognition of functional sites in protein structures. J Mol Biol. 2004, 339: 60733. 10.1016/j.jmb.2004.04.012.
 9.
Stark A, Sunyaev S, Russell RB: A model for Statistical Significance of Local Similarities in Structure. J Mol Biol. 2003, 326 (5): 13071316. 10.1016/S00222836(03)000457.
 10.
Wallace AC, Borkakoti N, Thornton JM: TESS: a geometric hashing algorithm for deriving 3D coordinate templates for searching structural databases. Protein Sci. 1997, 6: 230823.
 11.
Blow DM, Birktoft JJ, Hartley BS: Role of a buried acid group in the mechanism of action of chymotrypsin. Nature. 1969, 221: 33740. 10.1038/221337a0.
 12.
Wright CS, Alden RA, Kraut J: Structure of subtilisin BPN' at 2.5 angstrom resolution. Nature. 1969, 221: 23542. 10.1038/221235a0.
 13.
Orengo CA, Jones DT, Thornton JM: Protein superfamilies and domain superfolds. Nature. 1994, 372: 6314. 10.1038/372631a0.
 14.
Schmitt S, Kuhn D, Klebe G: A New Method to Detect Related Function Among Proteins Independent of Sequence and Fold Homology. J Mol Biol. 2002, 323 (2): 387406. 10.1016/S00222836(02)008112.
 15.
Gold ND, Jackson RM: Fold Independent Structural Comparisons of ProteinLigand Binding Sites for Exploring Functional Relationships. J Mol Biol. 2006, 355 (5): 11121124. 10.1016/j.jmb.2005.11.044.
 16.
Green PJ, Mardia KV: Bayesian alignment using hierarchical models, with applications in protein bioinformatics. Biometrika. 2006, 93 (2): 235254. 10.1093/biomet/93.2.235.
 17.
Gold ND: Computational approaches to similarity searching in a functional site database for protein function prediction. 2003, Ph.D thesis, Leeds University, School of Biochemistry and Microbiology
 18.
Gibrat JF, Madej T, Bryant SH: Surprising similarities in structure comparison. Curr Opin Struct Biol. 1996, 6 (5): 377385. 10.1016/S0959440X(96)800583.
 19.
Krissinel E, Henrick K: Secondarystructure matching (SSM), a new tool for fast protein structure alignment in three dimensions. Acta Crystallographica Section D. 2004, 60 (1): 22562268.
 20.
Berman HM, Westbrook J, Feng Z, Gilliland G, Bhat TN, Weissig H, Shindyalov IN, Bourne NE: The Protein Data Bank. Nucleic Acids Research. 2000, 28: 235242. 10.1093/nar/28.1.235.
 21.
Downs TD: Orientation statistics. Biometrika. 1972, 59: 665676. 10.1093/biomet/59.3.665.
 22.
Mardia KV, Jupp PE: Directional Statistics. 2000, Chichester: John Wiley and Sons Ltd
 23.
Willett P: ThreeDimensional Chemical Structure Handling. 1991, New York: John Wiley and Sons Inc
 24.
Ghose AK, Crippen GM: Geometrically feasible binding modes of a flexible ligand molecule at the receptor site. Journal of Computational Chemistry. 1985, 6 (5): 350359. 10.1002/jcc.540060504.
 25.
Kuhl FS, Crippen GM, Friesen DK: A Combinatorial Algorithm for Calculating Ligand Binding. Journal of Computational Chemistry. 1984, 5 (1): 2434. 10.1002/jcc.540050105.
 26.
Golender V, Rozenblit A: Logical and Combinatorial Algorithms for Drug Design. 1983, Letchworth: Research Studies Press
 27.
Barrow HG, Tenenbaum JM: Computational vision. Proceedings of the IEEE. 1981, 69: 572595.
 28.
Barrow HG, Burstall RM: Subgraph isomorphism, matching relational structures and maximal cliques. Information Processing Letters. 1976, 4: 8384. 10.1016/00200190(76)900491.
 29.
Carraghan R, Pardalos PM: Exact algorithm for the maximum clique problem. Operations Research Letters. 1990, 9375.
 30.
Kabsch W: A discussion of the solution for the best rotation to relate two sets of vectors. Acta Cryst A. 1978, A34: 827828. 10.1107/S0567739478001680.
 31.
Torrance JW, Bartlett GJ, Porter CT, Thornton JM: Using a Library of Structural Templates to Recognise Catalytic Sites and Explore their Evolution in Homologous Families. J Mol Biol. 2005, 347 (3): 565581. 10.1016/j.jmb.2005.01.044.
 32.
Dryden IL, Mardia KV: Statistical Shape Analysis. 1998, Chichester: John Wiley
 33.
Andreeva A, Howorth D, Brenner SE, Hubbard TJP, Chothia C, Murzin AG: SCOP database in 2004: refinements integrate structure and sequence family data. Nucl Acid Res. 2004, 32 (1): D226D229. 10.1093/nar/gkh039.
 34.
Berkelaar M: lpsolve – Simplexbased code for linear and integer programming. 1996, [http://www.cs.sunysb.edu/~algorith/implement/lpsolve/implement.shtml]
Acknowledgements
We are grateful to Alexander Stark and Robert Russell for kindly providing the code for calculating pvalues. We thank Wally Gilks, Thomas Hamelryck, John Kent and the referees for their helpful and important comments. The second author acknowledges funding from Universities UK Overseas Research Council for his research studies during which this work was done. The fourth author acknowledges funding from BBSRC.
Author information
Affiliations
Corresponding author
Additional information
Authors' contributions
KVM, PJG contributed to the formulation of the model and methodology. KVM and VBN contributed to the formulation to account for side chains. VBN, DRW, KVM contributed to the design (refinement step). PJG, NDG and VBN contributed to the design, development and implementation of software. DRW and NDG provided data. VBN performed the computations and statistical analysis. NDG performed the biological analysis. VBN, NDG, DRW and KVM drafted the manuscript. DRW conceived of the study. KVM, VBN and PJG revised the manuscript. All authors read and approved the final manuscript.
Electronic supplementary material
Case 2 Results
Additional file 2: . Results for 17 – β hydroxysteroid dehydrogenase and family. Tables 1–5: Without amino acid property. Tables 6–10: With amino acid property. (PDF 79 KB)
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Mardia, K.V., Nyirongo, V.B., Green, P.J. et al. Bayesian refinement of protein functional site matching. BMC Bioinformatics 8, 257 (2007). https://0doiorg.brum.beds.ac.uk/10.1186/147121058257
Received:
Accepted:
Published:
DOI: https://0doiorg.brum.beds.ac.uk/10.1186/147121058257
Keywords
 Markov Chain Monte Carlo
 Root Mean Square Deviation
 Functional Site
 Ligand Binding Site
 Graph Match