 Software
 Open Access
 Published:
SIMMAP: Stochastic character mapping of discrete traits on phylogenies
BMC Bioinformatics volume 7, Article number: 88 (2006)
Abstract
Background
Character mapping on phylogenies has played an important, if not critical role, in our understanding of molecular, morphological, and behavioral evolution. Until very recently we have relied on parsimony to infer character changes. Parsimony has a number of serious limitations that are drawbacks to our understanding. Recent statistical methods have been developed that free us from these limitations enabling us to overcome the problems of parsimony by accommodating uncertainty in evolutionary time, ancestral states, and the phylogeny.
Results
SIMMAP has been developed to implement stochastic character mapping that is useful to both molecular evolutionists, systematists, and bioinformaticians. Researchers can address questions about positive selection, patterns of amino acid substitution, character association, and patterns of morphological evolution.
Conclusion
Stochastic character mapping, as implemented in the SIMMAP software, enables users to address questions that require mapping characters onto phylogenies using a probabilistic approach that does not rely on parsimony. Analyses can be performed using a fully Bayesian approach that is not reliant on considering a single topology, set of substitution model parameters, or reconstruction of ancestral states. Uncertainty in these quantities is accommodated by using MCMC samples from their respective posterior distributions.
Background
Mapping characters on phylogenies provides a historical framework essential to our understanding of the evolution of behavioral, morphological, ecological, and molecular traits [1–3]. In addition, knowledge of the patterns of character change along a phylogeny has proven valuable to our understanding of the process of selection [4, 5] and neutral evolution [6–8].
The parsimony method is almost universally used to map characters. Indeed, user friendly programs that implement the parsimony method are available (e.g., MacClade, [9] and Mesquite, [10]). Parsimony attempts to minimize the number of changes along a phylogeny in a manner that is consistent with the character states observed at the tips. This is accomplished by identifying character states at the internal nodes of the tree that produce the minimum number of changes. Unfortunately, parsimony has a number of significant limitations. First, and most importantly, it assumes that along any branch that only a single change has occurred, regardless of the evolutionary time spanned. Second, parsimony can severely underestimate the variance in ancestral state assignments by considering only those ancestral reconstructions that minimize the number of changes on the phylogeny. Finally, parsimony does not provide a framework for accommodating uncertainty in the phylogenetic reconstruction.
Two alternative approaches have attempted to address some of the drawbacks inherent to parsimony: maximum likelihood [2] and Bayesian inference [11]. Both use stochastic models of character state change and thus can explicitly accommodate uncertainty in ancestral states. The Bayesian approach accommodates phylogenetic uncertainty by evaluating character maps on trees sampled from the posterior distribution [11, 12]. However, these methods still rely on parsimony to determine the identity of the character state changes and thus suffer from the restriction of placing, at most, a single state change along a branch. One way of avoiding these problems is to estimate the rates of character change using maximum likelihood rather than explicitly mapping changes to the tree [13]. While, for many questions, this approach will be appropriate, it unfortunately lacks information about the location and identity of specific character state changes on the phylogeny.
Bayesian mutational mapping
The mutational mapping approach [14–16], recently introduced, does not suffer from the problems of parsimony or the limitations of hybrid methods. In addition, this approach estimates the timing (placement) of changes along branches, providing a novel level of inference previously unavailable. While this Bayesian approach offers a better framework for addressing questions about character evolution we should recognize that as with all methods factors such as the use of an incorrect substitution model (or the model's assumptions) [17] or improper priors could lead to incorrect inferences [18].
A character, or mutational, map represents the character's history across the phylogeny. What we would like to accomplish is to sample character histories in proportion to their posterior probabilities. Formally, we would like to evaluate the following distribution,
where M are character histories, D is the data, θ is a vector containing parameters of the substitution model, τ is the topology, v is the vector of branch lengths associated with τ, and ψ is the set of possible topologies. The dimensionality of the problem, for all but the simplest topologies, prohibits a direct analytical evaluation. Fortunately, methods such as MCMC can be used to sample topologies, branch lengths, model parameters, and character histories [15]. The following describes the algorithm implemented in SIMMAP.
Given a topology, branch lengths, and substitution model parameters a character history can be sampled using the following threestep algorithm. Briefly,

1.
Calculate conditional likelihood for each character state at each node of the tree, including the root,

2.
Simulate ancestral states at each internal node by sampling from the posterior distribution of states, and

3.
Simulate a substitution (mutational) history, by sampling from the posterior distribution conditioned on the reconstructions in step 2 and observed states at the tips of the topology. The waiting times between substitutions are drawn from an exponential distribution with the rate being the diagonal elements of the model's instantaneous rate matrix (Q), conditioned on the current state (see below).
Often the states at the tips of the tree are unknown or uncertain (e.g., ?, N, R, etc). This type of uncertainty can easily be accommodated by revisiting these nodes after simulating ancestral states for the internal nodes and repeating Step 2 for the tips. By following this algorithm we have obtained a single sample (or realization) of a character history.
Let us look more closely at each of these steps. The first step in the algorithm requires the calculation of conditional likelihoods, l, of each state at each internal node of the tree. Given instantaneous rates of substitution given by the model's Q matrix and the length of the branch (v) associated with the node we can easily calculate substitution probabilities as P = p_{ ij }(v) = e^{Qv}. In a number of cases, such as the JC69 model [19], analytical solutions have been described. In cases in which analytical solutions are unavailable standard linear algebra approaches for exponentiating matrices can be used (e.g., LAPACK [20]). With these probabilities we can efficiently calculate the conditional likelihoods using the postorder traversal pruning algorithm of Felsenstein [21].
Next, we want to sample ancestral states at the internal nodes of the tree using the conditional likelihoods calculated in step 1. Starting at the root of the tree, denoted as σ, we stochastically simulate a state d using the following,
where, for example, Ω = {A, C, G, T} for DNA.
Once we have sampled a state at the root, d_{ σ }we simulate ancestral states at each internal node using a preorder traversal tree by sampling from the following,
Now, we have assigned ancestral states at the internal nodes. The final step of the algorithm we will simulate a realization of character history along each branch (using a preorder traversal) conditional on the ancestral reconstructions and observations at the tips of the topology. Each realization is simulated using a continuoustime Markov chain in which substitutions are modeled as a Poisson process. The waiting times until a character change along a branch for the Poisson is
λe^{λv} (4)
with the rate λ = q_{ ii }. This rate is derived from the diagonal elements of the model's Q matrix. These elements can be interpreted as the overall rate of changing from state i. Waiting times are simulated using the inverse transformation method. If the waiting time is longer than the branch length, v, and the states at each end of the branch are the same, then the realization is complete; no changes have occurred along this branch. However, if the waiting time is smaller than the branch length, v, then a substitution is drawn from, ${p}_{ij}=\frac{{q}_{ij}}{{q}_{ii}}$, and a new waiting time is simulated using the new length, v  v_{1}. If this next waiting time exceeds the remaining length of the branch, and the states are the same, the realization is complete. On the other hand, if the states are different, the process is repeated from the ancestral node, because the realization is not consistent with the state at the descendant node. If we were to proceed from the previous transformation on the branch the waiting times would no longer be exponentially distributed.
While we could sample a character history without first sampling ancestral states (Step 2 above) this would substantially increase the computational time required. The reason for this is that most of the histories would be rejected because they are not consistent with the observed data. This would require a new history for the whole tree to be resampled rather than simply rejecting the history along a single branch as in the algorithm above. It should be remembered that we want to sample histories conditional on the observations at the tips of the tree – Pr(HistoryData). By sampling ancestral states from their posterior distribution first we are reducing the number of histories that are rejected and increasing the acceptance of samples from the desired probability distribution.
Often, we are primarily interested in inferring some aspect of a character's evolution and not the particulars of the phylogeny or other parameters. We would like to avoid making inferences based on a single topology because it is rarely known with certainty. Rather we would like to integrate over this uncertainty. Therefore, to accommodate uncertainty in both model parameters and the phylogeny SIMMAP samples character histories for each parameter sample from the posterior distribution; topologies and parameter values are thus sampled in proportion to their posterior probabilities. Samples from these distributions can be obtained by MCMC using software such as MrBayes [22]. A sample of character histories obtained in this way can then be summarized to test a variety of hypotheses, such as, the number of gains and losses of a trait, correlated character evolution, number of synonymous and nonsynonymous changes, patterns of amino acid evolution (e.g., rates of conservative versus radical substitution), and the placement and order of changes on the phylogeny. In this latter type of analysis we are interested in only those histories that are consistent with presence of a particular group. The absence of a group in a particular topology sampled from the posterior poses no problem as the hypothesis is now conditional on its presence; topologies not consistent with the presence of a group can be ignored and the resulting sampled histories are from the conditional distribution.
In addition to implementing the above approach of stochastic posterior character mapping, SIMMAP also allows sampling from posterior predictive densities to evaluate the significance of hypotheses [16, 23]. Briefly, this method generates a distribution of character histories under a null hypothesis which are summarized by a test statistic and then compared to the observed test statistic. For example, it is straightforward to test for nonrandom associations between characters (see below). The predictive probability of the observed test statistic can be calculated using the tail areas of the statistic under the null model. (For a more detailed description of predictive distributions, see [24].)
Implementation
Brief overview
SIMMAP is Graphical User Interface (GUI) program written to run on the Apple's OS X operating system. SIMMAP reads in 1) a NEXUS data file containing a matrix of DNA, RNA, or morphological (standard) characters, 2) a file containing trees in the Newick format, and 3) a text file containing DNA substitution model parameter values. Data, trees, and parameters are displayed graphically and can be manipulated by the user. For example, characters and taxa can be included, excluded, and trees can be rooted and a variety of, a priori, branch lengths can be applied. Trees and character maps are drawn with user customized labels at the tips, font sizes, branch length thickness, and color schemes for easy identification of character states.
SIMMAP can be used to sample character histories on phylogenies to address questions about evolutionary patterns of change, positive selection at focal sites or across a gene region, and correlation among characters. In addition, SIMMAP can be used to calculate the posterior distribution of ancestral states. SIMMAP is a software implementation of the approach described by Nielsen [23] and Huelsenbeck et al. [16] with a couple of minor extensions. First, SIMMAP effectively deals with uncertain or unknown character states at the tips of the tree (see above). Second, new test statistics for measuring covariation between characters are implemented as described below.
Substitution models
SIMMAP implements stochastic substitution models for both molecular and standard characters. When analyzing nucleotide data the user can implement the most general 4 × 4 model of DNA sequence evolution [25], and all submodels. Among site rate variation can be accommodated using a discrete gamma [26], invariable sites, or sitespecific models [27]. Parameters for the models can be set manually by the user, read in from the contents of a file, or a mixture of the two.
Morphological character evolution is implemented using the M_{ k }class of models [28], with up to 7 states. Two priors are placed on morphological models: a discrete gamma prior on the overall rate of morphological character evolution, and a discrete symmetrical beta prior on the bias parameter of the M_{2}model [16, 29]. The user can customize these priors by selecting the parameters of the prior distributions and the number of categories used to make the distribution discrete. The number of samples drawn from the priors can be adjusted to allow a sufficient sampling approximation of the posterior distribution on bias and rates. For binary characters, the posterior distribution of the bias parameter can be used to make inferences about the pattern of evolution while accommodating uncertainty in the underlying phylogeny and branch lengths.
There is no clear rule of thumb as to the values of the parameters for the prior distributions or how many samples should be drawn to provide a sufficient approximation. Users should try a variety of parameter values and sample sizes to ensure that their inferences are not changing dramatically.
Character histories
SIMMAP allows the user to explore single character histories visually one at time, or perform multiple realizations of sampling from the posterior of character histories. The analyses can be tailored to evaluate a single character (nucleotide, codon, or standard character) or multiple characters, on a single tree or a set of trees, over a set of model parameters or priors, and with a user defined number of samples.
SIMMAP summarizes character histories across the phylogeny using the posterior expectation of different statistics (Table 1). Briefly, SIMMAP reports the expected number of changes (e.g., Ile ? Leu), the direction of changes if the tree is rooted (e.g., Ile ? Leu), the types and expected number of changes on each branch (e.g., number of nonsynonymous/synonymous changes), and the correlation between characters. In addition to these summary statistics the details of each individual history can be written to a file as a tab delimited file for analysis by an external program. SIMMAP also offers the option of saving the raw character history data in a modified Newick tree format. For example, a character history for a three taxon tree is represented in the following way:
((Taxon1:{A,0.1;C,0.1}, Taxon2:{T,0.1;C,0.1}):{C,0.1}, Taxon3:{C,0.4})
where a branch is divided into intervals representing the character's history along the branch. The history is described in the curly brackets following a tip or internal node of the tree in a tip to root encoding. For example, from the tip node, Taxon2, backward in time to its ancestor the mutational history along this branch is described as {T,0.1;C,0.1}; from the tip to the ancestor a T is observed for a length of 0.1 followed by a C with a length of 0.1 terminating in this state.
Significance is assigned using predictive pvalues which can be selected to test hypotheses about the number of synonymous/nonsynonymous changes, nucleotide character association (correlation), and morphological character association. The user can customize the design of the predictive test by controlling the number of replicates, which trees, model parameters, and prior values are used.
SIMMAP provides the user the ability to place constraints on a number of aspects of the analysis; the user can 1) fix ancestral states at individual nodes of a tree to a particular state or set of states, 2) constrain the analysis to particular trees by defining clade constraints, and 3) root trees using one or more outgroup species. In addition, SIMMAP will calculate the posterior probability of ancestral states using an empirical or hierarchical Bayesian approach.
Character correlation statistics
Often we would like to know whether two characters, or particular character states, covary on the phylogeny. For example, morphological studies addressing hypotheses regarding correlated evolution or ecological studies testing for associations between a character and a particular environment. Character histories can be used to address these questions using SIMMAP. A number of measures of correlation are implemented for nucleotide and morphological characters and their states.
Statistics for measuring morphological character and state associations, first described by Huelsenbeck et al. [16], have been implemented in SIMMAP to test for statebystate associations (eqn. 5) and overall character correlation (eqn. 6):
where, ${a}_{ij}^{(o)}$ is the observed association between character state i and j, ${a}_{ij}^{(e)}$ is the expected association, n is the number of states for character 1 and m is the number of states for character 2. The association between one state and another is the frequency of occurrence of state i and state j on the phylogeny.
When analyzing nucleotide data the following statistics have been implemented for the overall correlation (7) and statebystate correlations (8):
where, C, is a positive constant representing Yate's correction term for continuity (C = 0.5).
In addition, SIMMAP implements a statistic similar in form to the mutual information content statistic (MIC) for both nucleotide and morphological data types. As implemented in SIMMAP, this statistic evaluates the correlation between character histories along the phylogeny for two characters. This statistic takes the following form for statebystate correlations,
where f_{ ij }is the fraction of time state i is associated with j in a character history, and f_{ i }(f_{ j }) is the fraction time in a particular state independent of associations. By averaging over all state associations we get the following statistic for the overall character correlation:
Regardless of the statistic used significance is determined by sampling from the posterior predictive distribution of the statistic to form a null distribution of no character (or state) association. For example, predictive pvalues for the M statistic would be calculated in the following way,
where N is the number of realizations. In practice, the expectations of the statistics are used to summarize histories over trees, model parameters, and, if applicable, priors.
Documentation and help
Finally, a detailed Help Manual is provide in three formats: integrated with the program through Apple help, HTML documentation included with the electronic distribution, or on the web [30]. Users can browse help topics by aspects of the interface (e.g., windows) or follow a brief tutorial to give users a quick start to performing mapping analysis with SIMMAP. In addition, a section of the documentation provides a brief description of the methodology of sampling stochastic character histories and a list of other relevant publications.
Conclusion
SIMMAP provides a needed tool for mapping character histories on phylogenies that is not dependent on the parsimony method. Using a Bayesian approach, the application described here enables researchers to address a wide variety of questions important in evolutionary studies. In addition, SIMMAP can be used as a teaching tool for explaining stochastic models, Bayesian inference, and character histories.
Availability and requirements
Program name: SIMMAP
Current Version: 1.0 Beta 2.0.4
Program home page: http://www.simmap.com
Operating System: Apple Macintosh OS X 10.3 or greater
Programming language: C, ObjectiveC, Cocoa Frameworks
License: SIMMAP Free Academic Enduser License
Any restrictions to use by nonacademics: License required. Consult the documentation in the software distribution.
Abbreviations
 MCMC:

Markov chain Monte Carlo
 Q matrix:

A rate matrix describing the instantaneous rates of changing from one state to another for a continuoustime Markov model.
 JC69:

JukesCantor substitution model described in 1969 [19]. Assumes equal probabilities of change between states.
References
 1.
Felsenstein J: Phylogenies and the comparative method. American Naturalist 1985, 125: 1–15. 10.1086/284325
 2.
Harvey PH, Pagel MD: The Comparative Method in Evolutionary Biology. Oxford University Press; 1991.
 3.
Brooks DR, McLennan DA: Phylogeny, Ecology, and Behavior: A Research Program in Comparative Biology. University of Chicago Press; 1991.
 4.
Messier W, Stewart CB: Episodic adaptive evolution of primate lysomzymes. Nature 1997, 385: 151–154. 10.1038/385151a0
 5.
Bishop JG, Dean AM, MitchellOlds T: Rapid evolution of plant chitinases: molecular targets of selection in plantpathogen coevolution. Proceedings of the National Academy of Science USA 2000, 97: 5322–5327. 10.1073/pnas.97.10.5322
 6.
Langley CH, Fitch WM: An estimation of the constancy of the rate of molecular evolution. J Mol Evol 1974, 3: 161–177. 10.1007/BF01797451
 7.
Gillespie J: The Causes of Molecular Evolution. Oxford University Press; 1991.
 8.
Templeton AR: Contingency tests of neutrality using intra/interspecific gene trees: the rejection of neutrality for the evolution of the cytochrome oxidase II gene in the hominoid primates. Genetics 1996, 144: 1263–1270.
 9.
Maddison WP, Maddison DR: MacClade: Analysis of Phylogeny and Character Evolution, version 3.0. Sinauer. 1992.
 10.
Maddison WP, Maddison DR: Mesquite: a modular system for evolutionary analysis, version 1.01. 2004.
 11.
Huelsenbeck JP, Rannala B, Masly JP: Accommodating phylogenetic uncertainty in evolutionary studies. Science 2000, 288: 2349–2350. 10.1126/science.288.5475.2349
 12.
Bollback JP, Huelsenbeck JP: Phylogeny, genome evolution, and host specificity of singlestranded RNA bacteriophage (Family Leviviridae). J Mol Evol 2001, 52: 117–128.
 13.
Pagel MD: Inferring the historical patterns of biological evolution. Nature 1999, 401: 877–884. 10.1038/44766
 14.
Nielsen R: Mutations as missing data: inferences on the ages and distributions of nonsynonymous and synonymous mutations. Genetics 2001, 159: 401–411.
 15.
Nielsen R: Mapping mutations on phylogenies. Syst Biol 2002, 51: 729–732. 10.1080/10635150290102393
 16.
Huelsenbeck JP, Nielsen R, Bollback JP: Stochastic mapping of morphological characters. Syst Biol 2003, 52: 131–158.
 17.
Gaut B, Lewis P: Success of maximum likelihood in the four taxon case. Mol Biol Evol 1995, 12: 152–162.
 18.
Lewis P, Holder M, Holsinger K: Polytomies and Bayesian phylogenetic inference. Syst Biol 2005, 54(2):241–253. [http://www.hubmed.org/display.cgi?uids=16012095] 10.1080/10635150590924208
 19.
Jukes T, Cantor C: Evolution of protein molecules. In Mammalian Protein Metabolism. Academic Press; 1969:21–132.
 20.
Anderson E, Bai Z, Bischof C, Blackford S, Demmel J, Dongarra J, Croz JD, Greenbaum A, Hammarling S, McKenney A, Sorensen D: LAPACK Users' Guide. 3rd edition. Society for Applied Mathematics (SIAM); 1999.
 21.
Felsenstein J: Evolutionary trees from DNA sequences: a maximum likelihood approach. J Mol Evol 1981, 17: 368–376. 10.1007/BF01734359
 22.
Huelsenbeck JP, Ronquist F: MRBAYES: Bayesian inference of phylogenetic trees. Bioinformatics Applications Note 2001, 17: 754–755.
 23.
Nielsen R, Huelsenbeck JP: Detecting positively selected amino acid sites using posterior predictive pvalues. In Pacific Symposium on Biocomputing, Proceedings. World Scientific, Singapore; 2001:576–588.
 24.
Bollback JP: Posterior mapping and predictive distributions. In Statistical Methods in Molecular Evolution. Edited by: Nielsen R. Springer Verlag New York, Inc. New York, USA; 2005:189–203.
 25.
Lanavé C, Preparata G, Saccone C, Serio G: A new method for calculating evolutionary substitution rates. J Mol Evol 1984, 20: 86–93. 10.1007/BF02101990
 26.
Yang Z: Maximum likelihood estimation of phylogeny from DNA sequences when substitution rates differ over sites. Mol Biol Evol 1993, 10: 1396–1401.
 27.
Swofford D, Olsen G, Waddell P, Hillis DM: Phylogenetic Inference. In Molecular Systematics. Sinauer Associates; 1996:407–511.
 28.
Lewis PO: A likelihood approach to estimating phylogeny from discrete morphological character data. Sys tematic Biology 2002, 50: 913–925. 10.1080/106351501753462876
 29.
Schultz TR, Churchill GA: The role of subjectivity in reconstructing ancestral character states: A Bayesian approach to unknown rates, states, and transformation asymmetries. Systematic Biology 1999, 48: 651–664. 10.1080/106351599260229
 30.
SIMMAP Software[http://www.simmap.com]
Acknowledgements
John Huelsenbeck, Fredrik Ronquist, Rasmus Nielsen, Paul Gardner, Andrea Betancourt, and Kelly Dyer who provided valuable comments on the manuscript, support during program development, and general discussion. Also, I would like to thank two anonymous reviewers for valuable comments. Software development was supported by grants from NSF (MCB0075404) to John Huelsenbeck, grants to Rasmus Nielsen from NIH and Danish FNU, and a grant to the author from the Danish FNU.
Author information
Rights and permissions
About this article
Cite this article
Bollback, J.P. SIMMAP: Stochastic character mapping of discrete traits on phylogenies. BMC Bioinformatics 7, 88 (2006) doi:10.1186/14712105788
Received
Accepted
Published
DOI
Keywords
 Posterior Distribution
 Branch Length
 Internal Node
 Ancestral State
 Conditional Likelihood