- Open Access
A restraint molecular dynamics and simulated annealing approach for protein homology modeling utilizing mean angles
BMC Bioinformatics volume 6, Article number: 91 (2005)
We have developed the program PERMOL for semi-automated homology modeling of proteins. It is based on restrained molecular dynamics using a simulated annealing protocol in torsion angle space. As main restraints defining the optimal local geometry of the structure weighted mean dihedral angles and their standard deviations are used which are calculated with an algorithm described earlier by Döker et al. (1999, BBRC, 257, 348–350). The overall long-range contacts are established via a small number of distance restraints between atoms involved in hydrogen bonds and backbone atoms of conserved residues. Employing the restraints generated by PERMOL three-dimensional structures are obtained using standard molecular dynamics programs such as DYANA or CNS.
To test this modeling approach it has been used for predicting the structure of the histidine-containing phosphocarrier protein HPr from E. coli and the structure of the human peroxisome proliferator activated receptor γ (Ppar γ). The divergence between the modeled HPr and the previously determined X-ray structure was comparable to the divergence between the X-ray structure and the published NMR structure. The modeled structure of Ppar γ was also very close to the previously solved X-ray structure with an RMSD of 0.262 nm for the backbone atoms.
In summary, we present a new method for homology modeling capable of producing high-quality structure models. An advantage of the method is that it can be used in combination with incomplete NMR data to obtain reasonable structure models in accordance with the experimental data.
Due to the enormous progress that has been made in genomics a large number of DNA sequences including many whole genomes have been published. The evaluation of these data must include the determination of the three-dimensional structures of the proteins encoded. Although the two experimental techniques capable of determining three-dimensional structures of proteins and other biomolecules at atomic resolution, namely nuclear magnetic resonance (NMR) and X-ray crystallography, have seen significant improvements the process of structure determination remains very time-consuming and difficult. Unless unexpected advances of these techniques will occur in future, it is obvious that for the majority of all the primary sequence data available three-dimensional structures cannot be obtained experimentally. Therefore, only computational approaches are capable of filling the gap between existing protein sequences and structures. Although considerable progress has been achieved in ab initio structural prediction strategies [1–3] they are in general still unreliable when atomic resolution is demanded. However, when structures of homologous proteins are available, the prediction of the three-dimensional structure of entire proteins and protein domains is rather successful. In light of the fact that the protein structures elucidated so far only show a remarkably limited number of folds it would be desirable to accelerate the structure determination process especially for proteins possessing a fold already known. According to the SCOP classification [4, 5] (release 1.65, 1 August 2003) 20619 protein structures stored in the Protein Data Bank share only 800 different folds. Comparison of different proteins with similar amino acid sequences showed that they quite often display very similar tertiary structures [6–9].
In the past several different homology modeling approaches were published which range from strongly interactive methods (model building) to fully automated methods (for reviews see e. g.  and ). Generally the starting point in these approaches is a search in structure databases such as the Protein Data Bank  or CATH  for all protein structures that are related to the target sequence and then to select those 3D structures that will be used as templates. For searching the structural databases one can employ pairwise sequence-sequence comparisons using for example programs such as FASTA  and BLAST . When increased search sensitivity or a larger number of homologs are demanded methods which are based on multiple sequence alignments prove to be particularly efficient. Such an algorithm is implemented in the program PSI-BLAST . An alternative strategy for homolog identification relies on so-called threading methods, which predict whether the target sequence adopts any of the known 3D folds. Threading methods should be useful in cases when no sequences can be found which are clearly related to the target .
When a list of related protein structures has been obtained the appropriate templates have to be chosen from these. In this procedure usually factors such as high overall sequence similarity between target and template sequences, quality of the template structure and conditions under which the template structure was obtained are taken into account. Then the selected templates have to be optimally aligned with the target sequence. Since the search methods mentioned above are usually optimized for detecting remote homologs they are not optimal for target-template alignment. A program often used for the latter type of alignments is CLUSTALX , which is also used within PERMOL.
Using the template-target alignment a variety of methods has been published for 3D model building. The group of methods which were developed first and are still frequently used were modeling by rigid body assembly [19–21]. Another group of methods use segment matching [22–25]. In the third, most recent group of methods spatial restraints obtained from the template structures are used in distance geometry calculations or energy optimization procedures to obtain the target model [26–31].
The PERMOL approach described presently also uses spatial restraints but in contrast to most other programs mainly dihedral angle restraints as opposed to restraints derived from inter-atomic distances are employed. These restraints enter molecular dynamics calculations in torsion angle space. In the following we will describe this method in more detail and mark differences to existing programs that have been published before.
In ab initio molecular dynamics (MD) simulations in addition to the applied force field only information about the amino acid sequence of the protein in study enters the calculations. While for small molecules such methods show results that are in very good agreement with the experimental data they mostly fail for more complex molecules. On the other hand restrained molecular dynamics calculations based on simulated annealing protocols are routinely and successfully used for the determination of solution NMR structures – in that case strong experimental information is available. Especially effective with regard to computational effort are calculations in torsion angle space as implemented in the programs DYANA  and CNS .
In this contribution we propose a method which combines the well-developed torsion angle dynamics calculations of DYANA or CNS with structural information extracted from three-dimensional structures of homologous proteins. This information is translated into conformational restraints. Local structural restraints are obtained by a weighted average of the backbone dihedral angles using an algorithm proposed by Döker et al.  These averaged dihedral angle restraints are usually well preserved within the local secondary structure elements and therefore are especially well suited for the modeling of these. The program MODELLER  for example also uses dihedral angle restraints in an optimization procedure but expresses them as so-called probability density functions which are derived from structural features in several families of homologous proteins. Global structural restraints are obtained from distance relations between carefully selected atoms of amino acids well separated in the primary structure. In contrast to other programs the distance restraints are mainly used for the global arrangement of the secondary structure elements which are defined by the dihedral angle restraints. The efficient structure calculations performed with DYANA or CNS allow calculating a large number of structural models in a relatively short amount of time. From the resulting ensemble of structures the best in terms of the DYANA target function or total energy (CNS) can be selected for further analysis. As has also been shown in NMR spectroscopy, it is useful to describe the target structure by an ensemble of model structures.
It should be noted that the PERMOL approach described here is related to the method detailed by Zhang et al. , which uses a combination of torsion angle dynamics and dihedral angle and distance restraints to predict the fold of helical proteins. In contrast to PERMOL the program from Zhang et al. uses methods for secondary structure and contact prediction to derive spatial restraints.
To benchmark the PERMOL approach we used it to determine a homology structure for the histidine-containing phosphocarrier protein (HPr) from E. coli of which the structure has been solved experimentally both by NMR  (PDB entry: 1HDN) and X-ray crystallography  (1POH). The homology model was compared to the target structures and to a homology model calculated with the program MODELLER . To also investigate the performance of PERMOL on larger proteins that contain substantial disordered loop regions the human peroxisome proliferator activated receptor γ (Ppar γ) was used as a test case. Its structure has been determined previously by X-ray crystallography  (3PRG).
Theoretical considerations and general strategy
In standard NMR structure determination the principal physical model of a protein is represented by empirical potentials determining the general geometry. The fast optimization is obtained by a simulated annealing protocol and the correct conformations are selected from the generally accessible conformational space by the experimental restraints which are transformed into pseudo-potentials. In the approach used in PERMOL the experimental restraints are replaced by restraints derived from three-dimensional structures of homologous proteins. Local conformations are optimally encoded by the distribution of the corresponding torsion angles. The overall fold is determined by distance relations since even small errors in dihedral angles can add up to very large distance errors between amino acids that are separated by several positions in the sequence.
The use of a molecular dynamics and simulated annealing protocol for homology modeling allows to encode the features of the statistical distribution of a given parameter αi individually for each group of restraints. To this end not only the expectation values are calculated from the homologous structures j (j = 1,..,N i ) but also the upper and lower limits, and . It is still under discussion in the NMR community how exactly the upper and lower limits of restraints have to be defined but it is clear that they are related to the expected error of a given, individual parameter. A generally accepted definition is not available yet. In addition the form of the pseudo-energy function used in the calculations has to depend on the error distribution of the given parameter (see e. g. ).
The homology modeling procedure proposed here comprises the following steps: step 1, selection of data and sequence alignment, step 2, selection of restraints, and step 3, the restrained molecular dynamics simulation. These conceptually different steps in the calculation are reflected in the implementation of PERMOL in corresponding levels of the modeling procedure.
Level 1 – Selection of data and sequence alignment
Initially, one or several structures of homologous proteins are selected as templates. Their amino acid sequences are aligned to the sequence of the target protein using the program CLUSTALX . The resulting alignment is written to a text file and can be edited by the user. Conserved amino acids are characterized and classified for manual or automated selection of restraints. Based on the degree of sequence conservation in the different proteins a homology score value vi is calculated for each residue. The score values vi range from 1.0 for a completely conserved residue to 0.1 for a residue, which in the template proteins has been replaced in a non-conservative manner, e.g. a hydrophobic residue replaced by a charged one.
Level 2 – Selection of restraints
For the calculation of dihedral angle restraints usually only Φ and Ψ angles are taken into account but the ω-angle can be included as well. Structural restraints are only derived from residues, which have been selected. Additional residues can be selected either manually or automatically based upon the score value vi. Expectation values and standard deviations are calculated as described in the 'Methods' section with set to 1/ when structures are found in the pdb-file k as it is often the case for NMR-structures. Upper and lower limits for the dihedral angle restraints can be calculated either as the mean value plus/minus multiples of the standard deviations, <αi> ± b* <si> with a user defined constant b, or as the mean angle plus/minus a constant value. An additional weighting of the individual restraints can be performed on the basis of the score value vi which modifies the force constant of the restraint i in the MD calculation.
By default, distance restraints are automatically computed between the NH atoms of completely conserved amino acids. Restraints can also be generated for additional amino acids and atom types by appropriate selection. For the generation of distance restraints similar options are possible as for dihedral angle restraints. In addition, an upper distance limit for the pairs of atoms to be considered can be defined.
Conserved hydrogen bonds can also be used to generate distance restraints between the atoms involved in forming the bond. The criteria for selecting hydrogen bonds in the homologous protein structures can be modified by the user. By default, only hydrogen bonds are considered for which the N-O distance does not exceed 0.24 nm and the angle between the NH-HN and the C = O bond vectors does not deviate by more than 35° from 180°. Again, different options are possible for the calculation of the upper and lower limits. Hydrogen bonds which occur only in a few structures or are assigned to more than one pair of atoms, e.g. due to deviations between the different homologous proteins used as templates, can be automatically removed by corresponding filter functions.
Level 3 – Restrained molecular dynamics simulation
The restraint files generated by PERMOL can be directly used by the molecular dynamics programs DYANA and CNS. Standard simulated annealing protocols are employed.
Modeling of HPr from E. coli and of human Ppar γ
To test the modeling approach described in this paper we determined a homology structure for the histidine-containing phosphocarrier protein (HPr) from E. coli. HPr is an integral part of the bacterial phosphoenolpyruvate dependent phosphotransferase system (PTS) which efficiently catalyses phosphorylation and the import of carbohydrates into prokaryotic cells . HPr molecules from different organisms have been extensively studied and many 3D structures have been elucidated. In particular the structure of HPr from E. coli has been solved both by NMR  (PDB entry: 1HDN) and X-ray crystallography  (1POH) and is thus especially suited to test our modeling strategy (see Table 1).
Four previously determined HPr structures from four different organisms have been used as model structures (PDB codes 1PTF, 1QFR, 1QR5, and 2HID). An overview of these structures is given in Table 1. Only 21 % of the amino acid sequence is strictly conserved between the HPr proteins of E. coli, S. faecalis, E. faecalis, S. carnosus, and B. subtilis (18 out of 85 residues). Spatial restraints for the structure calculation were generated as detailed in the 'Methods' section. For the derivation of inter-atomic distance restraints only residues which are completely conserved or display conservative amino acid exchanges (e. g. one hydrophobic residue replaced by another one) were considered. Upper and lower limits for these distances were determined as the mean distance value plus or minus the standard deviation, respectively. Restraints for the backbone dihedral angles Φ and Ψ were calculated for all residues and have been weighted according to the homology score value vi. Upper and lower limits were determined as for the distance restraints. Hydrogen bonds were analyzed using the default parameter values. Distance restraints between the corresponding HN and O atoms were computed as the mean distance value plus or minus the standard deviation. A summary of these restraints is presented in Table 3.
Based on these restraints an ensemble of homology structures was computed using the molecular dynamics program DYANA [B32] with the standard simulated annealing protocol. Out of 200 structures calculated, the group of the ten structures with the lowest pseudo-energies was further analyzed. These ten models showed a good convergence with a RMSD value for the backbone atom positions of 0.041 nm (Fig. 1, Table 5). They displayed the well-known secondary structure elements common to all HPr molecules studied so far, comprising a four-stranded antiparallel β-sheet and three α-helices designated as helices a, b, and c. Analysis of the ensemble of these ten structures with PROCHECK-NMR  showed that all backbone dihedral angles fell into the most favored and additionally allowed regions of the Ramachandran plot (Table 5). Modeling experiments where the dihedral angle restraints have been partly or completely left out from the structure calculations of the model structures underlined their importance in defining the correct secondary structure and local conformations (see below).
In order to further test our modeling strategy we set out to derive a homology structure for the human peroxisome proliferator activated receptor γ (Ppar γ). Ppar γ is considerably larger than HPr and comprises about 280 amino acid residues. Further, it contains larger relatively unstructured loop regions and it is worthwhile to investigate how PERMOL performs here. In addition this molecule is of particular importance for us since we are currently in the process of experimentally solving its solution structure. Via a BLAST  search for the primary sequence of Ppar γ we identified several related proteins for which three-dimensional structures are available (Table 2), namely Ppar α [42–44] (PDB codes: 1K7L, 1KKQ, and 1I7G) and Ppar δ  (1GWX and 3GWX).
Model structures were calculated as detailed for HPr and out of 125 calculated structures the 16 structures with the lowest pseudo energies were further analyzed. A summary of the used restraints is given in Table 4. These sixteen models showed a good convergence with a RMSD value for the backbone atom positions of 0.135 nm (residues 206 – 477) (Fig. 2, Table 6). The secondary structure elements observed in the model structures agree well with the corresponding X-ray structure of the template protein, comprising a four-stranded antiparallel β-sheet and twelve α-helices (Fig. 2). Analysis of the ensemble of the selected sixteen structures with PROCHECK-NMR  showed that almost all backbone dihedral angles fell into the most favored and additionally allowed regions of the Ramachandran plot (Table 6).
Comparison to target structures
The ensemble of modeled HPr structures was compared to the target structure of HPr from E. coli which before had been elucidated using NMR spectroscopy (1HDN) and X-ray crystallography (1POH). For 1HDN a bundle of 30 structures was deposited in the protein database. As stated in the header of the coordinate file the first structure is closest to the ensemble average. As a consequence this structure was selected as the NMR target structure. A comparison between the modeled structure and the target NMR and X-ray structures is shown in Fig. 3. The homology model displayed the same global fold and distribution of secondary structure elements as both target structures. To quantify the agreement between the individual structures the root mean square deviations (RMSD) between the different structures were calculated for the backbone atom positions. While the RMSD between the two target structures 1HDN and 1POH amounted to 0.11 nm the comparison of the best modeled structure with the target NMR structure and the X-ray structure yielded RMSD values of 0.17 nm and 0.15 nm, respectively. Although the agreement between the modeled and the target structures was worse than the agreement between the two target structures, the RMSD values were of similar magnitude. Deviations between the homology model and the experimentally determined structures were mainly seen in the loop regions and in the orientation of helices a and b. Interestingly, these are also the regions that are least well defined in the X-ray and NMR structures and where these structures diverge most. In contrast, the core region of HPr and its overall fold are reproduced well in the homology model.
Further, we used R-factor analysis  to compare the modeled structure to the target structures. The quality of the protein backbone was specifically assessed by only taking into account spectral signals arising from backbone protons. Low R-factors of similar magnitude were obtained when comparing the modeled structure with either the NMR target structure (R-factor 0.093) or the X-ray target structure (0.076). Consistent with the RMSD values the R-factors also indicated that the homology structure more closely resembled the X-ray structure than the NMR structure. A slightly lower R-factor of 0.073 was obtained when comparing the two target structures with each other (Table 7).
For Ppar γ the best model structure in terms of pseudo-energy was compared to the target X-ray structure (3PRG). The agreement between the two structures was assessed by calculating the corresponding RMSD value for the backbone atoms, which amounted to 0.262 nm (Table 8). Note that the first five unstructured residues and the region between residues 262 and 274 which were missing in the X-ray target structure were not considered in this analysis. Deviations between the homology model and the X-ray structure were mainly seen in the loop regions and in the orientation of the helices preceding and following the unstructured region between residues 262 and 274. The agreement between model and X-ray structure was further analyzed by the calculation of pseudo NMR R-factors (Table 8). Although somewhat higher R-factors were obtained for Ppar γ than for HPr, the R-factor analysis still showed a reasonable agreement between model and X-ray structure.
Importance of torsion angles
In principle, torsion angles can completely define the 3D-structure of a protein when the general geometry of the amino acids is predefined. However, small errors of torsion angles in the backbone propagate and lead to large errors in the Cartesian space for amino acids remote in the sequence. Nevertheless, torsion angles are optimal predictors for local folding. Fig. 4 exemplifies the importance of the torsion angles for the structure predictions. As an example it shows a structure prediction (calculation) of HPr from S. faecalis from a rather small number of restraints created from the X-ray structure (1PTF) of the protein. Only 427 torsion angle restraints together with 41 hydrogen bond restraints can be sufficient to determine the various secondary structure elements together with the global fold of the molecule. Even the loop regions for which no hydrogen bond restraints are present adopt native-like conformations. Only the third α-helix is rotated away from the core of the protein since its orientation is solely defined by the angle restraints of residues 67–69.
In this contribution we have presented a new program for homology modeling of protein structures. Using restraint molecular dynamics simulations together with spatial restraints derived from template structures we calculated homology structures of HPr from E. coli and of human Ppar γ. An advantage of the proposed method is the use of spatial restraints with individual upper and lower limits depending on the local structural conservation in the template structures. This becomes especially evident for the obtained bundle of Ppar γ model structures where one can easily distinguish between the mostly well-defined secondary structure elements and less ordered regions e.g. some of the larger loop regions.
At first glance it appears to be a disadvantage of the proposed method that not a unique, seemingly perfect structure is the result of the calculations as in the case of threading methods. However, the structure bundle produced by our approach gives an idea of the conformational subspace determined by the available experimental basis and the physical model. This is a safeguard against typical over-interpretations of model structures where data in badly predictable regions are used for the detailed interpretation of functional data or are used during the drug design process.
An additional advantage of the simulated annealing approach is that restraint violations are not treated explicitly but contribute to the overall "energy" which is minimized. In contrast to other methods in the approach used in PERMOL the mean torsion angles and their errors provide the main information. A few distance restraints are used to define the long-range relations which cannot be described sufficiently well by the local data. Accordingly, details of the selection of these restraints are not critical. Thus, the selection of pairwise restraints between all conserved residues seems to be plausible. The same is true for conserved hydrogen bonds. However, the PERMOL software also allows to define a custom selection of restraints and thus an adaptation to specific needs. As an example all hydrophobic contacts between amino acid residues observed in the template structures could be selected to serve as restraints. The automated calculation of individual weighting factors during the calculation of the expectation values and standard errors of the individual restraints would permit to introduce information about the local and global sequence conservation and the precision of the used structures. Currently, we are undertaking efforts to address this question. The high quality of the structure models generated with PERMOL illustrates that the same MD programs used for the determination of NMR structures can also be utilized for homology modeling. The programs and strategies developed for NMR structure determination have evolved to efficient optimizers even when only limited information (i. e. small number of structural restraints) is available. This has been recognized for example by Dominguez et al.  who use restrained molecular dynamics together with the ARIA protocol  for solving the docking problem. While in the case of NMR structure determination the restraints that enter the molecular dynamics simulation are derived from experimental observables like NOE cross-peaks, J- couplings, and residual dipolar couplings, in the case of homology modeling synthetic restraints are generated from previously determined structures of homologous template proteins. The use of standard MD programs and protocols also has a disadvantage since it is not possible to directly introduce properties in the calculation which are not provided for by the programs. An example would be the use of specific potential forms with multiple minima which describe the homology-derived information in more detail as it is done e. g. by MODELLER .
We compared the HPr homology structure we obtained with PERMOL to a structural model of HPr from E. coli calculated using MODELLER (version 6v2). When the same alignment file and template structures were used, homology models of similar quality were obtained with the two programs.
A specific advantage of the approach presented here is that it can be well used in the context of standard structure determination by NMR. The restraint files generated by PERMOL are editable and can be easily combined with other data and be adapted for use with different programs. As the same MD programs are used both for modeling with PERMOL and for NMR structure determination, incomplete experimental data can be conveniently combined with spatial restraints derived from homologous template proteins. The validity of the resulting structure models can be checked by calculating NMR R-factors . Different force fields and annealing protocols which are available for the NMR MD programs can also be utilized for homology modeling. In this way recent advances like the structure refinement in explicit solvent [49, 50] can be readily exploited to derive more accurate homology structures.
In summary, we have presented a new method for homology modeling capable of producing high-quality structure models. Compared to many other homology structure prediction programs it is based on a different philosophy since its aim is not to predict a unique best structure but a bundle of structures representing the locally different degrees of reliability of the structure prediction. Since the homology-derived restraints are mainly used to reduce the conformational space to be searched by the MD calculation, their relative importance for obtaining a correct homology model is expected to decrease in future time as the physical model employed in these calculations is improved. Another advantage of the approach described here is its flexibility, conveniently allowing several template structures to be included as sources of structural restraints. Furthermore, the PERMOL software permits to determine which kinds of structural restraints enter the molecular dynamics calculation in a controlled fashion. We demonstrated that the standard MD programs used in the course of structure determination by NMR can also be well utilized for the purpose of homology modeling. Prediction on the basis of averaged torsion angles is a powerful tool which efficiently makes use of the structural information available in the protein data base and leads to well-defined structures.
Recently, a homology model determined with PERMOL was used in the resonance assignment  and structure determination process of a mutant form of HPr from S. carnosus  and to obtain an initial estimate for the molecular alignment tensor describing the partial orientation of the HPr molecule in anisotropic solution [53, 54]. PERMOL has also been integrated in the NMR structure determination package AUREMOL . In this molecule-centered top-down approach one starts with a trial structure e.g. a homology model obtained by PERMOL that is iteratively refined until it fits the experimental data sufficiently as verified by the calculation of NMR R-factors.
Calculation of the restraints for simulated annealing
Structural information obtained from a set of homologous structures j (j = 1,..,Ni) must be expressed in form of restraints. The restraint of a parameter αi is usually defined by its expectation value and the upper and lower limits and , respectively. PERMOL offers several ways to calculate these quantities from the expectation values observed in the template proteins <αi> and the corresponding standard deviations si. For non-cyclic parameters <αi> and si can be simply calculated according to eqs. (1) and (2).
with the weighting factor
for a given event i and the total number of events Ni. For cyclic parameters like dihedral angles, which are mainly used within PERMOL such a definition does not directly apply but can be extended by the approach described by Döker et al. (1999) .
Here, the origin of the coordinate system is shifted to fulfill the condition
and the standard deviation is calculated according to eq. (2). The expectation value
is obtained by
determine the statistical weight of a given homology structure used to calculate a restraint. In principle, their value will depend on factors such as the local and global sequence conservation and the quality of a structure, e. g. when comparing X-ray and NMR-structures.
In order to facilitate the determination of structural restraints for homology modeling the software package PERMOL was developed. PERMOL was written in Perl/Tk and has been tested with the operating systems SGI IRIX, Linux and Windows. The software and a detailed manual explaining its use can be obtained free of charge from the authors http://www.biologie.uni-regensburg.de/Biophysik/Kalbitzer/index_1.html. Sequence alignment is done by using the program CLUSTALX . Structure calculations are performed with output data files generated by PERMOL which can be imported by the molecular dynamics programs DYANA  and CNS . Dihedral angles from different structures are averaged following the algorithm described by Döker et al. . The typical computing time for setting up the restraint and parameter files for the MD-calculation is negligible using a modern PC. The calculation of the structures strongly depends on the MD-program used, the number of structures calculated and the actual simulated annealing protocol. In the examples presented here structures were calculated on a standard Linux-PC using the MD program DYANA. The corresponding calculation times for a single structure model were around 30 and 160 seconds for HPr and Ppar γ, respectively. Figures 1, 2, 3, and 4 have been prepared with MOLMOL and rendered with PovRay http://www.povray.org.
Validation of homology models
Modeled structures can be quantitatively compared to their respective target structures by calculating NMR R-factors according to . Analogous to crystallography R-factors, NMR R-factors are used to quantify how well a three-dimensional structure accounts for the spectral signals occurring in an experimental NMR spectrum. Using an implementation of the complete relaxation matrix analysis (RELAX, [56, 57]) artificial NMR spectra are calculated for the given three-dimensional structure and compared to the experimental spectra. R-factors quantify the deviations between the two types of spectra and are therefore a measure for the quality of the trial structure. In the case of perfectly matching spectra the R-factor adopts a value of 0. Analogous, R-factor analysis can also be employed to quantify the agreement between two protein structures. In that case artificial NMR spectra are calculated for both structures and are compared to each other.
The agreement between two structures can be further assessed by determining the root mean square deviations (RMSD) between the atom positions of the structures. The program MOLMOL  is used to fit the structures atop of each other and to calculate RMSD values. The stereo-chemical quality of the obtained models was validated using the program PROCHECK-NMR .
histidine-containing phosphocarrier protein
nuclear magnetic resonance
nuclear Overhauser effect
Protein Data Bank Brookhaven
- Ppar γ:
human peroxisome proliferator activated receptor γ
phosphoenolpyruvate carbohydrate phosphotransferase system
root mean square deviation
Baker D: A surprising simplicity to protein folding. Nature 2000, 405: 39–42. 10.1038/35011000
Bonneau R, Baker D: Ab initio protein structure prediction: progress and prospects. Annu Rev Biophys Biomol Struct 2001, 30: 173–189. 10.1146/annurev.biophys.30.1.173
Hardin C, Pogorelov TV, Luthey-Schulten Z: Ab initio protein structure prediction. Curr Opin Struct Biol 2002, 12: 176–181. 10.1016/S0959-440X(02)00306-8
Murzin AG, Brenner SE, Hubbard TJP, Chothia C: SCOP: a structural classification of proteins database for the investigation of sequences and structures. J Mol Biol 1995, 247: 536–540. 10.1006/jmbi.1995.0159
Lo Conte L, Brenner SE, Hubbard TJP, Chothia C, Murzin AG: SCOP database in 2002: refinements accommodate structural genomics. Nucleic Acids Res 2002, 30: 264–267. 10.1093/nar/30.1.264
Chothia C, Lesk AM: The relation between the divergence of sequence and structure in proteins. EMBO J 1986, 5: 823–826.
Sander C, Schneider R: Database of homology-derived protein structures and the structural meaning of sequence alignment. Proteins 1991, 9: 56–68.
Martin ACR, MacArthur MW, Thornton JM: Assessment of comparative modeling in CASP2. Proteins 1997, Suppl 1: 14–28. Publisher Full Text 10.1002/(SICI)1097-0134(1997)1+<14::AID-PROT4>3.0.CO;2-O
Vitkup D, Melamund E, Moult J, Sander C: Completeness in structural genomics. Nat Struct Biol 2001, 8: 559–566. 10.1038/88640
Martin-Renom M, Stuart RC, Fiser A, Sanchez R, Melo F, Sali A: Comparitive Protein Structure Modeling of Genes and Genomes. Annu Rev Biophys Biomol Struct 2000, 29: 291–325. 10.1146/annurev.biophys.29.1.291
Al-Lazikani B, Jung J, Xiang Z, Honig B: Protein structure prediction. Curr Opin Chem Biol 2001, 5: 51–56. 10.1016/S1367-5931(00)00164-2
Westbrook J, Feng Z, Chen L, Yang H, Berman HM: The Protein Data Bank and structural genomics. Nucleic Acids Res 2003, 31: 489–491. 10.1093/nar/gkg068
Orengo CA, Bray JE, Buchan DW, Harrison A, Lee D, Pearl FM, et al.: The CATH protein family database: A resource for structural and functional annotation of genomes. Proteomics 2002, 2: 11–21. 10.1002/1615-9861(200201)2:1<11::AID-PROT11>3.3.CO;2-K
Pearson WR: Comparison of methods for searching protein sequence databases. Protein Sci 1995, 4: 1145–1160.
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ: Basic local alignmnet search tool. J Mol Biol 1990, 215: 403–410. 10.1006/jmbi.1990.9999
Altschul SF, Madden TL, Schaffer AA, Zhang J, Zhang Z, Miller W, et al.: Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucleic Acids Res 1997, 25: 3389–3402. 10.1093/nar/25.17.3389
David R, Korenberg MJ, Hunter IW: 3D-1D threading methods for protein fold recognition. Pharmacogenomics 2000, 1: 445–455. 10.1517/14622418.104.22.1685
Thompson JD, Gibson TJ, Plewniak F, Jeanmougin F, Higgins DG: The CLUSTAL_X windows interface: flexible strategies for multiple sequence alignment aided by quality analysis tools. Nucleic Acids Res 1997, 25: 4876–4882. 10.1093/nar/25.24.4876
Browne WJ, North ACT, Phillips DC, Brew K, Vanaman TC, Hill RC: A possible three-dimensional structure of bovine lactalbumin based on that of hen's egg-white lysosyme. J Mol Biol 1969, 42: 65–86. 10.1016/0022-2836(69)90487-2
Blundell TL, Sibanda BL, Sternberg MJ, Thornton JM: Knowledge-based prediction of protein structures and the design of novel molecules. Nature 1987, 326: 347–352. 10.1038/326347a0
Greer J: Comparative modeling methods: application to the family of the mammalian serine proteases. Proteins 1990, 7: 317–334.
Jones TA, Thirup S: Using known substructures in protein model building and crystallography. EMBO J 1986, 5: 819–822.
Unger R, Harel D, Wherland S, Sussman JL: A 3D building blocks approach to analyzing and predicting structure of proteins. Proteins 1989, 5: 355–373.
Claessens M, Van Cutsem C, Lasters I, Wodak S: Modelling the polypeptide backbone with 'spare parts' from known protein structures. Protein Eng 1989, 2: 335–345.
Levitt M: Accurate modeling of protein conformation by automatic segment matching. J Mol Biol 1992, 226: 507–533. 10.1016/0022-2836(92)90964-L
Havel TF, Snow ME: A new method for building protein conformations from sequence alignments with homologues of known structure. J Mol Biol 1991, 217: 7. 10.1016/0022-2836(91)90603-4
Srinivasan S, March CJ, Sudarsanam S: An automated method for modeling proteins on known templates using distance geometry. Prot Sci 1993, 2: 277–289.
Sali A, Blundell TL: Comparitive protein modelling by satisfaction of spatial restraints. J Mol Biol 1993, 234: 779–815. 10.1006/jmbi.1993.1626
Brocklehurst SM, Perham RN: Prediction of the three-dimensional structures of the biotinylated domain from yeast pyruvate carboxylase and the of the lipoylated H-protein from the pea leaf glycine cleavage system: a new automated method for the prediction of protein tertiary structure. Prot Sci 1993, 2: 626–639.
Aszodi A, Taylor WR: Homology modelling by distance geometry. Fold Des 1996, 1: 325–334.
Kolinski A, Betancourt MR, Kihara D, Rotkiewicz P, Skolnick J: Generalized comparitive modeling (GENECOMP): A combination of sequence comparison, threading, and lattice modeling for protein structure prediction and refinement. Proteins 2001, 44: 133–149. 10.1002/prot.1080
Güntert P, Mumenthaler C, Wüthrich K: Torsion Angle Dynamics for NMR Structure Calculation with the New Program DYANA. J Mol Biol 1997, 273: 283–298. 10.1006/jmbi.1997.1284
Brünger AT, Adams PD, Clore GM, DeLano WL, Gros P, Grossekunstleve RW, et al.: Crystallography & NMR System: A New Software Suite for Macromolecular Structure Determination. Acta Cryst 1998, D54: 905–921.
Döker R, Maurer T, Kremer W, Neidig K-P, Kalbitzer HR: Determination of Mean and Standard Deviation of Dihedral Angles. BBRC 1999, 257: 348–350.
Zhang C, Hou J, Kim S-H: Fold prediction of helical proteins using torsion angle dynamics and predicted restraints. Proc Natl Acad Sci U S A 2002, 99: 3581–3585. 10.1073/pnas.052003799
van Nuland NAJ, Hangyi IW, van Schaik RC, Berendsen HJ, van Gunsteren WF, Scheek RM, et al.: The High-resolution Structure of the Histidine-containing Phosphocarrier Protein HPr from Escherichia coli Determined by Restrained Molecular Dynamics from Nuclear Magnetic Resonance Nuclear Overhauser Effect Data. J Mol Biol 1994, 237: 544–559. 10.1006/jmbi.1994.1254
Jia Z, Quail JW, Waygood EB, Delbaere LT: The 2.0-A resolution structure of Escherichia coli histidine-containing phosphocarrier protein HPr. A redetermination. J Biol Chem 1993, 268: 22490–22501.
Uppenberg J, Svensson C, Jaki M, Bertilsson G, Jendeberg L, Berkenstam A: Crystal Structure of the Ligand Binding Domain of the Human Nuclear Receptor Ppargamma. J Biol Chem 1998, 273: 31108–31112. 10.1074/jbc.273.47.31108
Gronwald W, Kalbitzer HR: Automated structure determination of proteins by NMR spectroscopy. Prog NMR Spectrosc 2004, 44: 33–96. 10.1016/j.pnmrs.2003.12.002
Postma PW, Lengeler JW, Jacobson GR: Phosphoenolpyruvate:carbohydrate phosphotransferase systems of bacteria. Microbiol Rev 1993, 57: 543–594.
Laskowski RA, Rullmann JAC, MacArthur MW, Kaptein R, Thornton JM: AQUA and PROCHECK-NMR Programs for checking the quality of protein structures solved by NMR. J Biomol NMR 1996, 8: 477–486. 10.1007/BF00228148
Xu HE, Lambert MH, Montana VG, Plunket KD, Moore LB, Collins JL, et al.: Structural determinants of ligand binding selectivity between the peroxisome proliferator-activated receptors. Proc Natl Acad Sci U S A 2001, 98: 13919–13924. 10.1073/pnas.241410198
Xu HE, Stanley TB, Montana VG, Lambert MH, Shearer BG, Cobb JE, et al.: Structural basis for antagonist-mediated recruitment of nuclear co-repressors by PPARalpha. Nature 2002, 415: 813–817.
Cronet P, Petersen JFW, Folmer R, Blomberg N, Sjoblom K, Karlsson U, et al.: Structure of the PPARalpha and -gamma ligand binding domain in complex with AZ 242; ligand selectivity and agonist activation in the PPAR family. Structure 2001, 9: 699–706. 10.1016/S0969-2126(01)00634-7
Xu HE, Lambert MH, Montana VG, Parks DJ, Blanchard SG, Brown PJ, et al.: Molecular recognition of fatty acids by peroxisome proliferator-activated receptors. Mol Cell 1999, 3: 397–403. 10.1016/S1097-2765(00)80467-0
Gronwald W, Kirchhofer R, Gorler A, Kremer W, Ganslmeier B, Neidig KP, et al.: RFAC, a program for automated NMR R-factor estimation. J Biomol NMR 2000, 17: 137–151. 10.1023/A:1008360715569
Dominguez C, Boelens R, Bonvin AMJJ: HADDOCK: A Protein-Protein Docking Approach Based on Biochemical or Biophysical Information. J Am Chem Soc 2003, 125: 1731–1737. 10.1021/ja026939x
Linge JP, Habeck M, Rieping W, Nilges M: ARIA: automated NOE assignment and NMR structure calculation. Bioinformatics 2003, 19: 315–316. 10.1093/bioinformatics/19.2.315
Linge JP, Williams MA, Spronk CAEM, Bonvin AMJJ, Nilges M: Refinement of protein structures in explicit solvent. Proteins 2003, 50: 496–506. 10.1002/prot.10299
Nabuurs SB, Nederveen AJ, Vranken W, Doreleijers JF, Bonvin AMJJ, Vuister GW, et al.: DRESS: a Database of REfined Solution NMR Structures. Proteins 2004, 55: 483–486. 10.1002/prot.20118
Gröger C, Möglich A, Pons M, Koch B, Hengstenberg W, Kalbitzer HR, et al.: NMR-Spectroscopic Mapping of an Engineered Cavity in the I14A Mutant of HPr from Staphylococcus carnosus Using Xenon. J Am Chem Soc 2003, 125: 8726–8727. 10.1021/ja030113t
Möglich A, Koch B, Gronwald W, Hengstenberg W, Brunner E, Kalbitzer HR: Solution structure of the active-centre mutant I14A of the histidine-containing phosphocarrier protein from Staphlococcus carnosus . Eur J Biochem 2004, 271: 4815–4824. 10.1111/j.1432-1033.2004.04447.x
Tjandra NL, Bax A: Direct Measurement of Distances and Angles in Biomolecules by NMR in a Dilute Liquid Crystalline Medium. Science 1997, 278: 1111–1114. 10.1126/science.278.5340.1111
Brunner E: Residual dipolar couplings in protein NMR. Concepts Magn Reson 2001, 13: 238–259. 10.1002/cmr.1012
Koradi R, Billeter M, Wüthrich K: MOLMOL: a program for display and analysis of macromolecular structures. J Mol Graphics 1996, 14: 51–55. 10.1016/0263-7855(96)00009-4
Görler A, Kalbitzer HR: Relax, a Flexible Program for the Back Calculation of NOESY Spectra Based on Complete-Relaxation-Matrix Formalism. J Magn Reson 1997, 124: 177–188. 10.1006/jmre.1996.1033
Görler A, Gronwald W, Neidig KP, Kalbitzer HR: Computer assisted assignment of 13C or 15N edited 3D-NOESY-HSQC spectra using back calculated and experimental spectra. J Magn Reson 1999, 137: 39–45. 10.1006/jmre.1998.1614
Jia Z, Vandonselaar M, Hengstenberg W, Quail JW, Delbaere LT: The 1.6 A structure of histidine-containing phosphotransfer protein HPr from Streptococcus faecalis. J Mol Biol 1994, 236: 1341–1355. 10.1016/0022-2836(94)90062-0
Maurer T, Döker R, Görler A, Hengstenberg W, Kalbitzer HR: Three-dimensional structure of the histidine containing phosphocarrier protein (HPr) from Enterococcus faecalis in solution. Eur J Biochem 2001, 268: 635–644. 10.1046/j.1432-1327.2001.01916.x
Görler A, Hengstenberg W, Kravanja M, Beneicke W, Maurer T, Kalbitzer HR: Solution Structure of the Histidine-Containing Phosphocarrier Protein from Staphylococcus carnosus . Appl Magn Reson 1999, 17: 465–480.
Jones BE, Rajagopal P, Klevit RE: Phosphorylation on histidine is accompanied by localized structural changes in the phosphocarrier protein, HPr from Bacillus subtilis. Protein Sci 1997, 6: 2107–2119.
The authors thank Dipl. Phys. K. Brunner, Dr. R. Döker, Dr. W. Kremer and Dipl. Phys. J. Trenner for helpful discussions. Financial support by the European Commission (SPINE-project) is gratefully acknowledged.
TM, WG, and HRK conceived the project. DW and TM performed initial feasibility studies and refined the overall modeling strategy. AM wrote the PERMOL software and a manual. AM, DW, and WG calculated the homology structures. AM drafted the manuscript. WG and HRK coordinated the study and wrote the manuscript. All authors read and approved the final manuscript.
Authors’ original submitted files for images
About this article
Cite this article
Möglich, A., Weinfurtner, D., Maurer, T. et al. A restraint molecular dynamics and simulated annealing approach for protein homology modeling utilizing mean angles. BMC Bioinformatics 6, 91 (2005). https://0-doi-org.brum.beds.ac.uk/10.1186/1471-2105-6-91
- Nuclear Magnetic Resonance
- Secondary Structure Element
- Distance Restraint
- Nuclear Magnetic Resonance Structure
- Root Mean Square Deviation