- Research article
- Open Access
Support Vector Machines for predicting protein structural class
BMC Bioinformatics volume 2, Article number: 3 (2001)
We apply a new machine learning method, the so-called Support Vector Machine method, to predict the protein structural class. Support Vector Machine method is performed based on the database derived from SCOP, in which protein domains are classified based on known structures and the evolutionary relationships and the principles that govern their 3-D structure.
High rates of both self-consistency and jackknife tests are obtained. The good results indicate that the structural class of a protein is considerably correlated with its amino acid composition.
It is expected that the Support Vector Machine method and the elegant component-coupled method, also named as the covariant discrimination algorithm, if complemented with each other, can provide a powerful computational tool for predicting the structural classes of proteins.
The observed results by Muskal and Kim  suggested that the structural class of a protein might basically depend on its amino acid composition. Many efforts [2,3,4,5,6,7,8,9,10,11,12,13,14] have been made to predict the structural class of a protein based on its amino acid composition. The physical mechanism about this kind of correlation has been discussed by Bahar et al.  and Chou . For a systematic description in this area, see a comprehensive review by Chou and Zhang  and an updated review . In this paper, we try to apply Vapnik's Support Vector Machine  to approach this problem. In this work. Support Vector Machine was performed based on the data sets constructed by Zhou  based on SCOP . In ref.19 the reason why these data sets are more reasonable has also been addressed. As a result, high rates of self-consistency and jackknife test were obtained. This has further confirmed that the structural class of a protein is considerably correlated with its amino acid composition.
Results and Discussion
Success rate of self-consistency of SVMs
In this research, the examination for the self-consistency of the SVM method was tested. The following two data sets from Zhou  are used. One consists of 277 domains, of which 70 all-α domains, 61 all-β domains, 81 α/β domains, and 65 α+β domains. The other data set consists of 498 domains, of which 107 are all-α domains, 126 all-β,136 α/β domains, and 129 α+β domains. All the rates of correct prediction for the four structural classes of both datasets reach 100%. These rates are "training" accuracy, indicating that after being trained, the SVM model has grasped the complicated relationship between the amino acid composition and protein structure.
Success rate of jackknife test of SVMs
We use jackknife test for cross-validation. The cross-validation by jackknifing is thought the most objective and rigorous way in comparison with sub-sampling test or independent dataset test [16, 21,22]. During the process of jackknife analysis, the datasets are actually open, and a protein will in turn move from each to the other. As a result, the overall rate of correct prediction for the four structural classes of 277 domains (the 1 st set) was 220/277 = 79.4%; while the rates of correct prediction for the four structural classes of 498 domains (the 2nd set) was 464/498 = 93.2%.
Comparison to neural network method and elegant component-coupled algorithm
Zhou  applied the elegant component-coupled algorithm developed by Chou et al. [11,12,13] to protein structure class prediction. Later Cai and Zhou  applied neural network method to the same problem. The comparison of their results to SVM method is given in Table 1 (for self-consistency test) and Table 2 (for jackknife test).
The comparison should be focused on the jackknife rates (Table 2) because it represents the rate obtained by following a more objective test procedure [21,22]. From Table 2 we can see that the rates of both the SVM and the component-coupled algorithm are higher than those of neural network. Although the rates obtained here by SVM are slightly higher than those by the component-coupled algorithm, it does not mean the predicted results by SVM are always better than those by the component-coupled algorithm. For some cases, the results obtained by the latter might be better than those by the former. Accordingly, it is expected, the SVM method and the component-coupled algorithm, if complemented with each other, will provide a powerful tool for predicting protein structural class.
The current study has further supported, from the approach of SVMs, the conclusion drawn by Chou and his co-workers [11,12,13] and Zhou  that if the coupling effect among different amino acid components can be properly taken into account, the prediction quality of protein structural classes can be significantly improved.
Materials and Methods
Support Vector Machine (SVM)
Support Vector Machine (SVM) is one kind of learning machine based on statistical learning theory. The basic idea of applying SVM to pattern classification can be stated briefly as follows. First, map the input vectors into one feature space (possible with a higher dimension), either linearly or non-linearly, which is relevant with the selection of the kernel function. Then, within the feature space from the first step, seek an optimized linear division, i.e. construct a hyperplane which separates two classes(this can be extended to multi-class). SVM training always seeks a global optimized solution and avoids over-fitting, so it has the ability to deal with a large number of features. A complete description to the theory of SVMs for pattern recognition is in Vapnik's book 
SVMs have been used in a wide range of problems including drug design , image recognition and text classification , microarray gene expression data analysis , and protein fold recognition .
In this paper, we apply Vapnik's Support Vector Machine  for the structural classes of proteins. We download the SVMIight, which is an implementation (in C Language) of SVM for the problem of pattern recognition. The optimization algorithm used in SVMIight can be found in [29,30]. The code has been used in text classification, image recognition , microarray gene expression data analysis  and protein fold recognition .
Suppose we are given a set of samples, i.e, a series of input vectors
with corresponding labels
Where -1 and +1 are used to stand respectively for the two classes. The goal here is to construct one binary classifier or derive one decision function from the available samples, which has small probability of misclassifying a future sample. Both the basic linear separable case and the most useful linear non-separable case for most real life problems are considered here:
The linear separable case
In this case, there exists a separating hyper plane whose function is
, which implies:
subject to this constraint, the SVM approach tries to find a unique separating hyperplane. Here is the Euclidean norm of which maximizes the distance between the hyper plane, i.e. Optimal Separating Hyperplane or OSH , and the nearest data points of each class. The classifier is called the largest margin classifier. By introducing Lagrange multipliers , the SVM training procedure amounts to solving a convex QP problem. The solution is a unique globally optimized result can be shown having the following expansion:
Only if the corresponding
> 0, these are called Support Vectors. When a SVM is trained, the decision function can be written as:
Where sgn() in the above formula is the given sign function.
The linear non-separable case
"soft margin" technique.
In order to allow for training errors, ref.31 introduced slack variables:
ξi > 0, i = 1, ..., N
And relaxed separation constraint is given as:
And the OSH can be found by minimizing
Where C is a regularization parameter used to decide a trade- off between the training error and the margin.
"kernel substitution" technique
SVM performs a nonlinear mapping of the input vector
from the input space into a higher dimensional Hilbert space, where the mapping is determined by the kernel function. Then like in case (i), it finds the OSH in the space H corresponding to a non-linear boundary in the input space. Two typical kernel functions are listed below:
And the form of the decision function is
For a given data set, only the kernel function and the regularity parameter C must be selected to specify one SVM.
The Training and Prediction of Protein Structural Class
According to the SCOP database, the protein domains generally fall into one of the following four classes: (1) all-α, (2) all-β, (3) α/β, (4) α+β.
According to its amino acid composition, a protein domain can be represented by a point or a vector in a 20-D space. However, of the 20 amino acid composition components, only 19 are independent due to the normalisation condition . Accordingly, strictly speaking, if based on amino acid composition, a protein should be represented by a point or a vector in a 19-D space rather than 20-D space as defined in a conventional manner. Furthermore, according to Chou's invariance theorem, the final predicted result will remain the same regardless of which one of the 20 components is left out for forming the 19-D space. It is extremely important to realize this, particularly when the calculations involve a covariance matrix such as in the case of refs.11-14. For the current study, the amino acid composition was used as the input of the SVM.
The SVM method applies to two-class problems. In this paper, for the four-class problems, we use a simple and effective method: "one-against-others" method [27, 28] to transfer it into two-class problems.
The computations were carried out on a Silicon Graphics IRIS Indigo work station (Elan 4000).
In this research, for the SVM, the width of the Gaussian RBFs is selected as that which minimized an estimate of the VC-dimension. The parameter C that controls the error-margin tradeoff is set at 100. After being trained, the hyperplane output by the SVM was obtained. This indicates that the trained model, i.e. hyperplane output which is including the important information, has the function to identify protein structural classes.
We first test the self-consistency of the method, latterly is to test the method by cross-validation (jackknife test). As a result, the rates of both self-consistency and cross-validation were quite high.
Muskal SM, Kim SH: Predicting protein secondary structure content: A tandem neural network approach. J. Mol. Biol. 1992, 225: 713–727.
Chou PY: Amino Acid composition of four classes of protein,. in Abstracts of Papers, Part I, Second Chemical Congress of the North AmericanContinent. Las Vegas, Nevada, 1980.
Chou PY: Prediction of protein structural classes from amino acid composition. In: Prediction of Protein Structure and the Principles ofProtein Conformation, ed. Fasman, G.D., Plenum Press: New York. 1989, 549–586.
Nakashima H, Nishikawa K, Ooi T: The folding type of a protein is relevant to the amino acid composition. J. Biochem 1986, 99: 152–162.
Klein P, Delisi C: Prediction of protein structural class from amino acid sequence. Biopolymers 1986, 25: 1659–1672.
Zhang CT, Chou KC: An optimization approach to predicting protein structural class from amino acid composition. Protein Science 1992, 1: 401–408.
Dubchak I, Holbrook SR, Kim SH: Predicting protein secondary structure content: A tandem neural network approach. Proteins: Structure, Function and Genetics. 1993, 16: 79–91.
Metfessel BA, Saurugger PN, Connelly DP, Rich ST: Cross-validation of protein structural class prediction using statistical clustering and neural networks. Protein Science. 1993, 2: 1171–1182.
Rost B, Sander C: Combining evolutionary information and neural networks to predict protein secondary structure. Protein: Struc. Func., and Genetics. 1994, 19: 55–72.
Chandonia JM, Karplus M: Neural networks for secondary structure and structural class prediction. Protein Science. 1995, 4: 275–285.
Chou KC: A novel approach to predicting protein structural classes in a (20–1)-D amino acid composition space. Proteins: Structure, Function and Genetics, 1995, 21: 319–344.
Chou KC, Maggiora GM: Domain structural class prediction. Proteins Engineering, 1998, 11: 523–538. 10.1093/protein/11.7.523
Chou KC, Liu W, Maggiora GM, Zhang CT: Prediction and classification of domain structural classes. Proteins: Structure, Function and Genetics. 1998, 31: 97–103. Publisher Full Text 10.1002/(SICI)1097-0134(19980401)31:1%3C97::AID-PROT8%3E3.0.CO;2-E
Bahar I, Atilgan AR, Jemigan RL, Erman B: Understanding the recognition of protein structural classes by amino acid composition. Proteins 1997, 29: 172–185. 10.1002/(SICI)1097-0134(199710)29:2<172::AID-PROT5>3.0.CO;2-F
Chou KC: A key driving force in determination of protein structural classes. Biochem. Biophys. Res. Commun. 1999, 264: 216–224. 10.1006/bbrc.1999.1325
Chou KC, Zhang CT: Prediction of Protein Structural Classes. Critical Reviews in Biochemistry and Molecular Biology. 1995, 30: 275–349.
Chou KC: Review: Prediction of protein structural classes and subcellular location. Current Protein and Peptide Science. 2001, 1: 171–208.
Vapnik VN: The Nature of Statistical Learning Theory. Springer, 1995.
Zhou GP: An Intriguing Controversy over Protein Structural Class Prediction. Journal of Protein Chemistry. 1998, 17: 729–738. 10.1023/A:1020713915365
Murzin AG, Brenner SE, Hubbard T, Chothia C: SCOP: a structural classification of protein database for the investigation of sequence and structures. Jourani of Molecular Biology 1995, 247: 536–540. 10.1006/jmbi.1995.0159
Cai YD: Is it a paradox or misinterpretation? Proteins: Structure, Function and Genetics. 2001, 43: 336–338. 10.1002/prot.1045.abs
Zhou GP, Assa-Munt N: Some insights into protein structural class prediction. Proteins: Structure, Function and Genetics. 2001, 44: 57–59. 10.1002/prot.1071
Cai YD, Zhou GP: Prediction of protein structural classes by neural network. Biochimie. 2000, 82(8): 783–5. 10.1016/S0300-9084(00)01161-5
Vapnik VN: Statistical Learning Theory. Wiley-Interscience, New York, 1998.
Robert B, Matthew T, Sean H, Bernard B: Drug Design by Machine Learning: Support Vector Machine for Pharmaceutical Data Analysis. Proceedings of the AISB'00 Symposium on Artificial Intelligence in Bioinformatics. 2000, 1–4.
Joachims T: Text Categorization with Support Vector Machines: Learning with Many Relevant Features". Proceedings of the European Conference on Machine Learning, Springer, 1998.
Brown MPS, Grundy WN, Lin D, Cristianini N, Sugnet C, Ares JM, Haussler D: Knowledge-based Analysis of Microarray Gene Expression Data by using Support Vector Machines. Proc. Natl. Acad. Sci. 2000, 97: 262–267. 10.1073/pnas.97.1.262
Ding CHQ, Dubchak I: Multi-class Protein Fold Recognition Using Support Vector Machines and Neural Networks. Bioinformatics 2001, 4(17): 349–358. 10.1093/bioinformatics/17.4.349
Joachims T: Making large-Scale SVM Learning Practical. Advances in Kernel Methods -Support Vector Learning, B. Scholkopf and C. Burges and A. Smola (ed.), MIT Press, 1999, 11.
Joachims T: Transductive Inference for Text Classification using Support Vector Machines. International Conference on Machine Learning (ICML),1996b
Cortes C, Vapnik VN: Support vector networks. Machine Learning. 1995, 20: 273–293. 10.1023/A:1022627411411
About this article
Cite this article
Cai, YD., Liu, XJ., Xu, Xb. et al. Support Vector Machines for predicting protein structural class. BMC Bioinformatics 2, 3 (2001). https://0-doi-org.brum.beds.ac.uk/10.1186/1471-2105-2-3
- Support Vector Machine
- Amino Acid Composition
- Support Vector Machine Model
- Neural Network Method
- Support Vector Machine Method