 Research article
 Open Access
 Published:
Beyond colocalization: inferring spatial interactions between subcellular structures from microscopy images
BMC Bioinformatics volume 11, Article number: 372 (2010)
Abstract
Background
Subcellular structures interact in numerous direct and indirect ways in order to fulfill cellular functions. While direct molecular interactions crucially depend on spatial proximity, other interactions typically result in spatial correlations between the interacting structures. Such correlations are the target of microscopybased colocalization analysis, which can provide hints of potential interactions. Two complementary approaches to colocalization analysis can be distinguished: intensity correlation methods capitalize on pattern discovery, whereas objectbased methods emphasize detection power.
Results
We first reinvestigate the classical colocalization measure in the context of spatial point pattern analysis. This allows us to unravel the set of implicit assumptions inherent to this measure and to identify potential confounding factors commonly ignored. We generalize objectbased colocalization analysis to a statistical framework involving spatial point processes. In this framework, interactions are understood as position codependencies in the observed localization patterns. The framework is based on a model of effective pairwise interaction potentials and the specification of a null hypothesis for the expected pattern in the absence of interaction. Inferred interaction potentials thus reflect all significant effects that are not explained by the null hypothesis. Our model enables the use of a wealth of wellknown statistical methods for analyzing experimental data, as demonstrated on synthetic data and in a case study considering virus entry into live cells. We show that the classical colocalization measure typically underexploits the information contained in our data.
Conclusions
We establish a connection between colocalization and spatial interaction of subcellular structures by formulating the objectbased interaction analysis problem in a spatial statistics framework based on nearestneighbor distance distributions. We provide generic procedures for inferring interaction strengths and quantifying their relative statistical significance from sets of discrete objects as provided by image analysis methods. Within our framework, an interaction potential can either refer to a phenomenological or a mechanistic model of a physicochemical interaction process. This increased flexibility in designing and testing different hypothetical interaction models can be used to quantify the parameters of a specific interaction model or may catalyze the discovery of functional relations.
Background
A general biological principle states that cellular function results from the combined interactions of subcellular structures in space and time. Interactions typically manifest themselves through statistical dependencies in the spatial distributions of the involved structures. Here, we adopt this general definition and we understand interaction as the collection of all effects that cause significant (above the level predicted by a null hypothesis) correlations in the positions of the participating objects.
Over the last decades, advances in fluorescent markers have enabled probing interactions of subcellular structures in the microscope, either directly or indirectly. The direct approach relies on experiments that generate a signal upon the proximity required for molecular interaction. Indirect approaches are based on independently imaging two populations of interest, and searching for clues of interaction in their spatial distributions. This approach is based on the paradigm that spatial proximity (or colocalization) is a hallmark of many types of physical and chemical interactions between subcellular structures. If two or more structures interact, their spatial distributions hence appear correlated. The reverse, however, is not necessarily true. Presence or absence of significant colocalization does not imply presence or absence of interaction. The reason is that colocalization depends on the specific interaction mechanism: An unobserved third structure may act as a confounding factor (in the statistical sense), making the observed structures appear colocalized even though they do not interact. Furthermore, one can imagine interaction mechanisms that lead to spatial distributions with correlations that are not captured by simple colocalization measures. Hence, the interaction has to be statistically inferred from the data.
Such inference, however, entails a tradeoff between the objectives of pattern discovery and statistical detection power. According to these objectives, two complementary approaches to colocalization analysis can be distinguished: Intensity correlation methods capitalize on pattern discovery [1], whereas objectbased methods [2] emphasize detection power. Intensity correlation methods quantify correlations in the intensities of different color channels on individual pixels. Intensity correlation methods are straightforward to implement and use. The results, however, may be difficult to interpret since interactions need to be inferred from correlations in intensity space, which is sensitive to the blurring and noise inherent to microscopic imaging systems [3]. Objectbased methods quantify the spatial relationships between sets of discrete objects. This requires reducing the image to a set of geometric objects using, e.g., image segmentation or fitting of structure models. Objectbased approaches infer interactions from correlations in physical space, which allows constructing intuitive and simple colocalization measures, such as counting the number of overlapping objects [2].
The intensitybased approach is limited to interactions on a spatial scale on the order of the resolution of the microscope. While the objectbased approach is not necessarily limited to any particular length scale (note that the localization accuracy for an isolated object is not limited by the spatial resolution of the microscope, but rather the signaltonoise ratio [4–6]), a spatial scale is nevertheless assumed in practice. Many objectbased colocalization methods rely on a hard threshold for the distances between objects in order to distinguish between "colocalized" and "not colocalized" for each individual pair of objects [2]. The choice of distance threshold greatly influences the types of interactions that can be reliably detected. The actual physical or chemical interaction between subcellular objects can be of short temporal duration and they can quickly separate thereafter. In such situations, high thresholds can increase the detection power, but only at the expense of increased falsepositive rates. When interactions take place over long distances, the choice of threshold implicitly determines a range limit of the analysis.
Apart from fixing the interaction scale a priori, using a hard distance threshold also implies a binary distinction of pairwise distances: either they are below the threshold and hence the objects are assumed to interact  or they don't. A colocalization percentage thus corresponds to an indirect measure for the preference of "interaction" over "noninteraction". This preference reflects the strength of the interaction. However, it also depends on the frequency of possible distances that the population of objects can assume.
More specifically, the cellular context in which the interactions take place is a confounding factor. A high colocalization percentage can, for example, be observed in a cell with densely packed subcellular structures of interest, irrespective of their interaction strength. This artifact needs to be considered in statistical tests [7] or corrected for in order to construct an interaction score [8].
Taken together, objectbased approaches provide intuitive colocalization measures whose statistical interpretation, however, is not straightforward. Here, we establish a connection between colocalization and the notion of interaction as used in spatial statistics [9], namely the nonindependence of the relative positions of objects under study. This is based on modeling the nearestneighbor distance distribution between the observed objects. These distances are the result of interactions, measurement inaccuracies, and the geometry of the domain in which the objects are distributed. This modeling provides generic procedures for inferring interaction strengths and quantifying their statistical significance. Our approach helps formalizing design decisions in colocalization and interaction studies and shows how they translate to biological hypotheses. Standard objectbased colocalization analysis is included as a special case, which makes explicit the connections between interaction and colocalization. After developing and characterizing the statistical interaction analysis framework, we exemplify its utility in a biological study of virus entry.
Results and Discussion
Basic scenario: colocalization analysis
We review the basic concepts of classical objectbased colocalization analysis and its interpretation in terms of interactions.
Objectbased colocalization measures are typically constructed for two sets of objects and . These objects are located in a bounded region Ω ⊂ ℝ^{n}with boundary ∂Ω and dimensionality n (usually 2 or 3; see Fig. 1). Each object i (j) is represented by a feature vector x_{ i }(y_{ j }) that comprises information about the object's position and, if available, its dimension and shape. These features vectors are extracted from image data by means of image segmentation or fitting of structure models.
Suppose one wishes to investigate the interaction between the objects in X and Y, one can define for each x_{ i }the distance to the nearest neighbor (NN) in Y,
The function d(·) is a suitable distance function in feature space, for example the Euclidean distance between pointlike objects or the minimum distance between outlines of more complex objects. A nearestneighbor distance distribution p(d) can then be estimated from the set of distances . The classical overlap or nearestneighbordistance colocalization measure C^{t}follows by counting [8]:
where 1(·) is the indicator function and t an applicationspecific distance threshold. The form of Eq. 2 implies assumptions about how the objects in X and Y interact. The interaction process is considered to be translation and rotationinvariant since only the distance between interacting objects is taken into account. Based on this distance only two categories of positions of the objects in X are distinguished: either they are sufficiently close to any object in Y to be considered interacting, or they are not. Furthermore, objects in X interact with at most one object in Y and they do not experience the presence of any y_{ j }unless they cross the distance threshold t. The choice of t reflects an assumption about the length scale of the interaction to be detected.
Inferring interactions from an observed colocalization measure C^{t}is not trivial since C^{t}> 0 does not necessarily imply any interaction between the objects. This is because spatial correlations can also be caused by confounding factors, such as the cellular context {Ω, Y}. Even if the objects in X and Y do not interact there is a finite probability that any possible distance in an interval Δd about d_{ i }is observed. We arbitrarily choose Y as a reference in order to compute the relative frequency of possible distances (state density) as:
This density q(d) is determined by the positions, dimensions, and number density of the objects in Y (see Fig. 1). Independent random positions will result in a relatively wide density q(d) (Fig. 1C). With regularly placed objects Y, large distances do not occur (Fig. 1B). Clustering increases the frequency of long distances at the expense of short distances (Fig. 1D). Objects with large surfaces or a large number density give rise to shorter distances. In case there are interactions between the objects in X and Y, some of the possible distances are additionally favored over others, deforming the density q(d) to p(d).
The colocalization measure C^{t}is, therefore, not sufficient to separate the contributions from the cellular context and the interactions. Information about the interactions is only contained in the deviation from an expected baselevel in the absence of interactions. This base level, , is the colocalization measure that would be observed under the hypothesis H_{0}: "no interaction" (obtained by letting p(d) = q(d) and numerical evaluation of the integral in Eq. 2). But how does a certain deviation from the base level relate to interactions between the objects, and what deviations can be considered significant? We address this question in the following sections by generalizing colocalization analysis to interaction analysis. Ideally, an interaction score is independent of the cellular context and reflects variations of the interaction strength in a monotonous fashion. The first step toward constructing such a score is a precise definition of the term interaction strength in the context of an interaction model.
Generalization: interaction analysis
Spatial point process analysis[9–11] is a standard statistical framework for studying the spatial distribution of interacting objects. Our interaction analysis is derived from the general binary Gibbs process with fixed number of objects. Its central component is an effective pairwise interaction potential Φ(·). In many applications, "interaction" is an abstraction of the different effects that collectively cause an observed spatial pattern. Nevertheless, the mathematical form of the Gibbs process corresponds to physical models of interacting objects. The potential associates an energy level with each pair {i, j} of interacting objects. The probability density of the Gibbs process for two sets of interacting objects, X and Y, has the shape of a Boltzmann distribution:
i.e., states with lower energy occur with higher probability. Eq. 4 implies mutual independence of the objects within the same set X or Y, in agreement with the assumptions formulated in the previous section. For nearestneighbor interactions, the corresponding interaction potential is given by:
where the function ϕ(d) specifies the distance dependence of the interaction.
Assume a cellular context {Ω, Y} is given. The probability density p(XΩ, Y) for the potential in Eq. 5 then only depends on the d_{ i }. An inner sum over all j, as in Eq. 4, is then not required. The mutual independence within X allows factorizing p(XΩ, Y) into terms that only depend on a single d_{ i }:
where, unlike in Eq. 4, an explicit dependence of the potential on x_{ i }is no longer present.
The probability of observing a certain x_{ i }is proportional to exp ( ϕ (d_{ i })). The probability of observing a certain d_{ i }, however, also depends on how frequently an arbitrary object x is a distance d_{ i }away from its NN in the given cellular context. This frequency is given by the state density q(d) as stated in Eq. 3. Straightforward calculations yield:
The normalization constant Z (the partition function) renders p (dq) a true probability density function.
So far, we have not specified any particular shape for the interaction potential ϕ(·), which can be a parametric or nonparametric model. A specific choice constitutes a hypothesis or assumption about the range, strength, and distance dependence of the interaction. These three aspects of the interaction are represented independently in our parameterization:
ϵ is the strength, f encodes the shape, σ defines the lengthscale, and t is a shift along the distance axis of the interaction potential. Using Eqs. 7 and 8 we find the joint probability density of observations D:
This is the central class of models that we use to extend colocalization analysis to interaction analysis. All interaction models will be formulated as specific instances of such a model.
The assumptions underlying the simple overlap colocalization measure can, for example, be formalized in a specific interaction potential. Only two categories of distances (d < t and d ≥ t) are distinguished (Eq. 2). This implies a step function for the shape f(z) of the interaction potential ϕ(d) (taking σ = 1):
Using the integral definition in Eq. 2, the colocalization measure C^{t}can then be expressed as a function of the interaction strength. Inserting Eq. 10 into Eq. 7 and Eq. 2 and solving for ϵ yields an estimator of the model interaction strength:
The quantity corrects for the cellular context and, therefore, fulfills our requirements for a valid interaction score. Eq. 11 relates the purely descriptive colocalization measure C^{t}to an interaction model between the objects in X and Y. It builds a bridge between patterns in the data (the cellular context summarized in q and the measure C^{t}) and functional relationships (interactions) between subcellular components.
Whether an observed estimate is indicative of the actual presence of an interaction, however, has to be addressed using statistical inference as presented in the following section.
Hypothesis testing and power analysis for the step potential
In the parameterization of our interaction model (Eqs. 8 and 9), the presence of an interaction is equivalent to ϵ ≠ 0. Since is an estimator, it is a random variable. Even if the hypothesis H_{0}: "no interaction" is true, a nonzero can occur with finite probability ( ≠ 0 does not imply ϵ ≠ 0). Inference about interactions requires finding a critical estimated interaction strength above which one can reject H_{0} on a prescribed significance level α.
This critical interaction strength is determined by the distribution of under H_{0} (null distribution), which depends on the sample size N, q, and the prescribed α. Under H_{0}, C^{t}N is binomially distributed with parameters (, N). Hence, the critical C^{t}can be computed from the (numerically) inverted cumulative distribution function of the binomial distribution. The corresponding critical follows from Eq. 11.
The dependence of the critical C^{t}and on and N is shown in Fig. 2A and 2B. It can be seen that the minimum significant excess over varies only weakly with (Fig. 2A). Obviously, large values of in conjunction with small N do not allow rejecting H_{0}, even if C^{t}= 1. The critical value of is highest at the two extremes of and lowest for ≈ 0.4 (Fig. 2B). As for C^{t}, it can be seen that for large and small N no finite is sufficiently large to allow rejecting H_{0}.
The curves in Fig. 2B show the decision of the statistical test based on the estimated interaction strength . A true interaction with a strength ϵ greater than this critical value does, however, not guarantee that it will always be detected by the test (type II error: β). Furthermore, a weak interaction may lead to unwanted rejection of H_{0}. The behavior of the test critically depends on the effect size, which quantifies the departure from H_{0}. Here, effect size refers to the true interaction strength ϵ = a > 0. The statistical "power" (1  β) quantities the probability of rejecting H_{0} when H_{1}: "ϕ = ϕ^{st}, ϵ = a" is true. In Fig. 2C, the detection power for a true strength of a = 1 is shown as a function of . As expected from Fig. 2B, the power is low at the extremes of , eventually dropping significantly below the recommended value of 0.8, even for N = 100. Weak interactions are harder to detect, requiring larger sample sizes to yield a certain power.
In the design of experimental interaction studies, a key objective is to maximize the robustness and reliability of detecting effects of unknown size. Power can be increased by optimizing the experimental design or the subsequent statistical analysis. While increasing the sample size might be possible, controlling the cellular context is not feasible in most situations. Our analysis is based on the interaction model introduced in the previous section. It allows specifying different shapes f(·) and scales σ of the interaction potential. Power could potentially be increased by better modeling the interaction potential. In the next section, we thus quantify the influence of alternative model potentials on statistical power.
Improving statistical power with nonstep interaction potentials
Constructing statistical tests as described above requires assuming a specific shape and scale of the interaction potential. In the absence of prior knowledge, however, this model potential can be arbitrarily different from the true potential of the actual biological interactions under observation. Test statistics that are based on a model potential close to the real one may achieve greater power.
We quantify the influence of the discrepancy between the model and the true potential by considering a scenario where N objects {x_{ i }} are distributed in the square region Ω containing M randomly placed circular objects {y_{ i }} with identical radii R. Fig. 3A shows the corresponding state density q(d). The objects in X interact with the objects in Y according to the Plummer potential (with t = 0):
This potential has an overall 1 = dshape, but finite value and slope everywhere. The parameter ϵ again controls the interaction strength (potential depth). The parameter σ sets the length scale of the interaction (potential range) and allows gradually changing ϕ(d) from a steplike shape to a potential that causes significant attraction toward the objects in Y over large distances (see Fig. 3B).
For such more general potentials, algebraic expressions for (such as Eq. 11 for the step potential) can in general not be derived. Statistical tests for the presence of interactions can nevertheless be constructed using a different statistic. Since Eq. 9 describes a member of the exponential family,
is a sufficient test statistic for ϵ [12].
For a set of distances D, distributed according to Eq. 9 with ϕ(d) = ϕ^{pl}(d), a test for the presence of interactions can thus be constructed based on under H_{0}: "no interaction", where the scale parameter σ is assumed to be known. The nulldistribution can be approximated by i.i.d. Monte Carlo (MC) samples (see Materials and Methods). An observed value of T^{pl} is then ranked among the . If it ranks higher than ⌈(1  α)K⌉th, H_{0} is rejected on the significance level α[12]. The statistical power of this test to reject H_{0} when H_{1}: ϕ = ϕ^{pl}, ϵ = a" is true, can be estimated with additional MC simulations: For a fixed effect size a > 0, one draws N distances d_{ i }from p(d), computes T^{pl}, and conducts the test as described above [12]. This procedure is repeated many times and the fraction of tests rejected serves as an estimator of the power.
In order to quantify the influence of the model potential on statistical power, we test H_{0} against H_{1} and H_{2}: "ϕ = ϕ^{st}, ϵ = a" on data generated under H_{1} for varying σ (see Fig. 3B for the true interaction potentials under H_{1}). Testing H_{0} against H_{2} makes use of the sufficient statistic , which is proportional to C^{t}with t = 0. As opposed to T^{pl}, this statistic only contains information about the signs of the d_{ i }and should thus yield a less powerful test.
Fig. 3C shows the number of samples required to reach 80% power as a function of the strength a of the true interaction potential. It can be seen that the power of a test based on the true interaction potential (solid lines) is higher than the power of a test based on a step potential (dashed lines). Moreover, this difference strongly increases with increasing potential range σ: for σ = 5 (blue lines) using the step model potential requires 4 times more samples. If the true potential is close to a step potential (σ = 0.2, red lines), both tests perform comparably well. Moreover, the figure also shows that interactions over longer distances are harder to detect. We therefore conclude that one needs to be careful when assuming a step potential (as implicitly done in traditional colocalization analysis). Controlling power requires prior knowledge about the interaction potential. Such prior knowledge can easily be included in the present framework by choosing t, σ, and f(·).
Example: virus trafficking
The uptake and intracellular transport of virus particles is a complex process that involves temporary association with membrane receptors and multiple organelles of the endocytic machinery, such as early and late endosomes [13]. In many cases, fluorescence microscopy allows resolving the involved entities as discrete objects. This has previously motivated the use of objectbased colocalization measures to quantify association kinetics and unravel infection pathways. Here, we show how the generalized framework of interaction analysis presented above can be applied in a practical experimental situation, and how it enables using a large toolbox of wellknown statistical techniques.
We consider a set of 274 twocolor fluorescence microscopy images of single HER911 cells expressing the small GTPase Rab5 tagged with enhanced green fluorescent protein (EGFP), recorded in the green color channel. Rab5 is a regulator of clathrinmediated endocytosis and a marker for early endosomes. These dynamic, lipidbounded organelles are formed by invaginations of the plasma membrane. They are the first sorting compartment of clathrinderived cargo [13]. Either fluorescently tagged Adenovirus serotype 2 (Ad2) or its temperature sensitive mutant (TS1) were recorded in the red color channel. Images were taken between 2 and 46 min post infection. The same data have already been used in a previous study [5]. Virus positions and endosome outlines were extracted from the images as described in the Materials and Methods section. Based on these object representations, the set D of virustonearestendosome distances and the state density q(d) were computed for each of the imaged cells.
Like Ad2, TS1 is known to enter the cell by clathrinmediated endocytosis, but the mutation inhibits escape from endosomes [14, 15]. This should be reflected in a deviation of the empirical distribution of observed distances D from the null distribution p(d) = q(d), which is stronger for TS1 than for Ad2. In our framework, this translates to a nonflat interaction potential between virus centroids and outlines of Rab5positive endosomes.
Before modeling an interaction potential, we test H_{0}: "ϕ(d) = 0" against H_{1}: "ϕ(d) ≠ 0" for each imaged cell using a nonparametric statistical test (see Materials and Methods). This test does not assume any specific shape of the interaction potential, which allows detecting any type of interaction, albeit with reduced power. The results are summarized in Table 1. The fraction of cells for which H_{0} has to be rejected is significantly higher for TS1 than for Ad2, irrespective of the significance level and despite the on average smaller sample sizes N. However, Ad2 exhibits significant interaction with endosomes in half of the cells (α = 0.05).
These results indicate that the interaction potential is nonzero for many cells. They do not, however, permit any conclusions about the shape or strength of the interaction potential, for which, in addition, no prior information is available. We therefore apply a nonparametric estimation procedure for the interaction potential to get a sketch of its strength and distancedependence. Subsequently we can specify and identify parametric potentials. Ignoring, for now, possible variability between cells and virus types, we pool all data and estimate a common nonparametric potential (see Materials and Methods). The estimated is shown in Fig. 4. Its shape is notably different from a step function. The slow decay suggests that viruses interact with endosomes over distances of about 10 pixels (1 μ m) from their center.
The estimated nonparametric potential serves as a template for the shape of parametric models. Parametric potentials can be identified more robustly from sets of observed distances of individual cells. This allows correlating their parameters with covariates such as the virus type or the time at which a cell was imaged after infection. We consider four different potentials, two that resemble the shape in Fig. 4 (Hermquist and Linear type 1) and two that are generalizations of the step potential with a plateau below d = 0 (Linear type 2 and Plummer). For all potentials, we fix the threshold to t = 0. Definitions of the potential shapes f(·) are given in the Materials and Methods section.
The parameters of the potentials are found by maximum likelihood estimation (MLE). In order to exclude celltocell variations of the potential range, we do not determine the pairs (ϵ_{ k }, σ_{ k }) for each cell separately. Rather, we estimate for a given potential a single scale parameter σ_{ k }= σ* common to all cells, while the interaction strengths ϵ_{ k }may vary between cells. The resulting (N^{cells} + 1)dimensional estimation problem is solved with a nested ML algorithm (see Materials and Methods). The common scale and the maximum of the pooled loglikelihood l* for the four potentials are reported in Table 2. As a reference, the values are also given for a step potential with distance threshold t = 0.
The potentials are ranked according to their loglikelihood. It can be seen that the step potential is outperformed by all others. This remains unchanged even if one compares Akaike or Bayesian information criteria, which take into account the smaller number of free parameters. With a difference in loglikelihood of > 10^{3} to secondbest fit, the Hermquist potential is by far the best fit. It is also subjectively most similar to the nonparametric potential identified above. Fig. 5 shows an example of an imaged cell, infected with TS1, together with the empirical and estimated distance distributions and the corresponding Hermquist potential. The images of Ad2infected cells are visually indistinguishable from those of TS1infected cells and are hence not shown. Despite fitting only one independent parameter (σ* is fixed from the estimate over all cells), the estimated model distribution captures the features of the data remarkably well.
The estimated interaction strength of the Hermquist potential varies within and between the two groups of infected cells. The withingroup variability comprises statistical fluctuations and natural variations between cells. Since virus internalization and transport is a dynamic process, the time at which a cell was imaged (time post infection) is a further source of ingroup variability. Fig. 6 shows the estimated interaction strength of a Hermquist potential for all cells infected with Ad2 (blue crosses) and TS1 (red circles) as a function of the time post infection. Throughout the observation period, the interaction strength for TS1 is significantly larger than that for Ad2, confirming the trend reported in Table 1. Furthermore, a temporal maximum of the interaction strength is apparent for TS1, while for Ad2 no significant variation over time can be resolved. These results indicate that TS1 and Ad2 use different uptake pathways or exhibit significantly different escape kinetics from Rab5positive endosomes.
Conclusions
We have introduced a statistical inference framework for robustly estimating interaction parameters from experimentally observed object distributions.
This allowed establishing a connection between spatial codistributions of objects and interaction, by formulating the objectbased interaction analysis problem in a spatial statistics framework based on nearestneighbor distance distributions. The present framework provides generic procedures for inferring interaction strengths and quantifying their statistical significance. Standard objectbased colocalization analysis is included as a limit case, making explicit the connections between the present framework and more classical approaches.
In the present framework, two novel key quantities emerge: (i) the state density q(d), which is the distribution of nearestneighbor distances expected under the null hypothesis of no interaction, and (ii) the interaction potential ϕ(d), which defines the strength and distance dependence of the interaction. We have shown that classical colocalization analysis amounts to estimating the parameters of a step potential. This requires a notion of "inside" and "outside", either naturally defined by the physical extent of the objects or imposed through the step function's distance threshold. For pointlike objects, or weak correlations between object positions, the choice of distance threshold is arbitrary.
This limitation can be relaxed by affording more general shapes of the interaction potential, which naturally extends colocalization analysis to (spatial) codistribution analysis without requiring any additional assumptions. The additional flexibility allows capturing information about a wider range of subcellular interactions. This was demonstrated by statistical power analysis of the classical and generalized measures. Our results highlight that the probability of detecting an interaction strongly depends on the cellular context. We furthermore illustrated the influence of the range of an interaction on its detectability. Test statistics that include knowledge about the shape of the true interaction potential can greatly reduce the number of samples required to achieve a certain target power. Physicochemical models might provide such prior knowledge. Alternatively, a nonparametric phenomenological potential can be estimated from the data as demonstrated here. This potential can then serve as a template for the parametric potentials used in subsequent analyses. In addition, the present framework enables comparison of the likelihoods of different hypothetical physicochemical interaction models directly on the original image data.
The present approach enables applying a wide range of established statistical tools for analyzing experimental data, from parameter identification to model selection. This workflow was illustrated by studying the spatial patterns of endosomes and viruses infecting live human cells. In this case study, the experimental data were very well explained using only a single free parameter per cell. Among the five potentials considered, the step potential (corresponding to the classical colocalization measure) was worst in explaining the data. This highlights the benefit of the present method over classical colocalization analysis. Moreover, the fitted potentials provided additional quantitative readouts that could be used in subsequent machine learning analyses.
For simplicity the case study was done on 2D projections of 3D images. The presented approach, however, is equally applicable in three dimensions without any changes, provided threedimensional object detection and segmentation is available. Projecting the data into two dimensions alters the estimated potentials (as it also does for any other colocalization measure), since it distorts both the distance data D and the state density q(d). We empirically found that the strengths of the potentials estimated from the projected 2D data may be smaller than those estimated directly on the raw 3D data (data not shown). Although all distances D are systematically reduced by the projection, this effect is overcompensated by the nonlinear distortion of q(d), which is strongest for intermediate distances, but negligible for very small and large distances. Besides projection artifacts, errors in the image processing may also influence the estimated colocalization measures. Depending on the accuracy of the image segmentation method used, object sizes can be under or overestimated, or entire objects can be missed altogether. This problem is inherent to all forms of colocalization or distribution analysis. We have assessed the sensitivity of our method with respect to image segmentation errors by successively eroding or dilating the endosomes from the presented case study. The results show that the mean of the estimated strength of the Hermquist potential remains unaffected, yet the variance of the estimate increases for strong erosion when entire endosomes start to be missed (data not shown). This robustness of the present method is due to the state density q(d) correcting for size errors. The classical colocalization measure, naively corrected for the cellular context by subtracting the amount of unspecific colocalization C_{0}, significantly changes when under or overestimating object sizes. For strong erosion, leading to very small and frequently missing objects, it even drops to a meaningless value of zero (data not shown). Since image segmentation errors are always present in practical applications, we consider the robustness of our method one of its major advantages over classical measures.
The presented framework is limited by the same assumptions that also underlie classical colocalization analysis: (i) spatial homogeneity and (ii) isotropy of the interaction within the observation window, and (iii) exclusively nearestneighbor interactions between objects of different classes. Assumption (i) is, e.g., violated if large areas of the analyzed images do not contain any objects. In this case, estimation of q(d) is not robust. Assumption (iii) imposes limits on admissible distances between objects: If objects X are attracted toward objects Y, the distances between the objects within the set Y need to be larger than the typical interaction range.
All of these limitations could be relaxed by using positiondependent interaction potentials or allowing for manybody interactions as described by general Gibbs processes. Considering such processes, however, is theoretically and numerically challenging. The presented framework could also be extended by including additional confounding factors, such as imaging artifacts causing spurious colocalization. Temporal plasticity of interactions, celltocell variations, and experimenttoexperiment variations could be accounted for through additional covariates (time, cell index, experiment index) in the statistical model. Already in its present form, the statistical framework can be used to test more general hypotheses, such as "interactions are stronger in strain A than in strain B".
The interpretation of fitted potentials is limited to their relative strengths. In the absence of a mechanistic or physical model of the process that has created the observed spatial pattern, biophysical interpretation of the identified parameter values is difficult or misleading. This is because the fitted interaction potentials reflect the collection of all intracellular phenomena that lead to the observed point pattern. Interestingly, however, a relation between the steadystate distribution of a diffusion process with added deterministic forces and the distribution of the Gibbs process (Eq. 4) exists: If the deterministic force acting between the diffusing objects is given by ∂ϕ/∂d, the two distributions become identical (in appropriate units). This fact points a possibility of connecting fitted interaction potentials with biophysical processes.
Methods
Image acquisition and processing
Endosomes and virus particles were imaged with a highresolution spinning disk confocal microscope (NA 1.35, 100× objective plus additional 1.6× lens, 100 nm pixel size) as described [5]. We acquired zstacks of 8 images each with a 400 nm zspacing. Stacks were maximum projected prior to image analysis. Endosome outlines were represented as piecewise linear closed splines in the focal plane. Outlines were estimated from images using a specialized modelbased image analysis technique [5], yielding subpixel localization accuracy and precision. Virus particles were modeled as points and represented by estimated intensity centroid positions [6]. Prior to distance measurement, relative shifts between virus and endosome positions due to chromatic aberration were corrected using an empirical calibration function [5, 16]. The boundary ∂Ω of the region Ω was defined as the cell boundary. An approximation of it was found by lowpass filtering and thresholding of the endosome images.
Measuring q(d)
The state density q(d) was determined from the objects {y_{ i }} contained in the region Ω. Positions x in Ω were sampled exhaustively on a uniform Cartesian grid with spacing h = 0.25 pixel. For each x, the distance d_{ i }to the nearest neighbor in Y was computed. Using this finite sample of distances D = {d_{ i }}_{ i }, an approximation of q(d) was found by Gaussian kernel smoothing density estimation using the MATLAB (The MathWorks, Inc.) function ksdensity.m with default settings.
Test for interaction
Following [12], a nonparametric test for interaction was constructed using the distance counts
in L = 20 equisized bins defined by L + 1 strictly increasing thresholds t_{ l }that span the entire nonzero range of q(d) for a given cell. First, a Monte Carlo sample from the null distribution of T was obtained by sampling N = D distances d_{ i }from q(d), computing T_{ k }, and repeating this procedure K times. This sample allowed approximating the expectation E_{0}(T) and covariance matrix Cov_{0}(T) of the null distribution. The test statistic U was defined as
Second, T and U were computed for the set D of observed distances. U was then ranked among the obtained from an additional Monte Carlo sample , generated as described above. If it ranked higher than ⌈(1  α)K⌉th, H_{0} was rejected on the significance level α.
The parametric tests used in sections "Hypothesis testing and power analysis for the step potential" and "Improving statistical power with nonstep interaction potentials" followed a simpler protocol. The ranking was directly performed among the scalar test statistics T^{st} and T^{pl}, avoiding the detour via U. A priori estimation of the expectation and variance of T^{st} and T^{pl} was therefore not required.
ML estimation of potentials
For a given potential ϕ, the loglikelihood of its parameters Θ given the observations D_{ k }in cell k is:
Simultaneous estimation of the common scale σ* and independent strengths ϵ_{ k }of a set of N^{cells} cells was done by maximizing the pooled loglikelihood:
with respect to the parameters {Θ_{ k }} = {(ϵ_{ k }, σ*)}. This was done by numerically maximizing (using NelderMead simplex) the sum of maxima l((ϵ_{ k }, σ*)D_{ k }, k) with respect to σ*.
The piecewise linear nonparametric potential was defined as a weighted sum of kernel functions κ(·) centered on the support points d_{ p }:
P = 21 support points d_{ p }were distributed between 5 and 95 with constant spacing h = 5 pixel. Setting w_{ P }= 0 enforced = 0 for all d ≥ 95. Setting ϕ = ϕ^{n.p.} the remaining weights were estimated by numerically maximizing (using CMAES) the penalized joint loglikelihood [17]:
with respect to Θ = (w_{1},...,w_{P1}). Smoothness of ϕ^{n.p.} was controlled by the parameter s = 2. The quadratic penalty in Eq. 19 corresponded to a Gaussian prior with zero mean and standard deviation s on the differences w_{ p } w_{p+1}.
List of parametric potentials
Potentials were parameterized as ϕ(d) = ϵf((d  t)/σ) with interaction strength ϵ, length scale σ, and threshold t = 0. Their shapes f(·) were defined as:

Hermquist potential:
(20) 
Linear potential, type 1:
(21) 
Linear potential, type 2:
(22) 
Plummer potential: defined in Eq. 12.
Implementation
All software was implemented in MATLAB version 7.9 (The Mathworks, Inc.) and run on a 2.66 GHz Intel Core2 Duo machine. Estimation of twoparameter potentials (Eqs. 12 and 20 to 22) took a few milliseconds per cell. Computation of q(d) took about one second. This time, however, strongly depended on the sampling resolution used. The nonparametric test for interaction took about half a second per cell. The time needed to estimate the common scale parameter for all cells was around ten minutes. A constantly updated version of the developed software is freely available from the web site of the authors http://www.mosaic.ethz.ch/Downloads. The MATLAB functions, scripts, and sample data at the time of writing are contained in additional file 1.
References
 1.
Costes SV, Daelemans D, Cho EH, Dobbin Z, Pavlakis G, Lockett S: Automatic and quantitative measurement of proteinprotein colocalization in live cells. Biophys J 2004, 86(6):3993–4003. 10.1529/biophysj.103.038422
 2.
Bolte S, Cordelieres FP: A guided tour into subcellular colocalization analysis in light microscopy. J Microsc 2006, 224: 213–232. 10.1111/j.13652818.2006.01706.x
 3.
Anlauf E, Derouiche A: A practical calibration procedure for fluorescence colocalization at the single organelle level. J Microsc 2009, 233: 225–233. 10.1111/j.13652818.2009.03112.x
 4.
Thompson RE, Larson DR, Webb WW: Precise nanometer localization analysis for individual fluorescent probes. Biophys J 2002, 82(5):2775–2783. 10.1016/S00063495(02)75618X
 5.
Helmuth JA, Burckhardt CJ, Greber UF, Sbalzarini IF: Shape reconstruction of subcellular structures from live cell fluorescence microscopy images. J Struct Biol 2009, 167: 1–10. 10.1016/j.jsb.2009.03.017
 6.
Sbalzarini IF, Koumoutsakos P: Feature point tracking and trajectory analysis for video imaging in cell biology. J Struct Biol 2005, 151(2):182–195. 10.1016/j.jsb.2005.06.002
 7.
Zhang B, Chenouard N, OlivioMarin JC, MeasYedid V: Statistical Colocalization in Biological Imaging with False Discovery Control. Proceedings of the 2008 IEEE International Symposium on Biomedical Imaging: From Nano to Macro: 14–17 May 2008; Paris, France 2008, 1327–1330. full_text
 8.
Lachmanovich E, Shvartsman DE, Malka Y, Botvin C, Henis YI, Weiss AM: Colocalization analysis of complex formation among membrane proteins by computerized fluorescence microscopy: application to immunofluorescence copatching studies. J Microsc 2003, 212(2):122–131. 10.1046/j.13652818.2003.01239.x
 9.
Møller J, Waagepetersen R: Statistical inference and simulation for spatial point processes. CRC Press; 2004.
 10.
Stoyan D, Penttinen A: Recent applications of point process methods in forestry statistics. Stat Sci 2000, 15: 61–78. 10.1214/ss/1009212674
 11.
Diggle PJ: Statistical Analysis of Spatial Point Patterns. 2nd edition. A Hodder Arnold Publication; 2003.
 12.
Assunção R: Score test for pairwise interaction parameters of Gibbs point processes. Braz J Probab Stat 2003, 17: 169–178.
 13.
Mellman I, Warren G: The road taken: Past and future foundations of membrane trafic. Cell 2000, 100: 99–112. 10.1016/S00928674(00)816876
 14.
Imelli N, Ruzsics Z, Puntener D, Gastaldelli M, Greber UF: Genetic reconstitution of the human Adenovirus type 2 temperaturesensitive 1 mutant defective in endosomal escape. Virol J 2009., 6(174):
 15.
Gastaldelli M, Imelli N, Boucke K, Amstutz B, Meier O, Greber UF: Infectious Adenovirus Type 2 Transport Through Early but not Late Endosomes. Trafic 2008, 9(12):2265–2278. 10.1111/j.16000854.2008.00835.x
 16.
Kozubek M, Matula P: An efficient algorithm for measurement and correction of chromatic aberrations in fluorescence microscopy. J Microsc 2000, 200: 206–217. 10.1046/j.13652818.2000.00754.x
 17.
Heikkinen J, Penttinen A: Bayesian smoothing in the estimation of the pair potential function of Gibbs point processes. Bernoulli 1999, 5(6):1119–1136. 10.2307/3318562
Acknowledgements
JAH was financed by the ETH Research Commission under grant TH10071. GP was funded through CTI grant 9325.2 PFLSLS from the Swiss Federal Commission for Technology and Innovation. This project was also supported with a grant from the Swiss SystemsX.ch initiative, grant LipidX2008/011 to IFS. The authors thank Christoph J. Burckhardt (Harvard University, Cambridge, MA) and Urs F. Greber (University of Zurich) for providing experimental data. JAH further thanks Rajesh Ramaswamy (ETH Zurich) for encouraging comments on early results and Christian Müller (ETH Zurich) for his help with CMAES.
Author information
Affiliations
Corresponding author
Additional information
Authors' contributions
JAH and GP developed the theory and analyzed the virus trafficking data. JAH designed, conducted, and analyzed numerical experiments and drafted the manuscript. GP participated in designing and analyzing the numerical experiments and helped in writing the manuscript. IFS participated in designing the theory and numerical experiments, helped writing and editing the manuscript, and coordinated the project. All authors read and approved the final manuscript.
Electronic supplementary material
MATLAB source code
Additional file 1: . ZIP archive containing the MATLAB source code for potentials, likelihood functions, and statistical tests, as well as sample scripts and sample data at the time of writing. (ZIP 15 KB)
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
About this article
Cite this article
Helmuth, J.A., Paul, G. & Sbalzarini, I.F. Beyond colocalization: inferring spatial interactions between subcellular structures from microscopy images. BMC Bioinformatics 11, 372 (2010). https://0doiorg.brum.beds.ac.uk/10.1186/1471210511372
Received:
Accepted:
Published:
DOI: https://0doiorg.brum.beds.ac.uk/10.1186/1471210511372
Keywords
 Monte Carlo
 Enhance Green Fluorescent Protein
 Interaction Strength
 Near Neighbor
 Distance Threshold